Brake repair question
#1
Guest
Posts: n/a
Brake repair question
I replaced my rotors and pads on my 1997 CRV with bendix parts. About
1000 miles later after driving at highway speed for 20 mile or so and
then going to slower speed around 35MPH I get squealing from the
brakes. I press the pedal to start stopping and the noise stops.
What did I do wrong, or miss? The vehicle started doing this before I
replaced the brakes, BUT I figured that it was worn parts becuase the
pedal vibrated too. The pedal no longer vibrates and the vehicle
seems to stop good. Thanks for your input.
Joel
1000 miles later after driving at highway speed for 20 mile or so and
then going to slower speed around 35MPH I get squealing from the
brakes. I press the pedal to start stopping and the noise stops.
What did I do wrong, or miss? The vehicle started doing this before I
replaced the brakes, BUT I figured that it was worn parts becuase the
pedal vibrated too. The pedal no longer vibrates and the vehicle
seems to stop good. Thanks for your input.
Joel
Thread
Thread Starter
Forum
Replies
Last Post
springs@mail.gr
Honda Mailing List
1
01-11-2012 11:08 AM
springsingreece@gmail.com
Hyundai Mailing List
0
05-02-2007 09:36 PM
springs@mail.gr
Honda Mailing List
0
05-02-2007 09:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)