|
cautionary tale
http://www.flickr.com/photos/38636024@N00/4162355180/
when is the last time you checked /your/ valve lash? don't you want to avoid this little problem? just pulled this from a civic with "an emissions problem". the incredible doofus that was ripping the owner off trying to "fix" the problem, simply welded in a second HUGE catalyst into the exhaust system. and was disappointed when it didn't work! then they removed the bulb from the "check engine" light... |
Re: cautionary tale
jim beam <me@privacy.net> wrote in
news:I_mdnaThKsq11obWnZ2dnUVZ_oCdnZ2d@speakeasy.ne t: > http://www.flickr.com/photos/38636024@N00/4162355180/ > > when is the last time you checked /your/ valve lash? don't you want to > avoid this little problem? > > just pulled this from a civic with "an emissions problem". the > incredible doofus that was ripping the owner off trying to "fix" the > problem, simply welded in a second HUGE catalyst into the exhaust > system. and was disappointed when it didn't work! then they removed > the bulb from the "check engine" light... > > Wow! Nobody noticed the lumpy idle? I do my valves once a year, which equates to about 25,000 miles. I find perhaps one or two that have moved maybe a thou. Some years there's no noticeable change to any of them. I suspect this valve came fom an engine that may have NEVER had its valved checked. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: cautionary tale
On 12/06/2009 05:37 AM, Tegger wrote:
> jim beam<me@privacy.net> wrote in > news:I_mdnaThKsq11obWnZ2dnUVZ_oCdnZ2d@speakeasy.ne t: > >> http://www.flickr.com/photos/38636024@N00/4162355180/ >> >> when is the last time you checked /your/ valve lash? don't you want to >> avoid this little problem? >> >> just pulled this from a civic with "an emissions problem". the >> incredible doofus that was ripping the owner off trying to "fix" the >> problem, simply welded in a second HUGE catalyst into the exhaust >> system. and was disappointed when it didn't work! then they removed >> the bulb from the "check engine" light... >> >> > > > Wow! Nobody noticed the lumpy idle? d15b1 motor - unlike almost all other honda motors, the flywheel is /really/ heavy - it idled reasonably well. they should have noticed the lack of difference that plug made when pulling the lead though. a compression test might have helped too. initially, i suspected a thrown rod, [classic for "smooth idle" misfires] but a long screwdriver down the spark plug hole showed the piston still moving. > > I do my valves once a year, which equates to about 25,000 miles. I find > perhaps one or two that have moved maybe a thou. Some years there's no > noticeable change to any of them. I suspect this valve came fom an engine > that may have NEVER had its valved checked. i suspect it was done, but done badly. should leave the feeler gauge in when snugging up the lock nut so the adjuster doesn't move. |
Re: cautionary tale
jim beam wrote:
> On 12/06/2009 05:37 AM, Tegger wrote: >> jim beam<me@privacy.net> wrote in >> news:I_mdnaThKsq11obWnZ2dnUVZ_oCdnZ2d@speakeasy.ne t: >> >>> http://www.flickr.com/photos/38636024@N00/4162355180/ >>> >>> when is the last time you checked /your/ valve lash? don't you want to >>> avoid this little problem? >>> >>> just pulled this from a civic with "an emissions problem". the >>> incredible doofus that was ripping the owner off trying to "fix" the >>> problem, simply welded in a second HUGE catalyst into the exhaust >>> system. and was disappointed when it didn't work! then they removed >>> the bulb from the "check engine" light... >>> >>> >> >> >> Wow! Nobody noticed the lumpy idle? > > d15b1 motor - unlike almost all other honda motors, the flywheel is > /really/ heavy - it idled reasonably well. they should have noticed the > lack of difference that plug made when pulling the lead though. a > compression test might have helped too. > > initially, i suspected a thrown rod, [classic for "smooth idle" > misfires] but a long screwdriver down the spark plug hole showed the > piston still moving. > > >> >> I do my valves once a year, which equates to about 25,000 miles. I find >> perhaps one or two that have moved maybe a thou. Some years there's no >> noticeable change to any of them. I suspect this valve came fom an engine >> that may have NEVER had its valved checked. > > i suspect it was done, but done badly. should leave the feeler gauge in > when snugging up the lock nut so the adjuster doesn't move. > OK. Now you guys have ruined my quiet Sunday morning. Are you saying that valves should be or MUST be checked on a scheduled basis? Even when there are no other indications of a valve related problem? I have 145K on my 2000 Accord that runs smooth as silk. Should I take it in "just because"? |
Re: cautionary tale
In article <4b1be13b$0$5080$9a6e19ea@unlimited.newshosting.co m>,
Nasty <nasty@tampabay.rr.com> wrote: > OK. Now you guys have ruined my quiet Sunday morning. Are you saying > that valves should be or MUST be checked on a scheduled basis? Even when > there are no other indications of a valve related problem? > > I have 145K on my 2000 Accord that runs smooth as silk. Should I take it > in "just because"? The 2000 Accord owner's manual specifies valve adjustment every so many miles. At one time it was 15K miles, but I think yours is 30K miles. That is, if it's a 4 cylinder. My 02 Odyssey specifies to do it "as needed if you hear noise". That's marketing speak for "my God, it costs $300 to adjust valves on this silly thing! We can't tell them to do THAT every 30K miles!" |
Re: cautionary tale
Tegger wrote:
> > I do my valves once a year, which equates to about 25,000 miles. I find > perhaps one or two that have moved maybe a thou. Some years there's no > noticeable change to any of them. I suspect this valve came from an engine > that may have NEVER had its valved checked. Yea. I check my Accord once a year, more out of guilt than anything else. I don't expect to find that anything has moved more than a thou. Even with zero maintenance, you're got to wonder if they abused the engine somehow. Assuming the valves were set correctly at some time, it takes a lot of seat wear to eat up the clearance. (Right?) |
Re: cautionary tale
jim beam wrote:
> http://www.flickr.com/photos/38636024@N00/4162355180/ > > when is the last time you checked /your/ valve lash? don't you want to > avoid this little problem? > > just pulled this from a civic with "an emissions problem". the > incredible doofus that was ripping the owner off trying to "fix" the > problem, simply welded in a second HUGE catalyst into the exhaust > system. and was disappointed when it didn't work! then they removed > the bulb from the "check engine" light... > I haven't seen a valve that bad since my brother in law pulled in the driveway with his Fiat just barely able to make it up hills in the early 80's. All four exhaust valves were burned, not because of bad lash, but because a helpful "mechanic" had removed the air pump belt to give him more power without bothering to re-jet the carburettor appropriately. The extremely lean mixture, unleaded fuel, and the non-sodium-filled valves did the rest. One of the valves was about 40% gone. We were able to recut the seats without replacing them, but valve height with new valves was just barely within spec. The job was an incredible pain in the neck, and led to a "No Fiats" rule in my driveway that has lasted until this day...I'd sooner replace the clutch on an Accord on jackstands. -- JRE |
Re: cautionary tale
On 12/06/2009 09:17 AM, Elmo P. Shagnasty wrote:
> In article<4b1be13b$0$5080$9a6e19ea@unlimited.newshos ting.com>, > Nasty<nasty@tampabay.rr.com> wrote: > >> OK. Now you guys have ruined my quiet Sunday morning. Are you saying >> that valves should be or MUST be checked on a scheduled basis? Even when >> there are no other indications of a valve related problem? >> >> I have 145K on my 2000 Accord that runs smooth as silk. Should I take it >> in "just because"? > > The 2000 Accord owner's manual specifies valve adjustment every so many > miles. At one time it was 15K miles, but I think yours is 30K miles. > That is, if it's a 4 cylinder. > > My 02 Odyssey specifies to do it "as needed if you hear noise". That's > marketing speak for "my God, it costs $300 to adjust valves on this > silly thing! We can't tell them to do THAT every 30K miles!" how much does it cost for a head gasket replacement? because that's essentially what you're looking at. |
Re: cautionary tale
On 12/06/2009 10:23 AM, Greg wrote:
> Tegger wrote: > >> >> I do my valves once a year, which equates to about 25,000 miles. I >> find perhaps one or two that have moved maybe a thou. Some years >> there's no noticeable change to any of them. I suspect this valve came >> from an engine that may have NEVER had its valved checked. > > Yea. I check my Accord once a year, more out of guilt than anything > else. I don't expect to find that anything has moved more than a thou. > > Even with zero maintenance, you're got to wonder if they abused the > engine somehow. Assuming the valves were set correctly at some time, it > takes a lot of seat wear to eat up the clearance. (Right?) it's not just seat wear - the valve heads soften ever so slightly as they warm up, so extended use at high speed, with the normal hammering effect of operation, means the seats bash impressions into the head. that closes clearances quite effectively. you can almost see that in the pic. if you're just pottering about town, it's not so much of a problem. when i used to do more high speed [high temp] runs, my biannual checks were much more likely to show a need for adjustment. |
Re: cautionary tale
In article <W6GdnaZq29SLZIbWnZ2dnUVZ_qudnZ2d@speakeasy.net> ,
jim beam <me@privacy.net> wrote: > > My 02 Odyssey specifies to do it "as needed if you hear noise". That's > > marketing speak for "my God, it costs $300 to adjust valves on this > > silly thing! We can't tell them to do THAT every 30K miles!" > > how much does it cost for a head gasket replacement? because that's > essentially what you're looking at. Hadn't thought of it that way. Good question. |
Re: cautionary tale
jim beam <me@privacy.net> wrote in
news:B-adndINYprBWYbWnZ2dnUVZ_jCdnZ2d@speakeasy.net: > On 12/06/2009 05:37 AM, Tegger wrote: >> >> I suspect this valve >> came fom an engine that may have NEVER had its valved checked. > > > i suspect it was done, but done badly. should leave the feeler gauge > in when snugging up the lock nut so the adjuster doesn't move. > I suppose you could do it that way, but I've been doing valves for almost 30 years and have never left the gauge in. All I do is to make careful note of the position of the screwdriver slot at the correct clearance setting, and make a tiny adjustment down to allow for the slight gain in clearance you get when you snug the nut again. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: cautionary tale
"Elmo P. Shagnasty" <elmop@nastydesigns.com> wrote in
news:elmop-46407D.12172006122009@nothing.attdns.com: > In article <4b1be13b$0$5080$9a6e19ea@unlimited.newshosting.co m>, > Nasty <nasty@tampabay.rr.com> wrote: > >> OK. Now you guys have ruined my quiet Sunday morning. Are you saying >> that valves should be or MUST be checked on a scheduled basis? Even >> when there are no other indications of a valve related problem? >> >> I have 145K on my 2000 Accord that runs smooth as silk. Should I take >> it in "just because"? > > The 2000 Accord owner's manual specifies valve adjustment every so > many miles. At one time it was 15K miles, but I think yours is 30K > miles. That is, if it's a 4 cylinder. > > My 02 Odyssey specifies to do it "as needed if you hear noise". > That's marketing speak for "my God, it costs $300 to adjust valves on > this silly thing! We can't tell them to do THAT every 30K miles!" That's also kind of silly (to my mind) because it's REDUCED valve clearances that do the big damage. You can't hear reduced clearances. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: cautionary tale
Greg <nospam@null.net> wrote in news:kDSSm.86253$Wf2.21270@newsfe23.iad:
> Tegger wrote: > >> >> I do my valves once a year, which equates to about 25,000 miles. I >> find perhaps one or two that have moved maybe a thou. Some years >> there's no noticeable change to any of them. I suspect this valve >> came from an engine that may have NEVER had its valved checked. > > Yea. I check my Accord once a year, more out of guilt than anything > else. I don't expect to find that anything has moved more than a > thou. > > Even with zero maintenance, you're got to wonder if they abused the > engine somehow. Assuming the valves were set correctly at some time, > it takes a lot of seat wear to eat up the clearance. (Right?) I think it also has a lot to do with oil change intervals. The engine in question may have had an inadequate frequency of oil changes. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: cautionary tale
jim beam <me@privacy.net> wrote in
news:W6GdnaZq29SLZIbWnZ2dnUVZ_qudnZ2d@speakeasy.ne t: > On 12/06/2009 09:17 AM, Elmo P. Shagnasty wrote: >> In article<4b1be13b$0$5080$9a6e19ea@unlimited.newshos ting.com>, >> Nasty<nasty@tampabay.rr.com> wrote: >> >>> OK. Now you guys have ruined my quiet Sunday morning. Are you saying >>> that valves should be or MUST be checked on a scheduled basis? Even >>> when there are no other indications of a valve related problem? >>> >>> I have 145K on my 2000 Accord that runs smooth as silk. Should I >>> take it in "just because"? >> >> The 2000 Accord owner's manual specifies valve adjustment every so >> many miles. At one time it was 15K miles, but I think yours is 30K >> miles. That is, if it's a 4 cylinder. >> >> My 02 Odyssey specifies to do it "as needed if you hear noise". >> That's marketing speak for "my God, it costs $300 to adjust valves on >> this silly thing! We can't tell them to do THAT every 30K miles!" > > how much does it cost for a head gasket replacement? because that's > essentially what you're looking at. > head gasket,or valve cover gasket? -- Jim Yanik jyanik at localnet dot com |
Re: cautionary tale
In article <Xns9CD9A21A3FC71tegger@208.90.168.18>,
Tegger <invalid@invalid.inv> wrote: > > My 02 Odyssey specifies to do it "as needed if you hear noise". > > That's marketing speak for "my God, it costs $300 to adjust valves on > > this silly thing! We can't tell them to do THAT every 30K miles!" > > > > That's also kind of silly (to my mind) because it's REDUCED valve > clearances that do the big damage. You can't hear reduced clearances. Further proof that the marketing department writes the owner's manuals? "Oh, look, the person who owns THIS vehicle will spend only $136 PER YEAR in maintenance!!!" Yeah, right. |
Re: cautionary tale
Jim Yanik wrote:
> jim beam <me@privacy.net> wrote in > news:W6GdnaZq29SLZIbWnZ2dnUVZ_qudnZ2d@speakeasy.ne t: > >> On 12/06/2009 09:17 AM, Elmo P. Shagnasty wrote: >>> In article<4b1be13b$0$5080$9a6e19ea@unlimited.newshos ting.com>, >>> Nasty<nasty@tampabay.rr.com> wrote: >>> >>>> OK. Now you guys have ruined my quiet Sunday morning. Are you saying >>>> that valves should be or MUST be checked on a scheduled basis? Even >>>> when there are no other indications of a valve related problem? >>>> >>>> I have 145K on my 2000 Accord that runs smooth as silk. Should I >>>> take it in "just because"? >>> The 2000 Accord owner's manual specifies valve adjustment every so >>> many miles. At one time it was 15K miles, but I think yours is 30K >>> miles. That is, if it's a 4 cylinder. >>> >>> My 02 Odyssey specifies to do it "as needed if you hear noise". >>> That's marketing speak for "my God, it costs $300 to adjust valves on >>> this silly thing! We can't tell them to do THAT every 30K miles!" >> how much does it cost for a head gasket replacement? because that's >> essentially what you're looking at. >> > > head gasket,or valve cover gasket? > Head gasket. The valves can't be removed with the head installed, and that's the lion's share of the labor, usually. In addition to the head gasket and labor, there may be valves that need to be replaced and seats that need to be machined. If the head's off, resurfacing all the valves and seats at the same time is moderately cheap and nobody I know "just fixes the problem" while the head is off. Valve guide replacement costs somewhat more, but if the valves have been sealing OK with the old seals, then let the engine's age, the car's probable future life, and your conscience be your guide. Valve lash is both increased and decreased by engine wear. At least three things can contribute to an increase in the installed height of the valve. The first is normal seat and face wear causing it to rise in the head. The second is wear at the junction between the keeper and valve. The third, a particularly nasty problem that plagued exhaust valves in older Datsun L-series engines run at high (particularly, higher than recommended) engine speeds, is valve stretch (culminating in stem failure at the keeper if you didn't catch it soon enough). Valve lash is decreased by an increase in installed height, and increased by wear of the cam lobe, rocker arm, and lash pad. If the two balance out, the lash will stay about the same essentially "forever." If they do not, then it is helpful to know what is normal for the engine you are working with. I have found our Hondas (late 80's, early 90's) to be pretty balanced, rarely needing more than a thousandth or two of adjustment for two or three valves at the Honda-specified intervals. I don't know how later-model Hondas fare. Although knowing what to expect can be important, a reasonably reliable guide is consistency. If one valve is substantially different from the rest, and the locknut wasn't loose, and it was about the same as the others the last time, look further until you know why. If you have time to burn, there is absolutely nothing wrong with checking on things more often than recommended, and I used to do this. These days, though, I treat my cars rather more gently (though not *too* gently ;-) and have not had an engine problem in over a decade and a half. YMMV. -- JRE |
Re: cautionary tale
Tegger wrote:
>> Even with zero maintenance, you're got to wonder if they abused the >> engine somehow. Assuming the valves were set correctly at some time, >> it takes a lot of seat wear to eat up the clearance. (Right?) > I think it also has a lot to do with oil change intervals. The engine in > question may have had an inadequate frequency of oil changes. That was my first thought, that the owner had run some additive-free, buck-a-quart, SA rated oil, or hadn't bothered to change it at all. But in that case, it seems you'd expect accelerated cam lobe wear that would tend to open the lash clearance, if anything. Does the minuscule volume of blow-by oil aid valve seat lubrication in any way? Regarding the original picture, I've got to agree with Jim, that lots of high RPM and/or heat has worn or peened the valve to death. I'd like to see pics of the seats too. |
Re: cautionary tale
> I haven't seen a valve that bad since my brother in law pulled in the
> driveway with his Fiat just barely able to make it up hills in the early > 80's. Hey I resemble that remark, sold off my 1971 Fiat circa 1979 in just about that state! Replacedit for with Alfa and drove it until it ate a (sodium-filled) valve about eight years later. So far, in my experience, Hondas don't do that! J. |
Re: cautionary tale
On 12/06/2009 04:41 PM, Greg wrote:
> Tegger wrote: > >>> Even with zero maintenance, you're got to wonder if they abused the >>> engine somehow. Assuming the valves were set correctly at some time, >>> it takes a lot of seat wear to eat up the clearance. (Right?) > >> I think it also has a lot to do with oil change intervals. The engine >> in question may have had an inadequate frequency of oil changes. > > That was my first thought, that the owner had run some additive-free, > buck-a-quart, SA rated oil, or hadn't bothered to change it at all. But > in that case, it seems you'd expect accelerated cam lobe wear that would > tend to open the lash clearance, if anything. > > Does the minuscule volume of blow-by oil aid valve seat lubrication in > any way? > > Regarding the original picture, I've got to agree with Jim, that lots of > high RPM and/or heat has worn or peened the valve to death. I'd like to > see pics of the seats too. the seats are fine. the damage you see is not just heat [and definitely not peening], but actual hot gas erosion. if you've ever used an oxy-acetylene cutting torch, you'll have created gouges like this in the steel you cut, only on a larger scale. bottom line, there are actually two potential causes of this: 1. insufficient valve lash causing leakage, heating and then erosion. 2. defect in the valve - a "soft spot" could start the leakage, and erosion takes hold from there. #1 is completely avoidable. |
Re: cautionary tale
On 12/06/2009 12:54 PM, Tegger wrote:
> jim beam<me@privacy.net> wrote in > news:B-adndINYprBWYbWnZ2dnUVZ_jCdnZ2d@speakeasy.net: > >> On 12/06/2009 05:37 AM, Tegger wrote: >>> >>> I suspect this valve >>> came fom an engine that may have NEVER had its valved checked. >> >> >> i suspect it was done, but done badly. should leave the feeler gauge >> in when snugging up the lock nut so the adjuster doesn't move. >> > > > I suppose you could do it that way, but I've been doing valves for almost > 30 years and have never left the gauge in. > > All I do is to make careful note of the position of the screwdriver slot at > the correct clearance setting, and make a tiny adjustment down to allow for > the slight gain in clearance you get when you snug the nut again. > > well, provided the locking nuts are not crudded up, you can leave the gauge in and the adjuster won't turn as you tighten the lock nut. makes it a quick one-handed operation. if there's crud in the threads, you need the screwdriver and two hands as you say. |
Re: cautionary tale
jim beam <me@privacy.net> wrote in
news:4qadnfNgGai_TYDWnZ2dnUVZ_tqdnZ2d@speakeasy.ne t: > On 12/06/2009 12:54 PM, Tegger wrote: >> jim beam<me@privacy.net> wrote in >> news:B-adndINYprBWYbWnZ2dnUVZ_jCdnZ2d@speakeasy.net: >> >>> On 12/06/2009 05:37 AM, Tegger wrote: >>>> >>>> I suspect this valve >>>> came fom an engine that may have NEVER had its valved checked. >>> >>> >>> i suspect it was done, but done badly. should leave the feeler >>> gauge in when snugging up the lock nut so the adjuster doesn't move. >>> >> >> >> I suppose you could do it that way, but I've been doing valves for >> almost 30 years and have never left the gauge in. >> >> All I do is to make careful note of the position of the screwdriver >> slot at the correct clearance setting, and make a tiny adjustment >> down to allow for the slight gain in clearance you get when you snug >> the nut again. >> >> > > well, provided the locking nuts are not crudded up, you can leave the > gauge in and the adjuster won't turn as you tighten the lock nut. > makes it a quick one-handed operation. if there's crud in the > threads, you need the screwdriver and two hands as you say. > > My valve mechanism is squeaky-clean, with hardly any varnish, let alone crud. I cannot tighten the locknuts without holding the screwdriver still, otherwise the adjuster attempts to turn, even with a gauge in the way. You're putting 18ft/lbs of torque on that locknut, which is sufficient to push a lot of things around. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: cautionary tale
On 12/08/2009 05:21 AM, Tegger wrote:
> jim beam<me@privacy.net> wrote in > news:4qadnfNgGai_TYDWnZ2dnUVZ_tqdnZ2d@speakeasy.ne t: > >> On 12/06/2009 12:54 PM, Tegger wrote: >>> jim beam<me@privacy.net> wrote in >>> news:B-adndINYprBWYbWnZ2dnUVZ_jCdnZ2d@speakeasy.net: >>> >>>> On 12/06/2009 05:37 AM, Tegger wrote: >>>>> >>>>> I suspect this valve >>>>> came fom an engine that may have NEVER had its valved checked. >>>> >>>> >>>> i suspect it was done, but done badly. should leave the feeler >>>> gauge in when snugging up the lock nut so the adjuster doesn't move. >>>> >>> >>> >>> I suppose you could do it that way, but I've been doing valves for >>> almost 30 years and have never left the gauge in. >>> >>> All I do is to make careful note of the position of the screwdriver >>> slot at the correct clearance setting, and make a tiny adjustment >>> down to allow for the slight gain in clearance you get when you snug >>> the nut again. >>> >>> >> >> well, provided the locking nuts are not crudded up, you can leave the >> gauge in and the adjuster won't turn as you tighten the lock nut. >> makes it a quick one-handed operation. if there's crud in the >> threads, you need the screwdriver and two hands as you say. >> >> > > > > My valve mechanism is squeaky-clean, with hardly any varnish, let alone > crud. I cannot tighten the locknuts without holding the screwdriver still, > otherwise the adjuster attempts to turn, even with a gauge in the way. > You're putting 18ft/lbs of torque on that locknut, which is sufficient to > push a lot of things around. > > my daily d15 is clean also, and the adjusters stay put as described. the patient in the valve surgery case however, is crudded up, and a screwdriver is essential. |
Re: cautionary tale
Thus spake Tegger <invalid@invalid.inv> :
>"Elmo P. Shagnasty" <elmop@nastydesigns.com> wrote in >news:elmop-46407D.12172006122009@nothing.attdns.com: > >> In article <4b1be13b$0$5080$9a6e19ea@unlimited.newshosting.co m>, >> Nasty <nasty@tampabay.rr.com> wrote: >> >>> OK. Now you guys have ruined my quiet Sunday morning. Are you saying >>> that valves should be or MUST be checked on a scheduled basis? Even >>> when there are no other indications of a valve related problem? >>> >>> I have 145K on my 2000 Accord that runs smooth as silk. Should I take >>> it in "just because"? >> >> The 2000 Accord owner's manual specifies valve adjustment every so >> many miles. At one time it was 15K miles, but I think yours is 30K >> miles. That is, if it's a 4 cylinder. >> >> My 02 Odyssey specifies to do it "as needed if you hear noise". >> That's marketing speak for "my God, it costs $300 to adjust valves on >> this silly thing! We can't tell them to do THAT every 30K miles!" > > > >That's also kind of silly (to my mind) because it's REDUCED valve >clearances that do the big damage. You can't hear reduced clearances. Sure you can. It's that little "tink tink tink" sound of broken metal bouncing around inside the cylinder. -- - dillon I am not invalid I love my country, It's my government I fear. Hey, turnabout's fair play. |
Re: cautionary tale
Thus spake jim beam <me@privacy.net> :
>On 12/06/2009 05:37 AM, Tegger wrote: >> jim beam<me@privacy.net> wrote in >> news:I_mdnaThKsq11obWnZ2dnUVZ_oCdnZ2d@speakeasy.ne t: >> >>> http://www.flickr.com/photos/38636024@N00/4162355180/ >>> >>> when is the last time you checked /your/ valve lash? don't you want to >>> avoid this little problem? >>> >>> just pulled this from a civic with "an emissions problem". the >>> incredible doofus that was ripping the owner off trying to "fix" the >>> problem, simply welded in a second HUGE catalyst into the exhaust >>> system. and was disappointed when it didn't work! then they removed >>> the bulb from the "check engine" light... >>> >>> >> >> >> Wow! Nobody noticed the lumpy idle? > >d15b1 motor - unlike almost all other honda motors, the flywheel is >/really/ heavy - it idled reasonably well. they should have noticed the >lack of difference that plug made when pulling the lead though. a >compression test might have helped too. > >initially, i suspected a thrown rod, [classic for "smooth idle" >misfires] but a long screwdriver down the spark plug hole showed the >piston still moving. You said "thrown rod" and my years of drag racing tell me that usually means a see-through block, or at least an invisible pan. > > >> >> I do my valves once a year, which equates to about 25,000 miles. I find >> perhaps one or two that have moved maybe a thou. Some years there's no >> noticeable change to any of them. I suspect this valve came fom an engine >> that may have NEVER had its valved checked. > >i suspect it was done, but done badly. should leave the feeler gauge in >when snugging up the lock nut so the adjuster doesn't move. -- - dillon I am not invalid I love my country, It's my government I fear. Hey, turnabout's fair play. |
Re: cautionary tale
On 12/11/2009 05:18 PM, Dillon Pyron wrote:
> Thus spake jim beam<me@privacy.net> : > >> On 12/06/2009 05:37 AM, Tegger wrote: >>> jim beam<me@privacy.net> wrote in >>> news:I_mdnaThKsq11obWnZ2dnUVZ_oCdnZ2d@speakeasy.ne t: >>> >>>> http://www.flickr.com/photos/38636024@N00/4162355180/ >>>> >>>> when is the last time you checked /your/ valve lash? don't you want to >>>> avoid this little problem? >>>> >>>> just pulled this from a civic with "an emissions problem". the >>>> incredible doofus that was ripping the owner off trying to "fix" the >>>> problem, simply welded in a second HUGE catalyst into the exhaust >>>> system. and was disappointed when it didn't work! then they removed >>>> the bulb from the "check engine" light... >>>> >>>> >>> >>> >>> Wow! Nobody noticed the lumpy idle? >> >> d15b1 motor - unlike almost all other honda motors, the flywheel is >> /really/ heavy - it idled reasonably well. they should have noticed the >> lack of difference that plug made when pulling the lead though. a >> compression test might have helped too. >> >> initially, i suspected a thrown rod, [classic for "smooth idle" >> misfires] but a long screwdriver down the spark plug hole showed the >> piston still moving. > > You said "thrown rod" and my years of drag racing tell me that usually > means a see-through block, usually. but not always - depends how hard the motor was going when the cap finally let go. i was looking at one in a junk yard just recently. the head was off and there was no visible external damage to the block, but one piston was out of phase and rotated. you don't get /that/ with the rod still connected, regardless of holes. > or at least an invisible pan. > >> >> >>> >>> I do my valves once a year, which equates to about 25,000 miles. I find >>> perhaps one or two that have moved maybe a thou. Some years there's no >>> noticeable change to any of them. I suspect this valve came fom an engine >>> that may have NEVER had its valved checked. >> >> i suspect it was done, but done badly. should leave the feeler gauge in >> when snugging up the lock nut so the adjuster doesn't move. |
| All times are GMT -4. The time now is 12:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands