Re: Civic'91...Alignment problem!...
I had a similar problem in my crx except that it wore the insides of both my
brand new tyres (im from new zealand, different spelling) the problem was a cracked cross member and the wheels would change camber angles depending on driving which ate the insides of the tyres though i dont see how your problem would be similar but you could check the camber angles "Gershund" <gershund00@usa.com> wrote in message news:10pj8mljp7a58e5@corp.supernews.com... > I recently changed the rack and pinion myself (about 2 months ago), and took > it to the shop for alignment (4 wheels)!...I remember that before I was > taking it to the shop the tires got worn specially on the outer corners > (both in front), I'm afraid that just like a week ago, the alignment or > something else made my steering ( I don't know if it's the alignment) like > if there's is a "space in between", wich means that my steering plays > between feeling one side when I turn and when I go to the other one feels > likeno connection (I hope you know what I mean)!... > > I change the lower bal joints (both) and the arm joints from the steering > arms!...Do you know if I anything else could be at fault?...I have seen some > people talking about bushings!..Where are those at?..Is it easy to be > changed by a DIY like me?...Any squematic on the web where I can look at > it?...How much do they cost?.. > > I was wondering if my car has rubber mounts on the springs (shock absorbers) > that I have to look at and change!... > > Could it be possibly that the new rack and pinion was "bad" (Cardone > brand)?...How does a Civic "behaves" when the the steering pump is bad > and/or might be at fault?.. > > Any other inputs?.. > > Thank you in advance!.. > > > |
Re: Civic'91...Alignment problem!...
I had a similar problem in my crx except that it wore the insides of both my
brand new tyres (im from new zealand, different spelling) the problem was a cracked cross member and the wheels would change camber angles depending on driving which ate the insides of the tyres though i dont see how your problem would be similar but you could check the camber angles "Gershund" <gershund00@usa.com> wrote in message news:10pj8mljp7a58e5@corp.supernews.com... > I recently changed the rack and pinion myself (about 2 months ago), and took > it to the shop for alignment (4 wheels)!...I remember that before I was > taking it to the shop the tires got worn specially on the outer corners > (both in front), I'm afraid that just like a week ago, the alignment or > something else made my steering ( I don't know if it's the alignment) like > if there's is a "space in between", wich means that my steering plays > between feeling one side when I turn and when I go to the other one feels > likeno connection (I hope you know what I mean)!... > > I change the lower bal joints (both) and the arm joints from the steering > arms!...Do you know if I anything else could be at fault?...I have seen some > people talking about bushings!..Where are those at?..Is it easy to be > changed by a DIY like me?...Any squematic on the web where I can look at > it?...How much do they cost?.. > > I was wondering if my car has rubber mounts on the springs (shock absorbers) > that I have to look at and change!... > > Could it be possibly that the new rack and pinion was "bad" (Cardone > brand)?...How does a Civic "behaves" when the the steering pump is bad > and/or might be at fault?.. > > Any other inputs?.. > > Thank you in advance!.. > > > |
Re: Civic'91...Alignment problem!...
a good way to test is to go around a corner about 40k (or 28mph) where there
is a small hole in the road and make the inside wheel go over the hole, you should be able to feel if it is moving sideways, anyhow, i live in new zealand, if you were here i could tell you a great place to get one for about $20 or $30. try a japanese autospares place, you should get one for around $60 - $80 i think, im sure they have them where you live, see if you can find the crack first though, make sure it is the crossmember. otherwise it could be another suspension part, those are the only causes im aware of. good luck oh and check both left and right side suspension parts against each other to see if they are identical (eg no bends) "Gershund" <gershund00@usa.com> wrote in message news:10pjh8d9mffkmfd@corp.supernews.com... > It might be reasonable to think the crossmember is at fault!...My wheels do > change position like ou say ( I can sense it while I drive it), like if the > swing from side to side on it's axle!.. > > Where to I buy a new cross member?..How much are those?...I know I can get a > used one, but want to compare in price with a new one1.. > > Thank you for your post, Caleb!.. > > > "Caleb" <caleb@cet.co.nz> wrote in message > news:bKhmd.2733$9A.101885@news.xtra.co.nz... > > I had a similar problem in my crx except that it wore the insides of both > my > > brand new tyres (im from new zealand, different spelling) > > the problem was a cracked cross member and the wheels would change camber > > angles depending on driving which ate the insides of the tyres though i > dont > > see how your problem would be similar but you could check the camber > angles > > > > > > "Gershund" <gershund00@usa.com> wrote in message > > news:10pj8mljp7a58e5@corp.supernews.com... > > > I recently changed the rack and pinion myself (about 2 months ago), and > > took > > > it to the shop for alignment (4 wheels)!...I remember that before I was > > > taking it to the shop the tires got worn specially on the outer corners > > > (both in front), I'm afraid that just like a week ago, the alignment or > > > something else made my steering ( I don't know if it's the alignment) > like > > > if there's is a "space in between", wich means that my steering plays > > > between feeling one side when I turn and when I go to the other one > feels > > > likeno connection (I hope you know what I mean)!... > > > > > > I change the lower bal joints (both) and the arm joints from the > steering > > > arms!...Do you know if I anything else could be at fault?...I have seen > > some > > > people talking about bushings!..Where are those at?..Is it easy to be > > > changed by a DIY like me?...Any squematic on the web where I can look at > > > it?...How much do they cost?.. > > > > > > I was wondering if my car has rubber mounts on the springs (shock > > absorbers) > > > that I have to look at and change!... > > > > > > Could it be possibly that the new rack and pinion was "bad" (Cardone > > > brand)?...How does a Civic "behaves" when the the steering pump is bad > > > and/or might be at fault?.. > > > > > > Any other inputs?.. > > > > > > Thank you in advance!.. > > > > > > > > > > > > > > > > > > |
Re: Civic'91...Alignment problem!...
a good way to test is to go around a corner about 40k (or 28mph) where there
is a small hole in the road and make the inside wheel go over the hole, you should be able to feel if it is moving sideways, anyhow, i live in new zealand, if you were here i could tell you a great place to get one for about $20 or $30. try a japanese autospares place, you should get one for around $60 - $80 i think, im sure they have them where you live, see if you can find the crack first though, make sure it is the crossmember. otherwise it could be another suspension part, those are the only causes im aware of. good luck oh and check both left and right side suspension parts against each other to see if they are identical (eg no bends) "Gershund" <gershund00@usa.com> wrote in message news:10pjh8d9mffkmfd@corp.supernews.com... > It might be reasonable to think the crossmember is at fault!...My wheels do > change position like ou say ( I can sense it while I drive it), like if the > swing from side to side on it's axle!.. > > Where to I buy a new cross member?..How much are those?...I know I can get a > used one, but want to compare in price with a new one1.. > > Thank you for your post, Caleb!.. > > > "Caleb" <caleb@cet.co.nz> wrote in message > news:bKhmd.2733$9A.101885@news.xtra.co.nz... > > I had a similar problem in my crx except that it wore the insides of both > my > > brand new tyres (im from new zealand, different spelling) > > the problem was a cracked cross member and the wheels would change camber > > angles depending on driving which ate the insides of the tyres though i > dont > > see how your problem would be similar but you could check the camber > angles > > > > > > "Gershund" <gershund00@usa.com> wrote in message > > news:10pj8mljp7a58e5@corp.supernews.com... > > > I recently changed the rack and pinion myself (about 2 months ago), and > > took > > > it to the shop for alignment (4 wheels)!...I remember that before I was > > > taking it to the shop the tires got worn specially on the outer corners > > > (both in front), I'm afraid that just like a week ago, the alignment or > > > something else made my steering ( I don't know if it's the alignment) > like > > > if there's is a "space in between", wich means that my steering plays > > > between feeling one side when I turn and when I go to the other one > feels > > > likeno connection (I hope you know what I mean)!... > > > > > > I change the lower bal joints (both) and the arm joints from the > steering > > > arms!...Do you know if I anything else could be at fault?...I have seen > > some > > > people talking about bushings!..Where are those at?..Is it easy to be > > > changed by a DIY like me?...Any squematic on the web where I can look at > > > it?...How much do they cost?.. > > > > > > I was wondering if my car has rubber mounts on the springs (shock > > absorbers) > > > that I have to look at and change!... > > > > > > Could it be possibly that the new rack and pinion was "bad" (Cardone > > > brand)?...How does a Civic "behaves" when the the steering pump is bad > > > and/or might be at fault?.. > > > > > > Any other inputs?.. > > > > > > Thank you in advance!.. > > > > > > > > > > > > > > > > > > |
Civic'91...Alignment problem!...
I recently changed the rack and pinion myself (about 2 months ago), and took
it to the shop for alignment (4 wheels)!...I remember that before I was taking it to the shop the tires got worn specially on the outer corners (both in front), I'm afraid that just like a week ago, the alignment or something else made my steering ( I don't know if it's the alignment) like if there's is a "space in between", wich means that my steering plays between feeling one side when I turn and when I go to the other one feels likeno connection (I hope you know what I mean)!... I change the lower bal joints (both) and the arm joints from the steering arms!...Do you know if I anything else could be at fault?...I have seen some people talking about bushings!..Where are those at?..Is it easy to be changed by a DIY like me?...Any squematic on the web where I can look at it?...How much do they cost?.. I was wondering if my car has rubber mounts on the springs (shock absorbers) that I have to look at and change!... Could it be possibly that the new rack and pinion was "bad" (Cardone brand)?...How does a Civic "behaves" when the the steering pump is bad and/or might be at fault?.. Any other inputs?.. Thank you in advance!.. |
Re: Civic'91...Alignment problem!...
It might be reasonable to think the crossmember is at fault!...My wheels do
change position like ou say ( I can sense it while I drive it), like if the swing from side to side on it's axle!.. Where to I buy a new cross member?..How much are those?...I know I can get a used one, but want to compare in price with a new one1.. Thank you for your post, Caleb!.. "Caleb" <caleb@cet.co.nz> wrote in message news:bKhmd.2733$9A.101885@news.xtra.co.nz... > I had a similar problem in my crx except that it wore the insides of both my > brand new tyres (im from new zealand, different spelling) > the problem was a cracked cross member and the wheels would change camber > angles depending on driving which ate the insides of the tyres though i dont > see how your problem would be similar but you could check the camber angles > > > "Gershund" <gershund00@usa.com> wrote in message > news:10pj8mljp7a58e5@corp.supernews.com... > > I recently changed the rack and pinion myself (about 2 months ago), and > took > > it to the shop for alignment (4 wheels)!...I remember that before I was > > taking it to the shop the tires got worn specially on the outer corners > > (both in front), I'm afraid that just like a week ago, the alignment or > > something else made my steering ( I don't know if it's the alignment) like > > if there's is a "space in between", wich means that my steering plays > > between feeling one side when I turn and when I go to the other one feels > > likeno connection (I hope you know what I mean)!... > > > > I change the lower bal joints (both) and the arm joints from the steering > > arms!...Do you know if I anything else could be at fault?...I have seen > some > > people talking about bushings!..Where are those at?..Is it easy to be > > changed by a DIY like me?...Any squematic on the web where I can look at > > it?...How much do they cost?.. > > > > I was wondering if my car has rubber mounts on the springs (shock > absorbers) > > that I have to look at and change!... > > > > Could it be possibly that the new rack and pinion was "bad" (Cardone > > brand)?...How does a Civic "behaves" when the the steering pump is bad > > and/or might be at fault?.. > > > > Any other inputs?.. > > > > Thank you in advance!.. > > > > > > > > > |
Re: Civic'91...Alignment problem!...
It might be reasonable to think the crossmember is at fault!...My wheels do
change position like ou say ( I can sense it while I drive it), like if the swing from side to side on it's axle!.. Where to I buy a new cross member?..How much are those?...I know I can get a used one, but want to compare in price with a new one1.. Thank you for your post, Caleb!.. "Caleb" <caleb@cet.co.nz> wrote in message news:bKhmd.2733$9A.101885@news.xtra.co.nz... > I had a similar problem in my crx except that it wore the insides of both my > brand new tyres (im from new zealand, different spelling) > the problem was a cracked cross member and the wheels would change camber > angles depending on driving which ate the insides of the tyres though i dont > see how your problem would be similar but you could check the camber angles > > > "Gershund" <gershund00@usa.com> wrote in message > news:10pj8mljp7a58e5@corp.supernews.com... > > I recently changed the rack and pinion myself (about 2 months ago), and > took > > it to the shop for alignment (4 wheels)!...I remember that before I was > > taking it to the shop the tires got worn specially on the outer corners > > (both in front), I'm afraid that just like a week ago, the alignment or > > something else made my steering ( I don't know if it's the alignment) like > > if there's is a "space in between", wich means that my steering plays > > between feeling one side when I turn and when I go to the other one feels > > likeno connection (I hope you know what I mean)!... > > > > I change the lower bal joints (both) and the arm joints from the steering > > arms!...Do you know if I anything else could be at fault?...I have seen > some > > people talking about bushings!..Where are those at?..Is it easy to be > > changed by a DIY like me?...Any squematic on the web where I can look at > > it?...How much do they cost?.. > > > > I was wondering if my car has rubber mounts on the springs (shock > absorbers) > > that I have to look at and change!... > > > > Could it be possibly that the new rack and pinion was "bad" (Cardone > > brand)?...How does a Civic "behaves" when the the steering pump is bad > > and/or might be at fault?.. > > > > Any other inputs?.. > > > > Thank you in advance!.. > > > > > > > > > |
All times are GMT -4. The time now is 11:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands