Cold Air Intake reducer
#1
Guest
Posts: n/a
Cold Air Intake reducer
I need a black or green cold air intake reducer, approx 2 1/2 to 2". I have
checked the local harware stores as suggested for a rubber one, but standard
PVC does not com ein the size I need.
Any suggestions??
1992 Honda Prelude with the 2.2 motor
Eightupman
checked the local harware stores as suggested for a rubber one, but standard
PVC does not com ein the size I need.
Any suggestions??
1992 Honda Prelude with the 2.2 motor
Eightupman
#2
Guest
Posts: n/a
Re: Cold Air Intake reducer
"Eightupman" <eightupman@newemail.com> wrote in message
news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
>I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
>have
> checked the local harware stores as suggested for a rubber one, but
> standard
> PVC does not com ein the size I need.
>
> Any suggestions??
>
> 1992 Honda Prelude with the 2.2 motor
>
> Eightupman
Plumbing supply house.
Something like this, right?
http://www.wellspent.org/Category?c=9148
Or you local tuner shop, for these
http://www.diamondstarmotorsport.com/diyparts.shtml
#3
Guest
Posts: n/a
Re: Cold Air Intake reducer
"Eightupman" <eightupman@newemail.com> wrote in message
news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
>I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
>have
> checked the local harware stores as suggested for a rubber one, but
> standard
> PVC does not com ein the size I need.
>
> Any suggestions??
>
> 1992 Honda Prelude with the 2.2 motor
>
> Eightupman
Plumbing supply house.
Something like this, right?
http://www.wellspent.org/Category?c=9148
Or you local tuner shop, for these
http://www.diamondstarmotorsport.com/diyparts.shtml
#4
Guest
Posts: n/a
Re: Cold Air Intake reducer
Yes. As I mentioned, I went to the local plumbing supply houses, and the
standard pipe sizes that they carry do not fit.
The second website carries EXACTLY what I am looking for size wise, but not
the green that I really really need. Thank you.
However, I got experimental, and had a can of Duplicolor black interior
vinyl dye, and shot the yellow reducer that I have.
To my surprise, it worked extremely well, and does not even show yellow when
flexed. The only test now is how it would react to the heat of the engine
compartment.
Thanks
Eightupman
"Steve Bigelow" <stevebigelowXXX@rogers.com> wrote in message
newsNOdneNYA-OpXgLcRVn-qQ@rogers.com...
>
> "Eightupman" <eightupman@newemail.com> wrote in message
> news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
> >I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
> >have
> > checked the local harware stores as suggested for a rubber one, but
> > standard
> > PVC does not com ein the size I need.
> >
> > Any suggestions??
> >
> > 1992 Honda Prelude with the 2.2 motor
> >
> > Eightupman
>
>
> Plumbing supply house.
> Something like this, right?
> http://www.wellspent.org/Category?c=9148
>
> Or you local tuner shop, for these
> http://www.diamondstarmotorsport.com/diyparts.shtml
>
>
standard pipe sizes that they carry do not fit.
The second website carries EXACTLY what I am looking for size wise, but not
the green that I really really need. Thank you.
However, I got experimental, and had a can of Duplicolor black interior
vinyl dye, and shot the yellow reducer that I have.
To my surprise, it worked extremely well, and does not even show yellow when
flexed. The only test now is how it would react to the heat of the engine
compartment.
Thanks
Eightupman
"Steve Bigelow" <stevebigelowXXX@rogers.com> wrote in message
newsNOdneNYA-OpXgLcRVn-qQ@rogers.com...
>
> "Eightupman" <eightupman@newemail.com> wrote in message
> news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
> >I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
> >have
> > checked the local harware stores as suggested for a rubber one, but
> > standard
> > PVC does not com ein the size I need.
> >
> > Any suggestions??
> >
> > 1992 Honda Prelude with the 2.2 motor
> >
> > Eightupman
>
>
> Plumbing supply house.
> Something like this, right?
> http://www.wellspent.org/Category?c=9148
>
> Or you local tuner shop, for these
> http://www.diamondstarmotorsport.com/diyparts.shtml
>
>
#5
Guest
Posts: n/a
Re: Cold Air Intake reducer
Yes. As I mentioned, I went to the local plumbing supply houses, and the
standard pipe sizes that they carry do not fit.
The second website carries EXACTLY what I am looking for size wise, but not
the green that I really really need. Thank you.
However, I got experimental, and had a can of Duplicolor black interior
vinyl dye, and shot the yellow reducer that I have.
To my surprise, it worked extremely well, and does not even show yellow when
flexed. The only test now is how it would react to the heat of the engine
compartment.
Thanks
Eightupman
"Steve Bigelow" <stevebigelowXXX@rogers.com> wrote in message
newsNOdneNYA-OpXgLcRVn-qQ@rogers.com...
>
> "Eightupman" <eightupman@newemail.com> wrote in message
> news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
> >I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
> >have
> > checked the local harware stores as suggested for a rubber one, but
> > standard
> > PVC does not com ein the size I need.
> >
> > Any suggestions??
> >
> > 1992 Honda Prelude with the 2.2 motor
> >
> > Eightupman
>
>
> Plumbing supply house.
> Something like this, right?
> http://www.wellspent.org/Category?c=9148
>
> Or you local tuner shop, for these
> http://www.diamondstarmotorsport.com/diyparts.shtml
>
>
standard pipe sizes that they carry do not fit.
The second website carries EXACTLY what I am looking for size wise, but not
the green that I really really need. Thank you.
However, I got experimental, and had a can of Duplicolor black interior
vinyl dye, and shot the yellow reducer that I have.
To my surprise, it worked extremely well, and does not even show yellow when
flexed. The only test now is how it would react to the heat of the engine
compartment.
Thanks
Eightupman
"Steve Bigelow" <stevebigelowXXX@rogers.com> wrote in message
newsNOdneNYA-OpXgLcRVn-qQ@rogers.com...
>
> "Eightupman" <eightupman@newemail.com> wrote in message
> news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
> >I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
> >have
> > checked the local harware stores as suggested for a rubber one, but
> > standard
> > PVC does not com ein the size I need.
> >
> > Any suggestions??
> >
> > 1992 Honda Prelude with the 2.2 motor
> >
> > Eightupman
>
>
> Plumbing supply house.
> Something like this, right?
> http://www.wellspent.org/Category?c=9148
>
> Or you local tuner shop, for these
> http://www.diamondstarmotorsport.com/diyparts.shtml
>
>
Thread
Thread Starter
Forum
Replies
Last Post
bigbubba131
honda / acura
4
11-30-2007 10:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)