Connecting a Tach Meter to a 1987 Honda Accord
Hello:
I bought a tach meter at Sears to perform some tests on my 1987 Honda Accord LX. The red clip goes to the + battery terminal, the black clip goes to engine ground. For tach tests, there is also a green clip, which the tach manual says needs to be connected to the negative (-) side of the ignition coil. The problem is that 1987 Honda Accords use a type of ignition coil that has three connections: one is a 2ry winding terminal that connects to the distributor. Then it has two 1ry winding terminals: 2 pins per terminal. On the left terminal you have pins D & C and on the right terminal you have pins B & A. Where should the green wire go for tach measurement tests? Thanks! MC |
All times are GMT -4. The time now is 05:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands