Coolent Drain Bolts for 97 Accord V6
Hello:
I am trying to drain and refill coolant for 97 Accord V6. I can locate the air-bleeding bolt, but can't locate the two drain bolts on engine body. can anyone send a drawing, which I can locate the drain bolts. Many thanks in advance, Anthony |
Re: Coolent Drain Bolts for 97 Accord V6
By any chance do you mean the radiator drain bolt?
A typical Honda (or I suppose most any car) has, in addition to the air bleed valve, at least one radiator drain bolt and at least one engine block drain bolt. For the radiator drain bolt, try putting your car info in at http://www.hondaautomotiveparts.com/...catdisplay.jsp , then select "Radiator." The info for a V-6 unfortunately appears to be rather incomplete. Maybe get some ideas from this site for other Accords listed. Or www.slhonda.com may have the radiator drawings for your V-6. Also, did you check your owner's manual for directions on this? If so, sorry to state the obvious. Some folks aren't aware the owner's manual has good info, including drawings, on maintenance in it. "Antonio" <nhuangus@yahoo.com> wrote > Hello: > > I am trying to drain and refill coolant for 97 Accord V6. I can locate the > air-bleeding bolt, but can't locate the two drain bolts on engine body. can > anyone send a drawing, which I can locate the drain bolts. |
Re: Coolent Drain Bolts for 97 Accord V6
By any chance do you mean the radiator drain bolt?
A typical Honda (or I suppose most any car) has, in addition to the air bleed valve, at least one radiator drain bolt and at least one engine block drain bolt. For the radiator drain bolt, try putting your car info in at http://www.hondaautomotiveparts.com/...catdisplay.jsp , then select "Radiator." The info for a V-6 unfortunately appears to be rather incomplete. Maybe get some ideas from this site for other Accords listed. Or www.slhonda.com may have the radiator drawings for your V-6. Also, did you check your owner's manual for directions on this? If so, sorry to state the obvious. Some folks aren't aware the owner's manual has good info, including drawings, on maintenance in it. "Antonio" <nhuangus@yahoo.com> wrote > Hello: > > I am trying to drain and refill coolant for 97 Accord V6. I can locate the > air-bleeding bolt, but can't locate the two drain bolts on engine body. can > anyone send a drawing, which I can locate the drain bolts. |
Re: Coolent Drain Bolts for 97 Accord V6
Hi Caroline:
I found the radiator drain bolt, but can't find drain bolts on engine block. The user manual doesn't give very clear drawing about their location, it only says there are two bolts on either side of engine block. Tried the two links, but no luck. Any another way to find the info? Antonio "Caroline" <caroline10027remove@earthlink.net> wrote in message news:kTAOc.3654$9Y6.3221@newsread1.news.pas.earthl ink.net... > By any chance do you mean the radiator drain bolt? > > A typical Honda (or I suppose most any car) has, in addition to the air bleed > valve, at least one radiator drain bolt and at least one engine block drain > bolt. > > For the radiator drain bolt, try putting your car info in at > http://www.hondaautomotiveparts.com/...catdisplay.jsp , then select > "Radiator." > > The info for a V-6 unfortunately appears to be rather incomplete. Maybe get some > ideas from this site for other Accords listed. Or www.slhonda.com may have the > radiator drawings for your V-6. > > Also, did you check your owner's manual for directions on this? If so, sorry to > state the obvious. Some folks aren't aware the owner's manual has good info, > including drawings, on maintenance in it. > > > "Antonio" <nhuangus@yahoo.com> wrote > > Hello: > > > > I am trying to drain and refill coolant for 97 Accord V6. I can locate the > > air-bleeding bolt, but can't locate the two drain bolts on engine body. can > > anyone send a drawing, which I can locate the drain bolts. > > |
Re: Coolent Drain Bolts for 97 Accord V6
Hi Caroline:
I found the radiator drain bolt, but can't find drain bolts on engine block. The user manual doesn't give very clear drawing about their location, it only says there are two bolts on either side of engine block. Tried the two links, but no luck. Any another way to find the info? Antonio "Caroline" <caroline10027remove@earthlink.net> wrote in message news:kTAOc.3654$9Y6.3221@newsread1.news.pas.earthl ink.net... > By any chance do you mean the radiator drain bolt? > > A typical Honda (or I suppose most any car) has, in addition to the air bleed > valve, at least one radiator drain bolt and at least one engine block drain > bolt. > > For the radiator drain bolt, try putting your car info in at > http://www.hondaautomotiveparts.com/...catdisplay.jsp , then select > "Radiator." > > The info for a V-6 unfortunately appears to be rather incomplete. Maybe get some > ideas from this site for other Accords listed. Or www.slhonda.com may have the > radiator drawings for your V-6. > > Also, did you check your owner's manual for directions on this? If so, sorry to > state the obvious. Some folks aren't aware the owner's manual has good info, > including drawings, on maintenance in it. > > > "Antonio" <nhuangus@yahoo.com> wrote > > Hello: > > > > I am trying to drain and refill coolant for 97 Accord V6. I can locate the > > air-bleeding bolt, but can't locate the two drain bolts on engine body. can > > anyone send a drawing, which I can locate the drain bolts. > > |
Re: Coolent Drain Bolts for 97 Accord V6
Here's a drawing of one of the engine block drain plugs on a 1998 Accord V-6.
It's item 9: http://tinyurl.com/5a9vp You'll likely have to remove (or maneuver around) some interference to get to it. Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, maybe 21 or 23 mm. The point is that the bolt head is larger than any other bolt head in the vicinity. Public libraries often have Chilton manuals for specific Honda makes. The Chilton drawings are often helpful. Keep checking back here as someone may post with more specifics. "Antonio" <nhuangus@yahoo.com> wrote > Hi Caroline: > > I found the radiator drain bolt, but can't find drain bolts on engine block. > The user manual doesn't give very clear drawing about their location, it > only says there are two bolts on either side of engine block. > > Tried the two links, but no luck. Any another way to find the info? |
Re: Coolent Drain Bolts for 97 Accord V6
Here's a drawing of one of the engine block drain plugs on a 1998 Accord V-6.
It's item 9: http://tinyurl.com/5a9vp You'll likely have to remove (or maneuver around) some interference to get to it. Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, maybe 21 or 23 mm. The point is that the bolt head is larger than any other bolt head in the vicinity. Public libraries often have Chilton manuals for specific Honda makes. The Chilton drawings are often helpful. Keep checking back here as someone may post with more specifics. "Antonio" <nhuangus@yahoo.com> wrote > Hi Caroline: > > I found the radiator drain bolt, but can't find drain bolts on engine block. > The user manual doesn't give very clear drawing about their location, it > only says there are two bolts on either side of engine block. > > Tried the two links, but no luck. Any another way to find the info? |
Re: Coolent Drain Bolts for 97 Accord V6
Please note that those block drains are usually a BEAR to get out.
"Caroline" <caroline10027remove@earthlink.net> wrote in message news:vAFOc.3902$9Y6.3256@newsread1.news.pas.earthl ink.net... > Here's a drawing of one of the engine block drain plugs on a 1998 Accord V-6. > It's item 9: http://tinyurl.com/5a9vp > > You'll likely have to remove (or maneuver around) some interference to get to > it. > > Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, maybe 21 > or 23 mm. The point is that the bolt head is larger than any other bolt head in > the vicinity. > > Public libraries often have Chilton manuals for specific Honda makes. The > Chilton drawings are often helpful. > > Keep checking back here as someone may post with more specifics. > > "Antonio" <nhuangus@yahoo.com> wrote > > Hi Caroline: > > > > I found the radiator drain bolt, but can't find drain bolts on engine block. > > The user manual doesn't give very clear drawing about their location, it > > only says there are two bolts on either side of engine block. > > > > Tried the two links, but no luck. Any another way to find the info? > > |
Re: Coolent Drain Bolts for 97 Accord V6
Please note that those block drains are usually a BEAR to get out.
"Caroline" <caroline10027remove@earthlink.net> wrote in message news:vAFOc.3902$9Y6.3256@newsread1.news.pas.earthl ink.net... > Here's a drawing of one of the engine block drain plugs on a 1998 Accord V-6. > It's item 9: http://tinyurl.com/5a9vp > > You'll likely have to remove (or maneuver around) some interference to get to > it. > > Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, maybe 21 > or 23 mm. The point is that the bolt head is larger than any other bolt head in > the vicinity. > > Public libraries often have Chilton manuals for specific Honda makes. The > Chilton drawings are often helpful. > > Keep checking back here as someone may post with more specifics. > > "Antonio" <nhuangus@yahoo.com> wrote > > Hi Caroline: > > > > I found the radiator drain bolt, but can't find drain bolts on engine block. > > The user manual doesn't give very clear drawing about their location, it > > only says there are two bolts on either side of engine block. > > > > Tried the two links, but no luck. Any another way to find the info? > > |
Re: Coolent Drain Bolts for 97 Accord V6
Which opens up the whole "do you drain the engine block or do you fuggetabout
that little amount of old coolant in there (if possible)" can of worms. It's true a lot of folks, if not changing coolant types (perhaps among other things), don't bother with the engine block drain bolts. "Steve Bigelow" <stevebigelowXXX@rogers.com> wrote > Please note that those block drains are usually a BEAR to get out. > > > "Caroline" <caroline10027remove@earthlink.net> wrote > > Here's a drawing of one of the engine block drain plugs on a 1998 Accord > V-6. > > It's item 9: http://tinyurl.com/5a9vp > > > > You'll likely have to remove (or maneuver around) some interference to get > to > > it. > > > > Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, > maybe 21 > > or 23 mm. The point is that the bolt head is larger than any other bolt > head in > > the vicinity. > > > > Public libraries often have Chilton manuals for specific Honda makes. The > > Chilton drawings are often helpful. > > > > Keep checking back here as someone may post with more specifics. > > > > "Antonio" <nhuangus@yahoo.com> wrote > > > Hi Caroline: > > > > > > I found the radiator drain bolt, but can't find drain bolts on engine > block. > > > The user manual doesn't give very clear drawing about their location, it > > > only says there are two bolts on either side of engine block. > > > > > > Tried the two links, but no luck. Any another way to find the info? > > > > > > |
Re: Coolent Drain Bolts for 97 Accord V6
Which opens up the whole "do you drain the engine block or do you fuggetabout
that little amount of old coolant in there (if possible)" can of worms. It's true a lot of folks, if not changing coolant types (perhaps among other things), don't bother with the engine block drain bolts. "Steve Bigelow" <stevebigelowXXX@rogers.com> wrote > Please note that those block drains are usually a BEAR to get out. > > > "Caroline" <caroline10027remove@earthlink.net> wrote > > Here's a drawing of one of the engine block drain plugs on a 1998 Accord > V-6. > > It's item 9: http://tinyurl.com/5a9vp > > > > You'll likely have to remove (or maneuver around) some interference to get > to > > it. > > > > Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, > maybe 21 > > or 23 mm. The point is that the bolt head is larger than any other bolt > head in > > the vicinity. > > > > Public libraries often have Chilton manuals for specific Honda makes. The > > Chilton drawings are often helpful. > > > > Keep checking back here as someone may post with more specifics. > > > > "Antonio" <nhuangus@yahoo.com> wrote > > > Hi Caroline: > > > > > > I found the radiator drain bolt, but can't find drain bolts on engine > block. > > > The user manual doesn't give very clear drawing about their location, it > > > only says there are two bolts on either side of engine block. > > > > > > Tried the two links, but no luck. Any another way to find the info? > > > > > > |
Re: Coolent Drain Bolts for 97 Accord V6
You are right about that. I don't mess with that. I just drain the radiator
and do it often. "Caroline" <caroline10027remove@earthlink.net> wrote in message news:KGNOc.3908$cK.1791@newsread2.news.pas.earthli nk.net... : Which opens up the whole "do you drain the engine block or do you fuggetabout : that little amount of old coolant in there (if possible)" can of worms. : : It's true a lot of folks, if not changing coolant types (perhaps among other : things), don't bother with the engine block drain bolts. : : "Steve Bigelow" <stevebigelowXXX@rogers.com> wrote : > Please note that those block drains are usually a BEAR to get out. : > : > : > "Caroline" <caroline10027remove@earthlink.net> wrote : > > Here's a drawing of one of the engine block drain plugs on a 1998 Accord : > V-6. : > > It's item 9: http://tinyurl.com/5a9vp : > > : > > You'll likely have to remove (or maneuver around) some interference to get : > to : > > it. : > > : > > Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, : > maybe 21 : > > or 23 mm. The point is that the bolt head is larger than any other bolt : > head in : > > the vicinity. : > > : > > Public libraries often have Chilton manuals for specific Honda makes. The : > > Chilton drawings are often helpful. : > > : > > Keep checking back here as someone may post with more specifics. : > > : > > "Antonio" <nhuangus@yahoo.com> wrote : > > > Hi Caroline: : > > > : > > > I found the radiator drain bolt, but can't find drain bolts on engine : > block. : > > > The user manual doesn't give very clear drawing about their location, it : > > > only says there are two bolts on either side of engine block. : > > > : > > > Tried the two links, but no luck. Any another way to find the info? : > > : > > : > : > : : |
Re: Coolent Drain Bolts for 97 Accord V6
You are right about that. I don't mess with that. I just drain the radiator
and do it often. "Caroline" <caroline10027remove@earthlink.net> wrote in message news:KGNOc.3908$cK.1791@newsread2.news.pas.earthli nk.net... : Which opens up the whole "do you drain the engine block or do you fuggetabout : that little amount of old coolant in there (if possible)" can of worms. : : It's true a lot of folks, if not changing coolant types (perhaps among other : things), don't bother with the engine block drain bolts. : : "Steve Bigelow" <stevebigelowXXX@rogers.com> wrote : > Please note that those block drains are usually a BEAR to get out. : > : > : > "Caroline" <caroline10027remove@earthlink.net> wrote : > > Here's a drawing of one of the engine block drain plugs on a 1998 Accord : > V-6. : > > It's item 9: http://tinyurl.com/5a9vp : > > : > > You'll likely have to remove (or maneuver around) some interference to get : > to : > > it. : > > : > > Note that it's a large diameter bolt: 28 mm. The head is smaller IIRC, : > maybe 21 : > > or 23 mm. The point is that the bolt head is larger than any other bolt : > head in : > > the vicinity. : > > : > > Public libraries often have Chilton manuals for specific Honda makes. The : > > Chilton drawings are often helpful. : > > : > > Keep checking back here as someone may post with more specifics. : > > : > > "Antonio" <nhuangus@yahoo.com> wrote : > > > Hi Caroline: : > > > : > > > I found the radiator drain bolt, but can't find drain bolts on engine : > block. : > > > The user manual doesn't give very clear drawing about their location, it : > > > only says there are two bolts on either side of engine block. : > > > : > > > Tried the two links, but no luck. Any another way to find the info? : > > : > > : > : > : : |
All times are GMT -4. The time now is 10:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands