Creaking noise when turning Honda CRX 1985
09-01-2007, 11:56 AM
#1
Guest
Posts: n/a
Creaking noise when turning Honda CRX 1985
I have a creaking noise when I turn either way in my honda earlier in
the year it was only to the extremes to almost full turn but now it is
getting so it does it when it is less. I also noticed it only usually
did it when i went left but not right at first but now it goes both
ways... Do I need to regrease the ball joints or what is going on???
the year it was only to the extremes to almost full turn but now it is
getting so it does it when it is less. I also noticed it only usually
did it when i went left but not right at first but now it goes both
ways... Do I need to regrease the ball joints or what is going on???
09-03-2007, 08:28 PM
#2
Guest
Posts: n/a
Re: Creaking noise when turning Honda CRX 1985
it's the lower ball joint going bad on one side or maybe both. it's probably
to late for grease. listen for what side you hear the noise from. if you can
grease them do it but if theyre sealed then you'll just need to replace them
or at least the one making noise. don't let them go like they are for long
or you'll be having a wheel cave in and you'll be replacing alot more than
the ball joint.
-jeff
<axeladam@gmail.com> wrote in message
news:1188662213.807568.245430@r29g2000hsg.googlegr oups.com...
>I have a creaking noise when I turn either way in my honda earlier in
> the year it was only to the extremes to almost full turn but now it is
> getting so it does it when it is less. I also noticed it only usually
> did it when i went left but not right at first but now it goes both
> ways... Do I need to regrease the ball joints or what is going on???
>
to late for grease. listen for what side you hear the noise from. if you can
grease them do it but if theyre sealed then you'll just need to replace them
or at least the one making noise. don't let them go like they are for long
or you'll be having a wheel cave in and you'll be replacing alot more than
the ball joint.
-jeff
<axeladam@gmail.com> wrote in message
news:1188662213.807568.245430@r29g2000hsg.googlegr oups.com...
>I have a creaking noise when I turn either way in my honda earlier in
> the year it was only to the extremes to almost full turn but now it is
> getting so it does it when it is less. I also noticed it only usually
> did it when i went left but not right at first but now it goes both
> ways... Do I need to regrease the ball joints or what is going on???
>
09-03-2007, 08:28 PM
#3
Guest
Posts: n/a
Re: Creaking noise when turning Honda CRX 1985
it's the lower ball joint going bad on one side or maybe both. it's probably
to late for grease. listen for what side you hear the noise from. if you can
grease them do it but if theyre sealed then you'll just need to replace them
or at least the one making noise. don't let them go like they are for long
or you'll be having a wheel cave in and you'll be replacing alot more than
the ball joint.
-jeff
<axeladam@gmail.com> wrote in message
news:1188662213.807568.245430@r29g2000hsg.googlegr oups.com...
>I have a creaking noise when I turn either way in my honda earlier in
> the year it was only to the extremes to almost full turn but now it is
> getting so it does it when it is less. I also noticed it only usually
> did it when i went left but not right at first but now it goes both
> ways... Do I need to regrease the ball joints or what is going on???
>
to late for grease. listen for what side you hear the noise from. if you can
grease them do it but if theyre sealed then you'll just need to replace them
or at least the one making noise. don't let them go like they are for long
or you'll be having a wheel cave in and you'll be replacing alot more than
the ball joint.
-jeff
<axeladam@gmail.com> wrote in message
news:1188662213.807568.245430@r29g2000hsg.googlegr oups.com...
>I have a creaking noise when I turn either way in my honda earlier in
> the year it was only to the extremes to almost full turn but now it is
> getting so it does it when it is less. I also noticed it only usually
> did it when i went left but not right at first but now it goes both
> ways... Do I need to regrease the ball joints or what is going on???
>
Thread
Thread Starter
Forum
Replies
Last Post
axeladam@gmail.com
Honda Mailing List
0
09-01-2007 11:56 AM
misterh78
Hyundai Mailing List
18
08-25-2006 06:58 PM
A Rangers Fan
Honda Mailing List
4
02-28-2005 01:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)