ECU code zero - 94 Accord
 

Hi there,

When I try to get the ECU trouble codes for my 94 Accord, after bridging the
required 2-wires terminal to activate the diagnostic codes and turning the
ignition switch to ON, the CHECK ENGINE light permanently stays ON without
blinking!

What does it mean? Is that the representation of Code 0 (i.e faulty ECU)?

If not, how is encoded the ECU code zero for Accord 94-97 models?

Also, what would the no-error case Check Engine light's behavior (that is,
when everything is ok with the car)?

Thanks a lot.
Robert

Re: ECU code zero - 94 Accord
 

Robert, I don't have the answer to your question. But since you did it
already, how do you obtain the ECU trouble code? what two wires do you
bridge? (I have a '92 Accord LX)


--
pjs7
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community.
http://www.RealCarAudio.com
pjs7's Profile: http://www.realcaraudio.com/forums/m...fo&userid=3912
View this thread: http://www.realcaraudio.com/forums/s...threadid=26565

Re: ECU code zero - 94 Accord
 

Robert, I don't have the answer to your question. But since you did it
already, how do you obtain the ECU trouble code? what two wires do you
bridge? (I have a '92 Accord LX)


--
pjs7
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community.
http://www.RealCarAudio.com
pjs7's Profile: http://www.realcaraudio.com/forums/m...fo&userid=3912
View this thread: http://www.realcaraudio.com/forums/s...threadid=26565

Re: ECU code zero - 94 Accord
 

Robert, I don't have the answer to your question. But since you did it
already, how do you obtain the ECU trouble code? what two wires do you
bridge? (I have a '92 Accord LX)


--
pjs7
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community.
http://www.RealCarAudio.com
pjs7's Profile: http://www.realcaraudio.com/forums/m...fo&userid=3912
View this thread: http://www.realcaraudio.com/forums/s...threadid=26565

Re: ECU code zero - 94 Accord
 

Robert, I don't have the answer to your question. But since you did it
already, how do you obtain the ECU trouble code? what two wires do you
bridge? (I have a '92 Accord LX)


--
pjs7
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community.
http://www.RealCarAudio.com
pjs7's Profile: http://www.realcaraudio.com/forums/m...fo&userid=3912
View this thread: http://www.realcaraudio.com/forums/s...threadid=26565