Gasket Sealant
 

I put on a new valve cover gasket and spark plug tub o-rings. I used
permatex, high temp rtv silicone gasket maker. All it says on the tube is
that it is completely cured in 24 hours. Does that mean it shouldn't be ran
in 24 hours or will it be ok to run it?

Re: Gasket Sealant
 

"Shredder" <trail@shred.com> wrote in message
news:itsUd.1673$wy3.684@newsread3.news.atl.earthli nk.net...
>I put on a new valve cover gasket and spark plug tub o-rings. I used
>permatex, high temp rtv silicone gasket maker. All it says on the tube is
>that it is completely cured in 24 hours. Does that mean it shouldn't be
>ran in 24 hours or will it be ok to run it?
>
It's okay to run right away. It will be soft and goopy if disassembled
before the stuff is fully cured, but you are just using it to ensure the
gaskets won't leak at all.

Mike

Re: Gasket Sealant
 

"Shredder" <trail@shred.com> wrote in message
news:itsUd.1673$wy3.684@newsread3.news.atl.earthli nk.net...
>I put on a new valve cover gasket and spark plug tub o-rings. I used
>permatex, high temp rtv silicone gasket maker. All it says on the tube is
>that it is completely cured in 24 hours. Does that mean it shouldn't be
>ran in 24 hours or will it be ok to run it?
>
It's okay to run right away. It will be soft and goopy if disassembled
before the stuff is fully cured, but you are just using it to ensure the
gaskets won't leak at all.

Mike