Getting to 86 Prelude 2.0si EGR
 

Hello all,

My idle is pretty rough and wandering after warm-up and after cleaning
out the IACV I figure the next step is to try and clean the EGR valve.
The only problem is, it is surrounded by all kinds of pipes and hoses
from the intake and vacuum (or possibly just the vacuum) systems. I
can't even get a socket with an extension down on it because of the
width of the top of the valve overshadows the bolts at the bottom of it
and the aforementioned hoses are on the other side. Does anyone have
experience getting to the damn thing? Any advice? I can post pictures
if necessary.

Thanks,
Bil