Headlamps for 2003 Accord
06-07-2006, 11:13 AM
#1
Guest
Posts: n/a
Headlamps for 2003 Accord
Recently one of the low beams on my 2003 Accord LX sedan went out. I
went down to the autoparts store and picked up a twin pack of Sylvania
9006's, according to the little book they got there. Problem is that
they don't fit. The hang-up seems to be that the bulb has one little
groove on the one side but the connector has two little tabs instead of
one. (I may have it reversed, but either way # tabs != # grooves).
Other than that the bulbs look pretty much the same. Anyone else run
into this?
went down to the autoparts store and picked up a twin pack of Sylvania
9006's, according to the little book they got there. Problem is that
they don't fit. The hang-up seems to be that the bulb has one little
groove on the one side but the connector has two little tabs instead of
one. (I may have it reversed, but either way # tabs != # grooves).
Other than that the bulbs look pretty much the same. Anyone else run
into this?
06-07-2006, 12:14 PM
#2
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
bcattwood@gmail.com wrote:
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
06-07-2006, 12:14 PM
#3
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
bcattwood@gmail.com wrote:
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
06-07-2006, 12:14 PM
#4
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
bcattwood@gmail.com wrote:
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
06-07-2006, 12:14 PM
#5
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
bcattwood@gmail.com wrote:
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
> Recently one of the low beams on my 2003 Accord LX sedan went out. I
> went down to the autoparts store and picked up a twin pack of Sylvania
> 9006's, according to the little book they got there. Problem is that
> they don't fit. The hang-up seems to be that the bulb has one little
> groove on the one side but the connector has two little tabs instead of
> one. (I may have it reversed, but either way # tabs != # grooves).
> Other than that the bulbs look pretty much the same. Anyone else run
> into this?
there's the 9005's and 9006's for high & low beams respectively. sounds
like there's a mix-up between the two. check one of the online parts
sources to get a visual i.d.
http://catalog.eautopartscatalog.com...Headlight+Bulb
06-07-2006, 01:18 PM
#6
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
jim beam wrote:
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
06-07-2006, 01:18 PM
#7
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
jim beam wrote:
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
06-07-2006, 01:18 PM
#8
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
jim beam wrote:
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
06-07-2006, 01:18 PM
#9
Guest
Posts: n/a
Re: Headlamps for 2003 Accord
jim beam wrote:
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
> bcattwood@gmail.com wrote:
> > Recently one of the low beams on my 2003 Accord LX sedan went out. I
> > went down to the autoparts store and picked up a twin pack of Sylvania
> > 9006's, according to the little book they got there. Problem is that
> > they don't fit. The hang-up seems to be that the bulb has one little
> > groove on the one side but the connector has two little tabs instead of
> > one. (I may have it reversed, but either way # tabs != # grooves).
> > Other than that the bulbs look pretty much the same. Anyone else run
> > into this?
>
> there's the 9005's and 9006's for high & low beams respectively. sounds
> like there's a mix-up between the two. check one of the online parts
> sources to get a visual i.d.
>
Ooops... it appears that maybe I didn't look close enough and actually
pulled the high beam bulb out of the car instead of the low beam.
Guess that would explain why the filament on the old one still looked
good, too. I think infant induced sleep deprivation must have dulled
my spatial skills.
Thanks for the link. Those pictures were much clearer than what I had
found.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
