Headlight bulb in 2005 Accord
 

Do I really need to remove the battery in order to have access to the driver's side bulb...?

Re: Headlight bulb in 2005 Accord
 

We had a 2005 hybrid sedan Accord and I replaced all front bulbs with HIR
bulbs without removing the battery. Some I followed the manual to do but
others I just winged it successfully.


"John" <sbnospam@gmail.com> wrote in message
news:3PKdnck17_Rt7BTanZ2dnUVZ_uWlnZ2d@rcn.net...
Do I really need to remove the battery in order to have access to the
driver's side bulb...?

Re: Headlight bulb in 2005 Accord
 

If it's the standard headlight bulbs you don't even need to pop the hood to
replace the bulbs, but they could still be a PITA. You'll need a flathead
screw driver. If it's the driver side bulb you want to turn the steering
wheel to the right. If it's the passenger bulb turn it to the left.

CAREFULLY pop about 3 clips off which are fastening the wheel well liner.
You'll need to reach under and twist the bulb out and unclip it from the
harness. The clips are easy to break if not careful. When you put the new
bulb in, make sure not to tuch the bulb with your fingers. This will leave
prints and grease, shortening the life of the new bulb. Once the new bulb
is twisted in and the liner replaced, everything should work!

Check the manual for instructions and possible diagrams.

-Dave



"Art" <begunaNOSPAMPLEASE@mindspring.com> wrote in message
news:13oj0nk1fn6s7b1@corp.supernews.com...
> We had a 2005 hybrid sedan Accord and I replaced all front bulbs with HIR
> bulbs without removing the battery. Some I followed the manual to do but
> others I just winged it successfully.
>
>
> "John" <sbnospam@gmail.com> wrote in message
> news:3PKdnck17_Rt7BTanZ2dnUVZ_uWlnZ2d@rcn.net...
> Do I really need to remove the battery in order to have access to the
> driver's side bulb...?
>

Re: Headlight bulb in 2005 Accord
 

That's the problem...I don't see any clips underneath in the wheel well, it
is all flat there.

--

"Dave L" <davelieuREMOVEME@yahoo.com> wrote in message
news:JJqdnXFKTplgOxTanZ2dnUVZ_sOrnZ2d@comcast.com. ..
> If it's the standard headlight bulbs you don't even need to pop the hood
> to replace the bulbs, but they could still be a PITA. You'll need a
> flathead screw driver. If it's the driver side bulb you want to turn the
> steering wheel to the right. If it's the passenger bulb turn it to the
> left.
>
> CAREFULLY pop about 3 clips off which are fastening the wheel well liner.
> You'll need to reach under and twist the bulb out and unclip it from the
> harness. The clips are easy to break if not careful. When you put the
> new bulb in, make sure not to tuch the bulb with your fingers. This will
> leave prints and grease, shortening the life of the new bulb. Once the
> new bulb is twisted in and the liner replaced, everything should work!
>
> Check the manual for instructions and possible diagrams.
>
> -Dave
>
>
>
> "Art" <begunaNOSPAMPLEASE@mindspring.com> wrote in message
> news:13oj0nk1fn6s7b1@corp.supernews.com...
>> We had a 2005 hybrid sedan Accord and I replaced all front bulbs with HIR
>> bulbs without removing the battery. Some I followed the manual to do but
>> others I just winged it successfully.
>>
>>
>> "John" <sbnospam@gmail.com> wrote in message
>> news:3PKdnck17_Rt7BTanZ2dnUVZ_uWlnZ2d@rcn.net...
>> Do I really need to remove the battery in order to have access to the
>> driver's side bulb...?
>>
>
>

Re: Headlight bulb in 2005 Accord
 

Remember to clean the new bulb with alchol to make sure there is no oil on
it before installing it.


"Dave L" <davelieuREMOVEME@yahoo.com> wrote in message
news:JJqdnXFKTplgOxTanZ2dnUVZ_sOrnZ2d@comcast.com. ..
> If it's the standard headlight bulbs you don't even need to pop the hood
> to replace the bulbs, but they could still be a PITA. You'll need a
> flathead screw driver. If it's the driver side bulb you want to turn the
> steering wheel to the right. If it's the passenger bulb turn it to the
> left.
>
> CAREFULLY pop about 3 clips off which are fastening the wheel well liner.
> You'll need to reach under and twist the bulb out and unclip it from the
> harness. The clips are easy to break if not careful. When you put the
> new bulb in, make sure not to tuch the bulb with your fingers. This will
> leave prints and grease, shortening the life of the new bulb. Once the
> new bulb is twisted in and the liner replaced, everything should work!
>
> Check the manual for instructions and possible diagrams.
>
> -Dave
>
>
>
> "Art" <begunaNOSPAMPLEASE@mindspring.com> wrote in message
> news:13oj0nk1fn6s7b1@corp.supernews.com...
>> We had a 2005 hybrid sedan Accord and I replaced all front bulbs with HIR
>> bulbs without removing the battery. Some I followed the manual to do but
>> others I just winged it successfully.
>>
>>
>> "John" <sbnospam@gmail.com> wrote in message
>> news:3PKdnck17_Rt7BTanZ2dnUVZ_uWlnZ2d@rcn.net...
>> Do I really need to remove the battery in order to have access to the
>> driver's side bulb...?
>>
>
>

Re: Headlight bulb in 2005 Accord
 

They are like black, round, plastic bolts holding the liner in place. It's
right on the edge of your fender. Those are the things holding the lining
in place. Have you checked the manual? I believe it may have diagrams in
there. When I couldn't figure out how to get to the bulb, that's the first
place I checked.

Take another look where I described and it'll be there.

Good luck!
-Dave


"John" <sbnospam@gmail.com> wrote in message
news:a4ednShWzqW2xg_anZ2dnUVZ_sKqnZ2d@rcn.net...
> That's the problem...I don't see any clips underneath in the wheel well,
> it is all flat there.
>
> --
>
> "Dave L" <davelieuREMOVEME@yahoo.com> wrote in message
> news:JJqdnXFKTplgOxTanZ2dnUVZ_sOrnZ2d@comcast.com. ..
>> If it's the standard headlight bulbs you don't even need to pop the hood
>> to replace the bulbs, but they could still be a PITA. You'll need a
>> flathead screw driver. If it's the driver side bulb you want to turn the
>> steering wheel to the right. If it's the passenger bulb turn it to the
>> left.
>>
>> CAREFULLY pop about 3 clips off which are fastening the wheel well liner.
>> You'll need to reach under and twist the bulb out and unclip it from the
>> harness. The clips are easy to break if not careful. When you put the
>> new bulb in, make sure not to tuch the bulb with your fingers. This will
>> leave prints and grease, shortening the life of the new bulb. Once the
>> new bulb is twisted in and the liner replaced, everything should work!
>>
>> Check the manual for instructions and possible diagrams.
>>
>> -Dave
>>
>>
>>
>> "Art" <begunaNOSPAMPLEASE@mindspring.com> wrote in message
>> news:13oj0nk1fn6s7b1@corp.supernews.com...
>>> We had a 2005 hybrid sedan Accord and I replaced all front bulbs with
>>> HIR bulbs without removing the battery. Some I followed the manual to
>>> do but others I just winged it successfully.
>>>
>>>
>>> "John" <sbnospam@gmail.com> wrote in message
>>> news:3PKdnck17_Rt7BTanZ2dnUVZ_uWlnZ2d@rcn.net...
>>> Do I really need to remove the battery in order to have access to the
>>> driver's side bulb...?
>>>
>>
>>
>
>