hot air
#1
Guest
Posts: n/a
hot air
I have an s reg Honda Shuttle and have just had a new rad fitted. when I
put on the blowers warm air comes through even when it is set oncool
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
More information at http://www.talkaboutautos.com/faq.html
put on the blowers warm air comes through even when it is set oncool
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
More information at http://www.talkaboutautos.com/faq.html
#2
Guest
Posts: n/a
Re: hot air
"corkey2007" <shaun.faulkner@sky.com> wrote in
news:f931bd704f010f0b8d6230734f5c4d88@localhost.ta lkaboutautos.com:
> I have an s reg Honda Shuttle and have just had a new rad fitted. when I
> put on the blowers warm air comes through even when it is set oncool
>
S-reg should be a '99.
Check the wire cable that goes to the heater control valve under the bonnet
near the bulkhead. It's probably slipped off the post.
If this is the case here, there is a quick fix that involves a piece of
clear vinyl tubing.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:f931bd704f010f0b8d6230734f5c4d88@localhost.ta lkaboutautos.com:
> I have an s reg Honda Shuttle and have just had a new rad fitted. when I
> put on the blowers warm air comes through even when it is set oncool
>
S-reg should be a '99.
Check the wire cable that goes to the heater control valve under the bonnet
near the bulkhead. It's probably slipped off the post.
If this is the case here, there is a quick fix that involves a piece of
clear vinyl tubing.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#3
Guest
Posts: n/a
Re: hot air
"corkey2007" <shaun.faulkner@sky.com> wrote in
news:f931bd704f010f0b8d6230734f5c4d88@localhost.ta lkaboutautos.com:
> I have an s reg Honda Shuttle and have just had a new rad fitted. when I
> put on the blowers warm air comes through even when it is set oncool
>
S-reg should be a '99.
Check the wire cable that goes to the heater control valve under the bonnet
near the bulkhead. It's probably slipped off the post.
If this is the case here, there is a quick fix that involves a piece of
clear vinyl tubing.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:f931bd704f010f0b8d6230734f5c4d88@localhost.ta lkaboutautos.com:
> I have an s reg Honda Shuttle and have just had a new rad fitted. when I
> put on the blowers warm air comes through even when it is set oncool
>
S-reg should be a '99.
Check the wire cable that goes to the heater control valve under the bonnet
near the bulkhead. It's probably slipped off the post.
If this is the case here, there is a quick fix that involves a piece of
clear vinyl tubing.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
Sham
Miscellaneous Stuff For Sale
0
07-28-2005 11:37 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)