How to remove brake shoes -- 2000 Civic
I replaced the front pads tonight and started to look at the rear shoes.
What's the easiest way to remove them? I was reading the online manual for a 1995-1997 Civic but the pics for the '97 are a little different than the 2000. Also how hard is it to replace the components for the rear wheel cylinder? Seems simple enough. Thanks Mike |
Re: How to remove brake shoes -- 2000 Civic
mike urig wrote:
> > I replaced the front pads tonight and started to look at the rear shoes. > What's the easiest way to remove them? I was reading the online manual for > a 1995-1997 Civic but the pics for the '97 are a little different than the > 2000. There's a copy of the Civic 2002-03 manual listed at http://icelord.net/honda/repair/. It may offer more assistance than the earlier manual. > Also how hard is it to replace the components for the rear wheel > cylinder? Seems simple enough. The rear wheel cylinders are fairly straight forward to replace. However, if they're not leaking or show signs of corrosion when you look under the boots, then you can reuse them (be careful not to get brake dust under the boots). If you do replace them, just make sure that you use a flare nut wrench on the brake line fitting. Eric |
Re: How to remove brake shoes -- 2000 Civic
On Wed, 02 Jun 2004 14:13:20 -0700, Eric wrote:
> mike urig wrote: >> >> I replaced the front pads tonight and started to look at the rear shoes. >> What's the easiest way to remove them? I was reading the online manual for >> a 1995-1997 Civic but the pics for the '97 are a little different than the >> 2000. > > There's a copy of the Civic 2002-03 manual listed at > http://icelord.net/honda/repair/. It may offer more assistance than the > earlier manual. > >> Also how hard is it to replace the components for the rear wheel >> cylinder? Seems simple enough. > > The rear wheel cylinders are fairly straight forward to replace. However, > if they're not leaking or show signs of corrosion when you look under the > boots, then you can reuse them (be careful not to get brake dust under the > boots). If you do replace them, just make sure that you use a flare nut > wrench on the brake line fitting. > > Eric Thanks Eric ! Mike |
Re: How to remove brake shoes -- 2000 Civic
On Wed, 02 Jun 2004 14:13:20 -0700, Eric wrote:
> mike urig wrote: >> >> I replaced the front pads tonight and started to look at the rear shoes. >> What's the easiest way to remove them? I was reading the online manual for >> a 1995-1997 Civic but the pics for the '97 are a little different than the >> 2000. > > There's a copy of the Civic 2002-03 manual listed at > http://icelord.net/honda/repair/. It may offer more assistance than the > earlier manual. > >> Also how hard is it to replace the components for the rear wheel >> cylinder? Seems simple enough. > > The rear wheel cylinders are fairly straight forward to replace. However, > if they're not leaking or show signs of corrosion when you look under the > boots, then you can reuse them (be careful not to get brake dust under the > boots). If you do replace them, just make sure that you use a flare nut > wrench on the brake line fitting. > > Eric I went to the link above and downloaded one of the files, it says I need to enter a password to view it. I also downloaded another file but that one is for the '95-97 models. Mike |
Re: How to remove brake shoes -- 2000 Civic
mike urig wrote: > > On Wed, 02 Jun 2004 14:13:20 -0700, Eric wrote: > > > There's a copy of the Civic 2002-03 manual listed at > > http://icelord.net/honda/repair/. It may offer more assistance than the > > earlier manual. > > > >> Also how hard is it to replace the components for the rear wheel > >> cylinder? Seems simple enough. > > > > The rear wheel cylinders are fairly straight forward to replace. > > However, if they're not leaking or show signs of corrosion when you > > look under the boots, then you can reuse them (be careful not to get > > brake dust under the boots). If you do replace them, just make sure > > that you use a flare nut wrench on the brake line fitting. > > > > Eric > > I went to the link above and downloaded one of the files, it says I need > to enter a password to view it. I also downloaded another file but that > one is for the '95-97 models. > The password for the ftp site is given on the page. I just checked it and it's the same as it's been for a little while, i.e., honda4you. Eric |
Re: How to remove brake shoes -- 2000 Civic
On Sat, 05 Jun 2004 00:16:50 -0700, Eric wrote:
> > > mike urig wrote: >> >> On Wed, 02 Jun 2004 14:13:20 -0700, Eric wrote: >> >> > There's a copy of the Civic 2002-03 manual listed at >> > http://icelord.net/honda/repair/. It may offer more assistance than the >> > earlier manual. >> > >> >> Also how hard is it to replace the components for the rear wheel >> >> cylinder? Seems simple enough. >> > >> > The rear wheel cylinders are fairly straight forward to replace. >> > However, if they're not leaking or show signs of corrosion when you >> > look under the boots, then you can reuse them (be careful not to get >> > brake dust under the boots). If you do replace them, just make sure >> > that you use a flare nut wrench on the brake line fitting. >> > >> > Eric >> >> I went to the link above and downloaded one of the files, it says I need >> to enter a password to view it. I also downloaded another file but that >> one is for the '95-97 models. >> > > The password for the ftp site is given on the page. I just checked it and > it's the same as it's been for a little while, i.e., honda4you. > > Eric I should have been clearer, the document itself is asking for a password when I try to read it. Mike |
Re: How to remove brake shoes -- 2000 Civic
I did a brake job on a '92 Accord last year, I had no problem taking
everything apart, it was assembling the shoes on to the mounting that was the problem. I tried to do it like I have done on GM and Fords. For the Honda, I had to assemble the parts on a bench vice and then move the assembled parts to the car. On Sat, 05 Jun 2004 00:16:50 -0700, Eric <say.no@spam.now> wrote: > > >mike urig wrote: >> >> On Wed, 02 Jun 2004 14:13:20 -0700, Eric wrote: >> >> > There's a copy of the Civic 2002-03 manual listed at >> > http://icelord.net/honda/repair/. It may offer more assistance than the >> > earlier manual. >> > >> >> Also how hard is it to replace the components for the rear wheel >> >> cylinder? Seems simple enough. >> > >> > The rear wheel cylinders are fairly straight forward to replace. >> > However, if they're not leaking or show signs of corrosion when you >> > look under the boots, then you can reuse them (be careful not to get >> > brake dust under the boots). If you do replace them, just make sure >> > that you use a flare nut wrench on the brake line fitting. >> > >> > Eric >> >> I went to the link above and downloaded one of the files, it says I need >> to enter a password to view it. I also downloaded another file but that >> one is for the '95-97 models. >> > >The password for the ftp site is given on the page. I just checked it and >it's the same as it's been for a little while, i.e., honda4you. > >Eric |
Re: How to remove brake shoes -- 2000 Civic
On Sat, 05 Jun 2004 19:20:54 -0700, Charlie S wrote:
> I did a brake job on a '92 Accord last year, I had no problem taking > everything apart, it was assembling the shoes on to the mounting that > was the problem. I tried to do it like I have done on GM and Fords. > For the Honda, I had to assemble the parts on a bench vice and then > move the assembled parts to the car. > > On Sat, 05 Jun 2004 00:16:50 -0700, Eric <say.no@spam.now> wrote: > >> >> >>mike urig wrote: >>> >>> On Wed, 02 Jun 2004 14:13:20 -0700, Eric wrote: >>> >>> > There's a copy of the Civic 2002-03 manual listed at >>> > http://icelord.net/honda/repair/. It may offer more assistance than the >>> > earlier manual. >>> > >>> >> Also how hard is it to replace the components for the rear wheel >>> >> cylinder? Seems simple enough. >>> > >>> > The rear wheel cylinders are fairly straight forward to replace. >>> > However, if they're not leaking or show signs of corrosion when you >>> > look under the boots, then you can reuse them (be careful not to get >>> > brake dust under the boots). If you do replace them, just make sure >>> > that you use a flare nut wrench on the brake line fitting. >>> > >>> > Eric >>> >>> I went to the link above and downloaded one of the files, it says I need >>> to enter a password to view it. I also downloaded another file but that >>> one is for the '95-97 models. >>> >> >>The password for the ftp site is given on the page. I just checked it and >>it's the same as it's been for a little while, i.e., honda4you. >> >>Eric I did the front discs and had our mechanic at work do the rear for me. Thanks for all the replies. Mike |
Re: How to remove brake shoes -- 2000 Civic
mike urig wrote:
> > I should have been clearer, the document itself is asking for a password > when I try to read it. I haven't run into this problem yet with those files. Which file was it that required the password? Eric |
Re: How to remove brake shoes -- 2000 Civic
On Sun, 06 Jun 2004 01:34:34 -0700, Eric wrote:
> mike urig wrote: >> >> I should have been clearer, the document itself is asking for a password >> when I try to read it. > > I haven't run into this problem yet with those files. Which file was it > that required the password? > > Eric It was the '96-'00 year file but everything works now. Mike |
All times are GMT -4. The time now is 01:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands