|
Re: Jumping idle, IAC valve
In article <bvl8a4$pvr$1@news.surfnet.nl>,
"JanN" <JanN.DelDit@helemaal.niets.com> wrote: > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > idle jumps up and down. It seems to almost stall, the idle air control > reacts, and the idle shoots up, too high. It again falls down to almost > stalling. This continues to repeat. > So I took the Idle Air Control (IAC) from the intake manifold. The metal > screen was for the larger part blocked with black soot. Cleaned this. > This did not complete solve the problem. I think also the electrical motor > is sticky. Can anyone on the list give me some hints on how to get this > smooth? > How can I remove this motor from the IAC assembly?? > Should I spray WD40 at the IAC valve, or will this ruin things? > > Thanks, Jan > 1991 Accord Aerodeck (=wagon) 2.2i EX > > Don't use WD-40. It causes rubber to swell. Use carb cleaner or throttle body cleaner on the valve while the car is running. You want the solvent sucked out as quickly as possible so it doesn't damage the valve or deposit soot farther down into it. Also check: thermostat, EGR valve, and PCV valve |
Re: Jumping idle, IAC valve
In article <bvl8a4$pvr$1@news.surfnet.nl>,
"JanN" <JanN.DelDit@helemaal.niets.com> wrote: > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > idle jumps up and down. It seems to almost stall, the idle air control > reacts, and the idle shoots up, too high. It again falls down to almost > stalling. This continues to repeat. > So I took the Idle Air Control (IAC) from the intake manifold. The metal > screen was for the larger part blocked with black soot. Cleaned this. > This did not complete solve the problem. I think also the electrical motor > is sticky. Can anyone on the list give me some hints on how to get this > smooth? > How can I remove this motor from the IAC assembly?? > Should I spray WD40 at the IAC valve, or will this ruin things? > > Thanks, Jan > 1991 Accord Aerodeck (=wagon) 2.2i EX > > Don't use WD-40. It causes rubber to swell. Use carb cleaner or throttle body cleaner on the valve while the car is running. You want the solvent sucked out as quickly as possible so it doesn't damage the valve or deposit soot farther down into it. Also check: thermostat, EGR valve, and PCV valve |
Re: Jumping idle, IAC valve
I'd check your Fast Idle valve.
"JanN" <JanN.DelDit@helemaal.niets.com> wrote in message news:bvl8a4$pvr$1@news.surfnet.nl... > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > idle jumps up and down. It seems to almost stall, the idle air control > reacts, and the idle shoots up, too high. It again falls down to almost > stalling. This continues to repeat. > So I took the Idle Air Control (IAC) from the intake manifold. The metal > screen was for the larger part blocked with black soot. Cleaned this. > This did not complete solve the problem. I think also the electrical motor > is sticky. Can anyone on the list give me some hints on how to get this > smooth? > How can I remove this motor from the IAC assembly?? > Should I spray WD40 at the IAC valve, or will this ruin things? > > Thanks, Jan > 1991 Accord Aerodeck (=wagon) 2.2i EX > > |
Re: Jumping idle, IAC valve
I'd check your Fast Idle valve.
"JanN" <JanN.DelDit@helemaal.niets.com> wrote in message news:bvl8a4$pvr$1@news.surfnet.nl... > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > idle jumps up and down. It seems to almost stall, the idle air control > reacts, and the idle shoots up, too high. It again falls down to almost > stalling. This continues to repeat. > So I took the Idle Air Control (IAC) from the intake manifold. The metal > screen was for the larger part blocked with black soot. Cleaned this. > This did not complete solve the problem. I think also the electrical motor > is sticky. Can anyone on the list give me some hints on how to get this > smooth? > How can I remove this motor from the IAC assembly?? > Should I spray WD40 at the IAC valve, or will this ruin things? > > Thanks, Jan > 1991 Accord Aerodeck (=wagon) 2.2i EX > > |
Re: Jumping idle, IAC valve
I'd check your Fast Idle valve.
"JanN" <JanN.DelDit@helemaal.niets.com> wrote in message news:bvl8a4$pvr$1@news.surfnet.nl... > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > idle jumps up and down. It seems to almost stall, the idle air control > reacts, and the idle shoots up, too high. It again falls down to almost > stalling. This continues to repeat. > So I took the Idle Air Control (IAC) from the intake manifold. The metal > screen was for the larger part blocked with black soot. Cleaned this. > This did not complete solve the problem. I think also the electrical motor > is sticky. Can anyone on the list give me some hints on how to get this > smooth? > How can I remove this motor from the IAC assembly?? > Should I spray WD40 at the IAC valve, or will this ruin things? > > Thanks, Jan > 1991 Accord Aerodeck (=wagon) 2.2i EX > > |
Re: Jumping idle, IAC valve
I'd check your Fast Idle valve.
"JanN" <JanN.DelDit@helemaal.niets.com> wrote in message news:bvl8a4$pvr$1@news.surfnet.nl... > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > idle jumps up and down. It seems to almost stall, the idle air control > reacts, and the idle shoots up, too high. It again falls down to almost > stalling. This continues to repeat. > So I took the Idle Air Control (IAC) from the intake manifold. The metal > screen was for the larger part blocked with black soot. Cleaned this. > This did not complete solve the problem. I think also the electrical motor > is sticky. Can anyone on the list give me some hints on how to get this > smooth? > How can I remove this motor from the IAC assembly?? > Should I spray WD40 at the IAC valve, or will this ruin things? > > Thanks, Jan > 1991 Accord Aerodeck (=wagon) 2.2i EX > > |
Re: Jumping idle, IAC valve
"Kevin McMurtrie" <mcmurtri@dslextreme.com> wrote in message
news:mcmurtri-C74A77.01242203022004@corp-radius.supernews.com... > In article <bvl8a4$pvr$1@news.surfnet.nl>, > "JanN" <JanN.DelDit@helemaal.niets.com> wrote: > > > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > > idle jumps up and down. It seems to almost stall, the idle air control > > reacts, and the idle shoots up, too high. It again falls down to almost > > stalling. This continues to repeat. > > So I took the Idle Air Control (IAC) from the intake manifold. The metal > > screen was for the larger part blocked with black soot. Cleaned this. > > This did not complete solve the problem. I think also the electrical motor > > is sticky. Can anyone on the list give me some hints on how to get this > > smooth? > > How can I remove this motor from the IAC assembly?? > > Should I spray WD40 at the IAC valve, or will this ruin things? > > > > Thanks, Jan > > 1991 Accord Aerodeck (=wagon) 2.2i EX > > > > > > Don't use WD-40. It causes rubber to swell. > > Use carb cleaner or throttle body cleaner on the valve while the car is > running. You want the solvent sucked out as quickly as possible so it > doesn't damage the valve or deposit soot farther down into it. > > Also check: thermostat, EGR valve, and PCV valve Just Wed. of this week, my favorite import car mechanic "cleaned the PCV valve and adjusted the idling" on my '89 Civic that had the exact same type of problem. The vehicle now idles perfectly normal. He also mentioned the following other things that can lead to this type of problem: -Faulty fast idle valve -Bad distributor that "can throw the timing off" -Faulty IAC valve -Faulty PCV valve -Improper idle adjustment J. Perry |
Re: Jumping idle, IAC valve
"Kevin McMurtrie" <mcmurtri@dslextreme.com> wrote in message
news:mcmurtri-C74A77.01242203022004@corp-radius.supernews.com... > In article <bvl8a4$pvr$1@news.surfnet.nl>, > "JanN" <JanN.DelDit@helemaal.niets.com> wrote: > > > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > > idle jumps up and down. It seems to almost stall, the idle air control > > reacts, and the idle shoots up, too high. It again falls down to almost > > stalling. This continues to repeat. > > So I took the Idle Air Control (IAC) from the intake manifold. The metal > > screen was for the larger part blocked with black soot. Cleaned this. > > This did not complete solve the problem. I think also the electrical motor > > is sticky. Can anyone on the list give me some hints on how to get this > > smooth? > > How can I remove this motor from the IAC assembly?? > > Should I spray WD40 at the IAC valve, or will this ruin things? > > > > Thanks, Jan > > 1991 Accord Aerodeck (=wagon) 2.2i EX > > > > > > Don't use WD-40. It causes rubber to swell. > > Use carb cleaner or throttle body cleaner on the valve while the car is > running. You want the solvent sucked out as quickly as possible so it > doesn't damage the valve or deposit soot farther down into it. > > Also check: thermostat, EGR valve, and PCV valve Just Wed. of this week, my favorite import car mechanic "cleaned the PCV valve and adjusted the idling" on my '89 Civic that had the exact same type of problem. The vehicle now idles perfectly normal. He also mentioned the following other things that can lead to this type of problem: -Faulty fast idle valve -Bad distributor that "can throw the timing off" -Faulty IAC valve -Faulty PCV valve -Improper idle adjustment J. Perry |
Re: Jumping idle, IAC valve
"Kevin McMurtrie" <mcmurtri@dslextreme.com> wrote in message
news:mcmurtri-C74A77.01242203022004@corp-radius.supernews.com... > In article <bvl8a4$pvr$1@news.surfnet.nl>, > "JanN" <JanN.DelDit@helemaal.niets.com> wrote: > > > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > > idle jumps up and down. It seems to almost stall, the idle air control > > reacts, and the idle shoots up, too high. It again falls down to almost > > stalling. This continues to repeat. > > So I took the Idle Air Control (IAC) from the intake manifold. The metal > > screen was for the larger part blocked with black soot. Cleaned this. > > This did not complete solve the problem. I think also the electrical motor > > is sticky. Can anyone on the list give me some hints on how to get this > > smooth? > > How can I remove this motor from the IAC assembly?? > > Should I spray WD40 at the IAC valve, or will this ruin things? > > > > Thanks, Jan > > 1991 Accord Aerodeck (=wagon) 2.2i EX > > > > > > Don't use WD-40. It causes rubber to swell. > > Use carb cleaner or throttle body cleaner on the valve while the car is > running. You want the solvent sucked out as quickly as possible so it > doesn't damage the valve or deposit soot farther down into it. > > Also check: thermostat, EGR valve, and PCV valve Just Wed. of this week, my favorite import car mechanic "cleaned the PCV valve and adjusted the idling" on my '89 Civic that had the exact same type of problem. The vehicle now idles perfectly normal. He also mentioned the following other things that can lead to this type of problem: -Faulty fast idle valve -Bad distributor that "can throw the timing off" -Faulty IAC valve -Faulty PCV valve -Improper idle adjustment J. Perry |
Re: Jumping idle, IAC valve
"Kevin McMurtrie" <mcmurtri@dslextreme.com> wrote in message
news:mcmurtri-C74A77.01242203022004@corp-radius.supernews.com... > In article <bvl8a4$pvr$1@news.surfnet.nl>, > "JanN" <JanN.DelDit@helemaal.niets.com> wrote: > > > The problem is that after the engine (1991 Accord 2.2) is fully warm, the > > idle jumps up and down. It seems to almost stall, the idle air control > > reacts, and the idle shoots up, too high. It again falls down to almost > > stalling. This continues to repeat. > > So I took the Idle Air Control (IAC) from the intake manifold. The metal > > screen was for the larger part blocked with black soot. Cleaned this. > > This did not complete solve the problem. I think also the electrical motor > > is sticky. Can anyone on the list give me some hints on how to get this > > smooth? > > How can I remove this motor from the IAC assembly?? > > Should I spray WD40 at the IAC valve, or will this ruin things? > > > > Thanks, Jan > > 1991 Accord Aerodeck (=wagon) 2.2i EX > > > > > > Don't use WD-40. It causes rubber to swell. > > Use carb cleaner or throttle body cleaner on the valve while the car is > running. You want the solvent sucked out as quickly as possible so it > doesn't damage the valve or deposit soot farther down into it. > > Also check: thermostat, EGR valve, and PCV valve Just Wed. of this week, my favorite import car mechanic "cleaned the PCV valve and adjusted the idling" on my '89 Civic that had the exact same type of problem. The vehicle now idles perfectly normal. He also mentioned the following other things that can lead to this type of problem: -Faulty fast idle valve -Bad distributor that "can throw the timing off" -Faulty IAC valve -Faulty PCV valve -Improper idle adjustment J. Perry |
| All times are GMT -4. The time now is 02:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands