chipme

I do not know how to disassemble the door.

TeGGeR®

"chipme" <rorybowen@nospam.hotmail.com> wrote in
news:ef1f1a87995e45ed8bdc4bbca24748a7@localhost.ta lkaboutautos.com:

> I do not know how to disassemble the door.
>
>


How far have you got so far?

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

TeGGeR®

"chipme" <rorybowen@nospam.hotmail.com> wrote in
news:ef1f1a87995e45ed8bdc4bbca24748a7@localhost.ta lkaboutautos.com:

> I do not know how to disassemble the door.
>
>


How far have you got so far?

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

N.E.Ohio Bob

chipme wrote:
> I do not know how to disassemble the door.
>
Inside handle is different on the two door from that of thr four door.
Be sure you have the correct one.
Inner trim is held in place with screws and push-in fasteners. There
are two small screws hidden behind small plastic circles in the inner
handle plastic housing. The little circle is hinged on one side.
Carfully pry it open with a small screwdriver, and remove the small
screws. You can disconect the handle from the latch rot at the clip .
There is a larger screw in the arm rest hand pull,under a square cover.
There are also two or three screws onder nickle sized covers (that pry
off) around the outer edge of the trim.
The bottom of the trim just pulls loose across the bottom. There are
plastic push fasteners there.
Inner trim should lift up and off the top inner edge of the door frame.
bob

N.E.Ohio Bob

chipme wrote:
> I do not know how to disassemble the door.
>
Inside handle is different on the two door from that of thr four door.
Be sure you have the correct one.
Inner trim is held in place with screws and push-in fasteners. There
are two small screws hidden behind small plastic circles in the inner
handle plastic housing. The little circle is hinged on one side.
Carfully pry it open with a small screwdriver, and remove the small
screws. You can disconect the handle from the latch rot at the clip .
There is a larger screw in the arm rest hand pull,under a square cover.
There are also two or three screws onder nickle sized covers (that pry
off) around the outer edge of the trim.
The bottom of the trim just pulls loose across the bottom. There are
plastic push fasteners there.
Inner trim should lift up and off the top inner edge of the door frame.
bob

chipme

I have taken out the only screws that I can find on the door.

chipme

I have taken out the only screws that I can find on the door.

chipme

Thanks for your help Bob

chipme

Thanks for your help Bob

mopa

did it work chipme?

If not, i can help. I have taken my car apart so many times, it's not
funny. :O)

I just enjoy seeing how things work... ;d

mopa

did it work chipme?

If not, i can help. I have taken my car apart so many times, it's not
funny. :O)

I just enjoy seeing how things work... ;d