Panasonic EY7460LN2S 21.6-Volt Li-ion Drill/Driver Kit
 

Price:$377.00
Image: http://ultradiscountfinder.info/image.php?id=B001HX36GE
Best deal: http://ultradiscountfinder.info/index.php?id=B001HX36GE







This high-quality tool is ideal for general construction, plumbing, electric installation work, deck building and finish carpentry. Low speed of 100-400 rpm is ideal for tough jobs requiring high torque like drilling holes and driving large diameter screws. A high speed of 350-1500 rpm is great for drilling and fastening in metal. The EY7460LN2S features a new all metal gear system. The use of metal gears for switching between high and low speed operation reduces part wear and offers superior durability compared to plastic gears, decreasing the frequency of tool repair. The fan cooled ventilated motor is design to keep the motor temperature low which makes the tool well suited for heavy duty use and repetitive tasks. The EY7460LN2S is equipped with an 18-stage clutch plus drill position. The clutch torque starts at 8.8 in. lbs. and goes to 61.0 in. lbs. in 3.0 in. lbs. increments over the 18 stages. The tool has a -inch, heavy-duty keyless chuck, variable speed control, 2-speed gear box, electric brake and quick-charging system. The GuardION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life. The EY7460LN2S uses a self diagnostic universal battery charger which electronically monitors the condition of each battery cell in the battery pack during the charging process to deliver full charging with minimal heat generation. The charger will charge all Panasonic battery chemistries - Ni-Cd, Ni-MH, Li-ion and all voltages from 7.2-28.8v. The 3.0ah Li-ion battery pack included in the kit fully charges in 60 minutes. The kit comes with a tool, 2-3.0ah Li-ion battery packs, a universal charger, and a molded case.