Pilot (03) Homelink Programming
07-09-2005, 03:12 PM
#1
Guest
Posts: n/a
Pilot (03) Homelink Programming
We just has our garage door openor replaced with a Chamberlain Liftmaster.
Following the instructions in the manual for openers with a "rolling" code I
have tried without any success to program the Homelink for the opener. I
had similar problems with our previous opener -- a Genie -- but I suceeded
although I don't know what lucky combination I hit. I have cleared out the
previous codes as instucted and tried press the homelink button while the
learn light is on anywhere from 1 - 10 secs -- no luck after two hours. Any
suggestions anyone?
Following the instructions in the manual for openers with a "rolling" code I
have tried without any success to program the Homelink for the opener. I
had similar problems with our previous opener -- a Genie -- but I suceeded
although I don't know what lucky combination I hit. I have cleared out the
previous codes as instucted and tried press the homelink button while the
learn light is on anywhere from 1 - 10 secs -- no luck after two hours. Any
suggestions anyone?
07-09-2005, 04:36 PM
#2
Guest
Posts: n/a
Re: Pilot (03) Homelink Programming
First you need to program the visor transmitter from the new opener
transmitter by following the directions from Homelink at
http://www.homelink.com/training/train.taf . Then you program the visor
transmitter to the opener using the rolling code directions.
Doordoc
www.DoorsAndOpeners.com
transmitter by following the directions from Homelink at
http://www.homelink.com/training/train.taf . Then you program the visor
transmitter to the opener using the rolling code directions.
Doordoc
www.DoorsAndOpeners.com
07-09-2005, 04:36 PM
#3
Guest
Posts: n/a
Re: Pilot (03) Homelink Programming
First you need to program the visor transmitter from the new opener
transmitter by following the directions from Homelink at
http://www.homelink.com/training/train.taf . Then you program the visor
transmitter to the opener using the rolling code directions.
Doordoc
www.DoorsAndOpeners.com
transmitter by following the directions from Homelink at
http://www.homelink.com/training/train.taf . Then you program the visor
transmitter to the opener using the rolling code directions.
Doordoc
www.DoorsAndOpeners.com
07-10-2005, 02:40 PM
#4
Guest
Posts: n/a
Re: Pilot (03) Homelink Programming
<doordoc@prodigy.net> wrote in message
news:1120941370.546893.161280@g44g2000cwa.googlegr oups.com...
> First you need to program the visor transmitter from the new opener
> transmitter by following the directions from Homelink at
> http://www.homelink.com/training/train.taf . Then you program the visor
> transmitter to the opener using the rolling code directions.
>
> Doordoc
> www.DoorsAndOpeners.com
>
Directions from Homelink site solved the problem. The manual leaves a step
out. Thanks.
07-10-2005, 02:40 PM
#5
Guest
Posts: n/a
Re: Pilot (03) Homelink Programming
<doordoc@prodigy.net> wrote in message
news:1120941370.546893.161280@g44g2000cwa.googlegr oups.com...
> First you need to program the visor transmitter from the new opener
> transmitter by following the directions from Homelink at
> http://www.homelink.com/training/train.taf . Then you program the visor
> transmitter to the opener using the rolling code directions.
>
> Doordoc
> www.DoorsAndOpeners.com
>
Directions from Homelink site solved the problem. The manual leaves a step
out. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
bobm3@worthless.info
Hyundai Mailing List
3
02-16-2008 12:41 PM
kreece02
Honda Accord
0
06-05-2007 11:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)