|
Re: PO135 error code
I removed shield from exhaust manifold and found hairline crack. I put
JB weld epoxy on it. It is sitting overnight now. Will post results. Thank you. TeGGeR® wrote: > "wp51dos" <wp51dos@yahoo.com> wrote in news:1163550116.290594.172210 > @h48g2000cwc.googlegroups.com: > > > > > > > > P0135 error code > > > > Thank you for reply. > > > > Car just passed california smog 2 months ago. > > > > I tried resetting the error code with all the things you said on > > TeGGeR. Won't go out. > > > > How'd you try to reset it? By disconnecting the battery? > > When the light came back on again, was it the same code? There are > literally 100 possible codes, so don't just assume it's the same one. > > > > > > > Other ways to reset ? > > > > If the battery-unplug didn't work, and the light keeps coming back on > with the same code, then the heater is truly bad and the sensor must be > replaced. > > The only other way to reset is with the OBD-II scan tool. > > > > > > Car running fine. I will check gas milage. > > > > Won't tell you a thing. Will have no noticeable effect on mileage. > > > > > > > Called Honda america. They say not covered period. > > > > > > > It was covered as part of the new-car warranty, which is obviously long > expired. > > > > -- > TeGGeR® > > The Unofficial Honda/Acura FAQ > www.tegger.com/hondafaq/ |
Re: PO135 error code
wp51dos wrote:
> I removed shield from exhaust manifold and found hairline crack. I put > JB weld epoxy on it. It is sitting overnight now. Will post results. > Thank you. carry a fire extinguisher because at exhaust temps, epoxy burns. unfortunately, cracked manifolds can't be economically repaired, so you need to get a replacement from a junk yard [if you can - i believe catalyst containing manifolds like your would be illegal to re-sell in california] or buy new. > > > TeGGeR� wrote: >> "wp51dos" <wp51dos@yahoo.com> wrote in news:1163550116.290594.172210 >> @h48g2000cwc.googlegroups.com: >> >> >>> >>> P0135 error code >>> >>> Thank you for reply. >>> >>> Car just passed california smog 2 months ago. >>> >>> I tried resetting the error code with all the things you said on >>> TeGGeR. Won't go out. >> >> >> How'd you try to reset it? By disconnecting the battery? >> >> When the light came back on again, was it the same code? There are >> literally 100 possible codes, so don't just assume it's the same one. >> >> >> >>> Other ways to reset ? >> >> >> If the battery-unplug didn't work, and the light keeps coming back on >> with the same code, then the heater is truly bad and the sensor must be >> replaced. >> >> The only other way to reset is with the OBD-II scan tool. >> >> >>> Car running fine. I will check gas milage. >> >> >> Won't tell you a thing. Will have no noticeable effect on mileage. >> >> >> >>> Called Honda america. They say not covered period. >>> >>> >> >> It was covered as part of the new-car warranty, which is obviously long >> expired. >> >> >> >> -- >> TeGGeR� >> >> The Unofficial Honda/Acura FAQ >> www.tegger.com/hondafaq/ > |
Re: PO135 error code
wp51dos wrote:
> I removed shield from exhaust manifold and found hairline crack. I put > JB weld epoxy on it. It is sitting overnight now. Will post results. > Thank you. carry a fire extinguisher because at exhaust temps, epoxy burns. unfortunately, cracked manifolds can't be economically repaired, so you need to get a replacement from a junk yard [if you can - i believe catalyst containing manifolds like your would be illegal to re-sell in california] or buy new. > > > TeGGeR� wrote: >> "wp51dos" <wp51dos@yahoo.com> wrote in news:1163550116.290594.172210 >> @h48g2000cwc.googlegroups.com: >> >> >>> >>> P0135 error code >>> >>> Thank you for reply. >>> >>> Car just passed california smog 2 months ago. >>> >>> I tried resetting the error code with all the things you said on >>> TeGGeR. Won't go out. >> >> >> How'd you try to reset it? By disconnecting the battery? >> >> When the light came back on again, was it the same code? There are >> literally 100 possible codes, so don't just assume it's the same one. >> >> >> >>> Other ways to reset ? >> >> >> If the battery-unplug didn't work, and the light keeps coming back on >> with the same code, then the heater is truly bad and the sensor must be >> replaced. >> >> The only other way to reset is with the OBD-II scan tool. >> >> >>> Car running fine. I will check gas milage. >> >> >> Won't tell you a thing. Will have no noticeable effect on mileage. >> >> >> >>> Called Honda america. They say not covered period. >>> >>> >> >> It was covered as part of the new-car warranty, which is obviously long >> expired. >> >> >> >> -- >> TeGGeR� >> >> The Unofficial Honda/Acura FAQ >> www.tegger.com/hondafaq/ > |
Re: PO135 error code
wp51dos wrote:
> I removed shield from exhaust manifold and found hairline crack. I put > JB weld epoxy on it. It is sitting overnight now. Will post results. > Thank you. carry a fire extinguisher because at exhaust temps, epoxy burns. unfortunately, cracked manifolds can't be economically repaired, so you need to get a replacement from a junk yard [if you can - i believe catalyst containing manifolds like your would be illegal to re-sell in california] or buy new. > > > TeGGeR� wrote: >> "wp51dos" <wp51dos@yahoo.com> wrote in news:1163550116.290594.172210 >> @h48g2000cwc.googlegroups.com: >> >> >>> >>> P0135 error code >>> >>> Thank you for reply. >>> >>> Car just passed california smog 2 months ago. >>> >>> I tried resetting the error code with all the things you said on >>> TeGGeR. Won't go out. >> >> >> How'd you try to reset it? By disconnecting the battery? >> >> When the light came back on again, was it the same code? There are >> literally 100 possible codes, so don't just assume it's the same one. >> >> >> >>> Other ways to reset ? >> >> >> If the battery-unplug didn't work, and the light keeps coming back on >> with the same code, then the heater is truly bad and the sensor must be >> replaced. >> >> The only other way to reset is with the OBD-II scan tool. >> >> >>> Car running fine. I will check gas milage. >> >> >> Won't tell you a thing. Will have no noticeable effect on mileage. >> >> >> >>> Called Honda america. They say not covered period. >>> >>> >> >> It was covered as part of the new-car warranty, which is obviously long >> expired. >> >> >> >> -- >> TeGGeR� >> >> The Unofficial Honda/Acura FAQ >> www.tegger.com/hondafaq/ > |
Re: PO135 error code
The JB epoxy disintegrated to powder easily scraped off with screwdriver. Replaced it with manifold patch cement from autozone. Replaced O2 sensor. Sevice light off. Thanks for the help. |
Re: PO135 error code
The JB epoxy disintegrated to powder easily scraped off with screwdriver. Replaced it with manifold patch cement from autozone. Replaced O2 sensor. Sevice light off. Thanks for the help. |
Re: PO135 error code
The JB epoxy disintegrated to powder easily scraped off with screwdriver. Replaced it with manifold patch cement from autozone. Replaced O2 sensor. Sevice light off. Thanks for the help. |
| All times are GMT -4. The time now is 07:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands