Q for Tegger re: parking brake on '02 Accord
The parking brake on my 02 Accord will not always release fully. The cable
is loose, and I narrowed it down to the left rear. I can go under the left rear and manually (with the jack handle) spring it loose. It seems there is an excessive buildup of crap in the coiled spring that retracts the little lever when the cable tension is released. One time the RR disc and wheel were really really hot - almost smoking. I'm not using the parking brake now, but it's a 5sp manual, so I would like to address it. Anything I can do more than cleaning off the "retaining" spring and making sure it's lubed? a |
Re: Q for Tegger re: parking brake on '02 Accord
a wrote:
> The parking brake on my 02 Accord will not always release fully. The cable > is loose, and I narrowed it down to the left rear. I can go under the left > rear and manually (with the jack handle) spring it loose. It seems there > is an excessive buildup of crap in the coiled spring that retracts the > little lever when the cable tension is released. One time the RR disc ... Ooops - that should read "LR disc"... a |
Re: Q for Tegger re: parking brake on '02 Accord
a wrote:
> The parking brake on my 02 Accord will not always release fully. The cable > is loose, and I narrowed it down to the left rear. I can go under the left > rear and manually (with the jack handle) spring it loose. It seems there > is an excessive buildup of crap in the coiled spring that retracts the > little lever when the cable tension is released. One time the RR disc and > wheel were really really hot - almost smoking. I'm not using the parking > brake now, but it's a 5sp manual, so I would like to address it. > > Anything I can do more than cleaning off the "retaining" spring and making > sure it's lubed? > > a http://img41.imageshack.us/img41/4928/bugger.gif |
Re: Q for Tegger re: parking brake on '02 Accord
a <a@thisisnotmyrealemail.com> wrote in
news:9fwlm.42806$PH1.40091@edtnps82: > a wrote: >> The parking brake on my 02 Accord will not always release fully. The >> cable is loose, and I narrowed it down to the left rear. I can go >> under the left rear and manually (with the jack handle) spring it >> loose. It seems there is an excessive buildup of crap in the coiled >> spring that retracts the little lever when the cable tension is >> released. One time the RR disc and wheel were really really hot - >> almost smoking. I'm not using the parking brake now, but it's a 5sp >> manual, so I would like to address it. >> >> Anything I can do more than cleaning off the "retaining" spring and >> making sure it's lubed? >> >> a > > http://img41.imageshack.us/img41/4928/bugger.gif Whoo. I don't have a microscope powerful enough to see those clearly. If it's really the parking brake lever at the caliper that won't return to its proper position, then the shaft seal has failed and corrosion has occured on the shaft under the seal, inside the caliper. However... Are you sure it's not the cable's clevis pin that's seized, keeping the clevis cocked on an angle? This is extremely common. Are you sure it's not the piston seized in its bore? This is common as well, especially if the brake fluid is not changed every two years or you live in an area where salt is used on the roads. Those last two are FAR more likely on an '02 than a seized parking brake shaft. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
All times are GMT -4. The time now is 10:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands