radio dissconnect 2000 accord
09-04-2003, 10:21 AM
#2
Guest
Posts: n/a
Re: radio dissconnect 2000 accord
http://www.installdoctor.com/Install...PDF/466053.pdf
This tells how to do it
Good luck
Greg
"rkamp" <gt3ked@yahoo.com> wrote in message
news:Xns93EBEFF0FA4CAgt3kedyahoocom@130.81.64.196. ..
> Anyone know how to disconnet the bolt/clip holding the clock to the dash
on
> a 2000 accord.Any help/suggestions would be great.Thanks.
This tells how to do it
Good luck
Greg
"rkamp" <gt3ked@yahoo.com> wrote in message
news:Xns93EBEFF0FA4CAgt3kedyahoocom@130.81.64.196. ..
> Anyone know how to disconnet the bolt/clip holding the clock to the dash
on
> a 2000 accord.Any help/suggestions would be great.Thanks.
09-04-2003, 10:21 AM
#3
Guest
Posts: n/a
Re: radio dissconnect 2000 accord
http://www.installdoctor.com/Install...PDF/466053.pdf
This tells how to do it
Good luck
Greg
"rkamp" <gt3ked@yahoo.com> wrote in message
news:Xns93EBEFF0FA4CAgt3kedyahoocom@130.81.64.196. ..
> Anyone know how to disconnet the bolt/clip holding the clock to the dash
on
> a 2000 accord.Any help/suggestions would be great.Thanks.
This tells how to do it
Good luck
Greg
"rkamp" <gt3ked@yahoo.com> wrote in message
news:Xns93EBEFF0FA4CAgt3kedyahoocom@130.81.64.196. ..
> Anyone know how to disconnet the bolt/clip holding the clock to the dash
on
> a 2000 accord.Any help/suggestions would be great.Thanks.
09-04-2003, 10:27 AM
#4
Guest
Posts: n/a
Re: radio dissconnect 2000 accord
In article <Xns93EBEFF0FA4CAgt3kedyahoocom@130.81.64.196>,
rkamp <gt3ked@yahoo.com> wrote:
> Anyone know how to disconnet the bolt/clip holding the clock to the dash on
> a 2000 accord.Any help/suggestions would be great.Thanks.
The clock module simply pops out. Get a small straight screwdriver and
put it in the bottom of the clock module and gently pry. voila. It's
the easiest thing in the world.
If you need to get to the radio, you then unplug the clock module,
unscrew that single screw behind the clock module, unscrew the two
vertical screws at the bottom of that trim panel, then yank that whole
trim panel off. Put a rag or two into the clock module hole, get a good
grip, and pull. No big deal.
rkamp <gt3ked@yahoo.com> wrote:
> Anyone know how to disconnet the bolt/clip holding the clock to the dash on
> a 2000 accord.Any help/suggestions would be great.Thanks.
The clock module simply pops out. Get a small straight screwdriver and
put it in the bottom of the clock module and gently pry. voila. It's
the easiest thing in the world.
If you need to get to the radio, you then unplug the clock module,
unscrew that single screw behind the clock module, unscrew the two
vertical screws at the bottom of that trim panel, then yank that whole
trim panel off. Put a rag or two into the clock module hole, get a good
grip, and pull. No big deal.
09-04-2003, 10:27 AM
#5
Guest
Posts: n/a
Re: radio dissconnect 2000 accord
In article <Xns93EBEFF0FA4CAgt3kedyahoocom@130.81.64.196>,
rkamp <gt3ked@yahoo.com> wrote:
> Anyone know how to disconnet the bolt/clip holding the clock to the dash on
> a 2000 accord.Any help/suggestions would be great.Thanks.
The clock module simply pops out. Get a small straight screwdriver and
put it in the bottom of the clock module and gently pry. voila. It's
the easiest thing in the world.
If you need to get to the radio, you then unplug the clock module,
unscrew that single screw behind the clock module, unscrew the two
vertical screws at the bottom of that trim panel, then yank that whole
trim panel off. Put a rag or two into the clock module hole, get a good
grip, and pull. No big deal.
rkamp <gt3ked@yahoo.com> wrote:
> Anyone know how to disconnet the bolt/clip holding the clock to the dash on
> a 2000 accord.Any help/suggestions would be great.Thanks.
The clock module simply pops out. Get a small straight screwdriver and
put it in the bottom of the clock module and gently pry. voila. It's
the easiest thing in the world.
If you need to get to the radio, you then unplug the clock module,
unscrew that single screw behind the clock module, unscrew the two
vertical screws at the bottom of that trim panel, then yank that whole
trim panel off. Put a rag or two into the clock module hole, get a good
grip, and pull. No big deal.
Thread
Thread Starter
Forum
Replies
Last Post
misterh78
Hyundai Mailing List
8
09-23-2006 10:44 PM
misterh78
Hyundai Mailing List
0
09-22-2006 09:12 AM
Steve
Hyundai Mailing List
3
03-01-2006 06:00 PM
Steve
Hyundai Mailing List
0
03-01-2006 05:13 PM
Steve
Hyundai Mailing List
0
03-01-2006 05:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)