Re: HONDA ENGINEERS SUCK!
#1
Guest
Posts: n/a
Re: HONDA ENGINEERS SUCK!
>In article <1115161055.7f41e6e8c0eb35c36f1c72c83eea4a99@teran ews>, Tae Oh
<taeoh@hondasucks.com> wrote:
>
> I am not sure what the designers at Honda were smoking when they designed
> the Civic 2000. This model has a clearance that is lower than typical
> parking bars. So every time you pull up a parking spot or getting out of a
> drive way that is uneven with the road, you'd almost always manage to
> scrape off the bottom front part of your car!
>
> What the f*ck is wrong with those morons at Honda????
The Oldsmobile that I have now does not clear many "parking bars". The
Oldsmobile that I had before this one failed to clear some of them. The
Ford that I had before both of these Oldsmobiles failed to clear enough of
them.
So I surely don't blame Honda for the existence of "parking bars" that
can't be cleared by a Honda, Ford or Oldsmobile!
- Don Klipstein (don@misty.com)
<taeoh@hondasucks.com> wrote:
>
> I am not sure what the designers at Honda were smoking when they designed
> the Civic 2000. This model has a clearance that is lower than typical
> parking bars. So every time you pull up a parking spot or getting out of a
> drive way that is uneven with the road, you'd almost always manage to
> scrape off the bottom front part of your car!
>
> What the f*ck is wrong with those morons at Honda????
The Oldsmobile that I have now does not clear many "parking bars". The
Oldsmobile that I had before this one failed to clear some of them. The
Ford that I had before both of these Oldsmobiles failed to clear enough of
them.
So I surely don't blame Honda for the existence of "parking bars" that
can't be cleared by a Honda, Ford or Oldsmobile!
- Don Klipstein (don@misty.com)
Thread
Thread Starter
Forum
Replies
Last Post
Tush Smells Bush Kills!!!!!!!!!!!
Honda Mailing List
0
05-04-2005 01:02 PM
hyundai_sucks2003@yahoo.com
Hyundai Mailing List
0
04-23-2004 11:03 AM
hyundai_sucks2003@yahoo.com
Hyundai Mailing List
0
04-14-2004 12:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)