Removing Engine
04-13-2006, 03:50 PM
#1
Guest
Posts: n/a
Removing Engine
I have a 1994 honda prelude and i am in the prosses of taking the motor out and i am stuck i have alredy detached all the parts from the block itself and i am trying to pull it out but when ever i begin to pull the block it always gets stuck on the transsmision now i have tried to drop it striaght down but with knoe luck do you have any suggestions to make my life allitle easier
--
Ludedude94
-----------------------------------------------------------------------
View this thread: http://www.carstalk.net/viewtopic-404819.htm
Send from http://www.carstalk.ne
04-15-2006, 05:36 AM
#2
Guest
Posts: n/a
Re: Removing Engine
Ludedude94 wrote:
>
> I have a 1994 honda prelude and i am in the prosses of taking the motor
> out and i am stuck i have alredy detached all the parts from the block
> itself and i am trying to pull it out but when ever i begin to pull the
> block it always gets stuck on the transsmision now i have tried to drop
> it striaght down but with knoe luck do you have any suggestions to make
> my life allitle easier?
>
Have you pulled both axles? In addition, are you using a tilt bar? You can
see several examples here http://tinyurl.com/p9s2s. While I haven't pulled
a motor on a '94 'Lude, other Honda motors I've pulled require you to use a
tilt bar to angle the engine rather steeply before it will come out.
Eric
>
> I have a 1994 honda prelude and i am in the prosses of taking the motor
> out and i am stuck i have alredy detached all the parts from the block
> itself and i am trying to pull it out but when ever i begin to pull the
> block it always gets stuck on the transsmision now i have tried to drop
> it striaght down but with knoe luck do you have any suggestions to make
> my life allitle easier?
>
Have you pulled both axles? In addition, are you using a tilt bar? You can
see several examples here http://tinyurl.com/p9s2s. While I haven't pulled
a motor on a '94 'Lude, other Honda motors I've pulled require you to use a
tilt bar to angle the engine rather steeply before it will come out.
Eric
04-15-2006, 05:36 AM
#3
Guest
Posts: n/a
Re: Removing Engine
Ludedude94 wrote:
>
> I have a 1994 honda prelude and i am in the prosses of taking the motor
> out and i am stuck i have alredy detached all the parts from the block
> itself and i am trying to pull it out but when ever i begin to pull the
> block it always gets stuck on the transsmision now i have tried to drop
> it striaght down but with knoe luck do you have any suggestions to make
> my life allitle easier?
>
Have you pulled both axles? In addition, are you using a tilt bar? You can
see several examples here http://tinyurl.com/p9s2s. While I haven't pulled
a motor on a '94 'Lude, other Honda motors I've pulled require you to use a
tilt bar to angle the engine rather steeply before it will come out.
Eric
>
> I have a 1994 honda prelude and i am in the prosses of taking the motor
> out and i am stuck i have alredy detached all the parts from the block
> itself and i am trying to pull it out but when ever i begin to pull the
> block it always gets stuck on the transsmision now i have tried to drop
> it striaght down but with knoe luck do you have any suggestions to make
> my life allitle easier?
>
Have you pulled both axles? In addition, are you using a tilt bar? You can
see several examples here http://tinyurl.com/p9s2s. While I haven't pulled
a motor on a '94 'Lude, other Honda motors I've pulled require you to use a
tilt bar to angle the engine rather steeply before it will come out.
Eric
Thread
Thread Starter
Forum
Replies
Last Post
javi_oso3
honda / acura
1
11-13-2007 01:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)