Re: Repairing a bumper?
As you probably know already, body filler and common glues / adhesives
will not work well on plastic bumpers. 3M has an epoxy intended for use on polyethylene, polypropylene (which Honda uses in their bumpers) and other low surface tension plastics. It is in the Scotch-Weld family, and the part number is DP8005. Hardware stores do not carry it but industrial supply companies do. I bought it from R. S. Hughes, and they have locations all over the US. See http://rshughes.com/locationfinder/ When you buy it, also get the gun and a couple of mixing nozzles. The glue is intended for bonding parts together, but you can also use it to fill shallow dings and scratches. Or you could go to http://www.hondaautobodypartstore.com and get a new, after-market bumper. They are cheap. DaveC wrote: > > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote > (in message <bgekft$t7e$1@usc.edu>): > > > Dave > > I myself wanted to repair the bumper so went to Pep Boys and all they had to > > fill it was the body filler to fill up dents, > > and when I am doing a search online bumper filler is a part attached on the > > inner side of the bumper. > > So I thought I would ask you if you know any specific material to fill the > > gouge. > > Hmm... haven't heard of that part -- inside the bumper -- being called a > "filler". > > No luck finding gouge-filling material, either. > -- > Dave C > dave-usenet3016@mailblocks.com |
Re: Repairing a bumper?
As you probably know already, body filler and common glues / adhesives
will not work well on plastic bumpers. 3M has an epoxy intended for use on polyethylene, polypropylene (which Honda uses in their bumpers) and other low surface tension plastics. It is in the Scotch-Weld family, and the part number is DP8005. Hardware stores do not carry it but industrial supply companies do. I bought it from R. S. Hughes, and they have locations all over the US. See http://rshughes.com/locationfinder/ When you buy it, also get the gun and a couple of mixing nozzles. The glue is intended for bonding parts together, but you can also use it to fill shallow dings and scratches. Or you could go to http://www.hondaautobodypartstore.com and get a new, after-market bumper. They are cheap. DaveC wrote: > > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote > (in message <bgekft$t7e$1@usc.edu>): > > > Dave > > I myself wanted to repair the bumper so went to Pep Boys and all they had to > > fill it was the body filler to fill up dents, > > and when I am doing a search online bumper filler is a part attached on the > > inner side of the bumper. > > So I thought I would ask you if you know any specific material to fill the > > gouge. > > Hmm... haven't heard of that part -- inside the bumper -- being called a > "filler". > > No luck finding gouge-filling material, either. > -- > Dave C > dave-usenet3016@mailblocks.com |
Re: Repairing a bumper?
Well I guess then it seems cheaper and easier to go for the bumper kit
availabe on asseenontv.com http://www.asseenontv.com/prod-pages...id=ELECTRONICS Rather than buying the Scotch-Weld which seems expensive along with the other stuff u need to fix the dents/gouges in the bumper. Anybody any experience using this kit ? Thanks Dave and Randolph for inputs. ---------- Fight On ! "Randolph" <trash@junkmail.com> wrote in message news:3F2E96CE.53994FBC@junkmail.com... > As you probably know already, body filler and common glues / adhesives > will not work well on plastic bumpers. 3M has an epoxy intended for use > on polyethylene, polypropylene (which Honda uses in their bumpers) and > other low surface tension plastics. It is in the Scotch-Weld family, and > the part number is DP8005. Hardware stores do not carry it but > industrial supply companies do. I bought it from R. S. Hughes, and they > have locations all over the US. See http://rshughes.com/locationfinder/ > > When you buy it, also get the gun and a couple of mixing nozzles. The > glue is intended for bonding parts together, but you can also use it to > fill shallow dings and scratches. > > Or you could go to http://www.hondaautobodypartstore.com and get a new, > after-market bumper. They are cheap. > > DaveC wrote: > > > > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote > > (in message <bgekft$t7e$1@usc.edu>): > > > > > Dave > > > I myself wanted to repair the bumper so went to Pep Boys and all they had to > > > fill it was the body filler to fill up dents, > > > and when I am doing a search online bumper filler is a part attached on the > > > inner side of the bumper. > > > So I thought I would ask you if you know any specific material to fill the > > > gouge. > > > > Hmm... haven't heard of that part -- inside the bumper -- being called a > > "filler". > > > > No luck finding gouge-filling material, either. > > -- > > Dave C > > dave-usenet3016@mailblocks.com |
Re: Repairing a bumper?
Well I guess then it seems cheaper and easier to go for the bumper kit
availabe on asseenontv.com http://www.asseenontv.com/prod-pages...id=ELECTRONICS Rather than buying the Scotch-Weld which seems expensive along with the other stuff u need to fix the dents/gouges in the bumper. Anybody any experience using this kit ? Thanks Dave and Randolph for inputs. ---------- Fight On ! "Randolph" <trash@junkmail.com> wrote in message news:3F2E96CE.53994FBC@junkmail.com... > As you probably know already, body filler and common glues / adhesives > will not work well on plastic bumpers. 3M has an epoxy intended for use > on polyethylene, polypropylene (which Honda uses in their bumpers) and > other low surface tension plastics. It is in the Scotch-Weld family, and > the part number is DP8005. Hardware stores do not carry it but > industrial supply companies do. I bought it from R. S. Hughes, and they > have locations all over the US. See http://rshughes.com/locationfinder/ > > When you buy it, also get the gun and a couple of mixing nozzles. The > glue is intended for bonding parts together, but you can also use it to > fill shallow dings and scratches. > > Or you could go to http://www.hondaautobodypartstore.com and get a new, > after-market bumper. They are cheap. > > DaveC wrote: > > > > On Fri, 1 Aug 2003 14:01:56 -0700, Trojan wrote > > (in message <bgekft$t7e$1@usc.edu>): > > > > > Dave > > > I myself wanted to repair the bumper so went to Pep Boys and all they had to > > > fill it was the body filler to fill up dents, > > > and when I am doing a search online bumper filler is a part attached on the > > > inner side of the bumper. > > > So I thought I would ask you if you know any specific material to fill the > > > gouge. > > > > Hmm... haven't heard of that part -- inside the bumper -- being called a > > "filler". > > > > No luck finding gouge-filling material, either. > > -- > > Dave C > > dave-usenet3016@mailblocks.com |
All times are GMT -4. The time now is 09:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands