Replacing Oxygen Sensors
 

Greetings,

I have heard that one needs a "special tool" to replace the oxygen sensors.
Is this true?

Just wanted to find out before I buy the sensors.

Thanks a lot!

Re: Replacing Oxygen Sensors
 

On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen sensors.
> Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!

Depending on how little or how much room you have under the hood you
might want to get the O2 sensor socket. I have never bought one and I
will clip the wire off of the old sensor, use a regular socket to take
it out and then a wrench to put the new one in. I also always use a
penetrating lubricant before I try to take the old sensor out. I use a
product called PB Blaster, it works very well and you can find it at
most auto parts stores. Spray on a little several hours before you are
going to start and give it another spray two hours before you start.
If you do this the sensor should come out very easy if you don't and
it has welded itself to the manifold you might not get it out or you
might take some threads from the manifold with the sensor.

Re: Replacing Oxygen Sensors
 

On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen sensors.
> Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!

Depending on how little or how much room you have under the hood you
might want to get the O2 sensor socket. I have never bought one and I
will clip the wire off of the old sensor, use a regular socket to take
it out and then a wrench to put the new one in. I also always use a
penetrating lubricant before I try to take the old sensor out. I use a
product called PB Blaster, it works very well and you can find it at
most auto parts stores. Spray on a little several hours before you are
going to start and give it another spray two hours before you start.
If you do this the sensor should come out very easy if you don't and
it has welded itself to the manifold you might not get it out or you
might take some threads from the manifold with the sensor.

Re: Replacing Oxygen Sensors
 

On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen sensors.
> Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!

Depending on how little or how much room you have under the hood you
might want to get the O2 sensor socket. I have never bought one and I
will clip the wire off of the old sensor, use a regular socket to take
it out and then a wrench to put the new one in. I also always use a
penetrating lubricant before I try to take the old sensor out. I use a
product called PB Blaster, it works very well and you can find it at
most auto parts stores. Spray on a little several hours before you are
going to start and give it another spray two hours before you start.
If you do this the sensor should come out very easy if you don't and
it has welded itself to the manifold you might not get it out or you
might take some threads from the manifold with the sensor.

Re: Replacing Oxygen Sensors
 

<william1977@gmail.com> wrote in message
news:1182975879.953489.299410@x35g2000prf.googlegr oups.com...
> On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
> > Greetings,
> >
> > I have heard that one needs a "special tool" to replace the oxygen
sensors.
> > Is this true?
> >
> > Just wanted to find out before I buy the sensors.
> >
> > Thanks a lot!
>
> Depending on how little or how much room you have under the hood you
> might want to get the O2 sensor socket. I have never bought one and I
> will clip the wire off of the old sensor, use a regular socket to take
> it out and then a wrench to put the new one in. I also always use a
> penetrating lubricant before I try to take the old sensor out. I use a
> product called PB Blaster, it works very well and you can find it at
> most auto parts stores. Spray on a little several hours before you are
> going to start and give it another spray two hours before you start.
> If you do this the sensor should come out very easy if you don't and
> it has welded itself to the manifold you might not get it out or you
> might take some threads from the manifold with the sensor.
>

Thanks a million!!

Re: Replacing Oxygen Sensors
 

<william1977@gmail.com> wrote in message
news:1182975879.953489.299410@x35g2000prf.googlegr oups.com...
> On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
> > Greetings,
> >
> > I have heard that one needs a "special tool" to replace the oxygen
sensors.
> > Is this true?
> >
> > Just wanted to find out before I buy the sensors.
> >
> > Thanks a lot!
>
> Depending on how little or how much room you have under the hood you
> might want to get the O2 sensor socket. I have never bought one and I
> will clip the wire off of the old sensor, use a regular socket to take
> it out and then a wrench to put the new one in. I also always use a
> penetrating lubricant before I try to take the old sensor out. I use a
> product called PB Blaster, it works very well and you can find it at
> most auto parts stores. Spray on a little several hours before you are
> going to start and give it another spray two hours before you start.
> If you do this the sensor should come out very easy if you don't and
> it has welded itself to the manifold you might not get it out or you
> might take some threads from the manifold with the sensor.
>

Thanks a million!!

Re: Replacing Oxygen Sensors
 

<william1977@gmail.com> wrote in message
news:1182975879.953489.299410@x35g2000prf.googlegr oups.com...
> On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
> > Greetings,
> >
> > I have heard that one needs a "special tool" to replace the oxygen
sensors.
> > Is this true?
> >
> > Just wanted to find out before I buy the sensors.
> >
> > Thanks a lot!
>
> Depending on how little or how much room you have under the hood you
> might want to get the O2 sensor socket. I have never bought one and I
> will clip the wire off of the old sensor, use a regular socket to take
> it out and then a wrench to put the new one in. I also always use a
> penetrating lubricant before I try to take the old sensor out. I use a
> product called PB Blaster, it works very well and you can find it at
> most auto parts stores. Spray on a little several hours before you are
> going to start and give it another spray two hours before you start.
> If you do this the sensor should come out very easy if you don't and
> it has welded itself to the manifold you might not get it out or you
> might take some threads from the manifold with the sensor.
>

Thanks a million!!

Re: Replacing Oxygen Sensors
 

william1977@gmail.com wrote in
news:1182975879.953489.299410@x35g2000prf.googlegr oups.com:

> On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
>> Greetings,
>>
>> I have heard that one needs a "special tool" to replace the oxygen
>> sensors. Is this true?
>>
>> Just wanted to find out before I buy the sensors.
>>
>> Thanks a lot!
>
> Depending on how little or how much room you have under the hood you
> might want to get the O2 sensor socket. I have never bought one and I
> will clip the wire off of the old sensor, use a regular socket to take
> it out and then a wrench to put the new one in. I also always use a
> penetrating lubricant before I try to take the old sensor out. I use a
> product called PB Blaster, it works very well and you can find it at
> most auto parts stores. Spray on a little several hours before you are
> going to start and give it another spray two hours before you start.
> If you do this the sensor should come out very easy if you don't and
> it has welded itself to the manifold you might not get it out or you
> might take some threads from the manifold with the sensor.
>
>

you can rent a socket at most auto parts stores,and one chain will LOAN you
the socket if you buy the sensor there. The socket is cut to allow the
wires to pass thru it.

--
Jim Yanik
jyanik
at
kua.net

Re: Replacing Oxygen Sensors
 

william1977@gmail.com wrote in
news:1182975879.953489.299410@x35g2000prf.googlegr oups.com:

> On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
>> Greetings,
>>
>> I have heard that one needs a "special tool" to replace the oxygen
>> sensors. Is this true?
>>
>> Just wanted to find out before I buy the sensors.
>>
>> Thanks a lot!
>
> Depending on how little or how much room you have under the hood you
> might want to get the O2 sensor socket. I have never bought one and I
> will clip the wire off of the old sensor, use a regular socket to take
> it out and then a wrench to put the new one in. I also always use a
> penetrating lubricant before I try to take the old sensor out. I use a
> product called PB Blaster, it works very well and you can find it at
> most auto parts stores. Spray on a little several hours before you are
> going to start and give it another spray two hours before you start.
> If you do this the sensor should come out very easy if you don't and
> it has welded itself to the manifold you might not get it out or you
> might take some threads from the manifold with the sensor.
>
>

you can rent a socket at most auto parts stores,and one chain will LOAN you
the socket if you buy the sensor there. The socket is cut to allow the
wires to pass thru it.

--
Jim Yanik
jyanik
at
kua.net

Re: Replacing Oxygen Sensors
 

william1977@gmail.com wrote in
news:1182975879.953489.299410@x35g2000prf.googlegr oups.com:

> On Jun 27, 1:01 pm, "Stacek the Wise" <n...@spam.me> wrote:
>> Greetings,
>>
>> I have heard that one needs a "special tool" to replace the oxygen
>> sensors. Is this true?
>>
>> Just wanted to find out before I buy the sensors.
>>
>> Thanks a lot!
>
> Depending on how little or how much room you have under the hood you
> might want to get the O2 sensor socket. I have never bought one and I
> will clip the wire off of the old sensor, use a regular socket to take
> it out and then a wrench to put the new one in. I also always use a
> penetrating lubricant before I try to take the old sensor out. I use a
> product called PB Blaster, it works very well and you can find it at
> most auto parts stores. Spray on a little several hours before you are
> going to start and give it another spray two hours before you start.
> If you do this the sensor should come out very easy if you don't and
> it has welded itself to the manifold you might not get it out or you
> might take some threads from the manifold with the sensor.
>
>

you can rent a socket at most auto parts stores,and one chain will LOAN you
the socket if you buy the sensor there. The socket is cut to allow the
wires to pass thru it.

--
Jim Yanik
jyanik
at
kua.net

Re: Replacing Oxygen Sensors
 

"Stacek the Wise" <no@spam.me> wrote in
news:b3056$4682c220$18ec48d1$30768@KNOLOGY.NET:

> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen
> sensors. Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!
>
>


The "special tool" is a five-dollar socket with a slot down the side for
the wire. It's needed when INSTALLING the sensor. When you remove the old
one you typically cut the wire off first and use a regular 6-point socket.

Sensor sockets are widely available.

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Replacing Oxygen Sensors
 

"Stacek the Wise" <no@spam.me> wrote in
news:b3056$4682c220$18ec48d1$30768@KNOLOGY.NET:

> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen
> sensors. Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!
>
>


The "special tool" is a five-dollar socket with a slot down the side for
the wire. It's needed when INSTALLING the sensor. When you remove the old
one you typically cut the wire off first and use a regular 6-point socket.

Sensor sockets are widely available.

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Replacing Oxygen Sensors
 

"Stacek the Wise" <no@spam.me> wrote in
news:b3056$4682c220$18ec48d1$30768@KNOLOGY.NET:

> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen
> sensors. Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!
>
>


The "special tool" is a five-dollar socket with a slot down the side for
the wire. It's needed when INSTALLING the sensor. When you remove the old
one you typically cut the wire off first and use a regular 6-point socket.

Sensor sockets are widely available.

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Replacing Oxygen Sensors
 

AutoZone loaned me one. I left a deposit, but it was refunded when the tool
was returned.

Get the tool, and some penetrating oil, it will make life much easier.

G-Man


"Stacek the Wise" <no@spam.me> wrote in message
news:b3056$4682c220$18ec48d1$30768@KNOLOGY.NET...
> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen
> sensors.
> Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!
>
>

Re: Replacing Oxygen Sensors
 

AutoZone loaned me one. I left a deposit, but it was refunded when the tool
was returned.

Get the tool, and some penetrating oil, it will make life much easier.

G-Man


"Stacek the Wise" <no@spam.me> wrote in message
news:b3056$4682c220$18ec48d1$30768@KNOLOGY.NET...
> Greetings,
>
> I have heard that one needs a "special tool" to replace the oxygen
> sensors.
> Is this true?
>
> Just wanted to find out before I buy the sensors.
>
> Thanks a lot!
>
>