Seatbelt ding-ding-ding - 2005 Accord
 

Is there anyway to turn off the ding ding ding seatbelt warning on the 95
Accord EX? The light is fine, just the sound. Thanks

Re: Seatbelt ding-ding-ding - 2005 Accord
 

"RodgerDodger=\)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in
news:5ZOdnUf0rph8doDeRVn-iA@giganews.com:

> Is there anyway to turn off the ding ding ding seatbelt warning on the
> 95 Accord EX? The light is fine, just the sound. Thanks
>
>
>


1) Buckle belt behind your back.
2) Go to wrecker's. Cut buckle off old belt. Insert that into receptacle as
desired.

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Why not find the source of the ding ding ding and disconnect it?
"RodgerDodger=)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in message
news:5ZOdnUf0rph8doDeRVn-iA@giganews.com...
> Is there anyway to turn off the ding ding ding seatbelt warning on the 95
> Accord EX? The light is fine, just the sound. Thanks
>
>

Re: Seatbelt ding-ding-ding - 2005 Accord
 

use it the way it was designed... :)

RodgerDodger=)i wrote:
>Is there anyway to turn off the ding ding ding seatbelt warning on the 95
>Accord EX? The light is fine, just the sound. Thanks


--
Message posted via http://www.carkb.com

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Seat belts save lifes, so buckup!

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Waiving the right to remain silent, "TeGGeR®" <tegger@tegger.c0m>
said:

> "RodgerDodger=\)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in
> news:5ZOdnUf0rph8doDeRVn-iA@giganews.com:
>
>> Is there anyway to turn off the ding ding ding seatbelt warning
>> on the 95 Accord EX? The light is fine, just the sound.
>> Thanks
>>
>>
>>
>
>
> 1) Buckle belt behind your back.
> 2) Go to wrecker's. Cut buckle off old belt. Insert that into
> receptacle as desired.

Then go kill yourself, taking care not to injure any innocents...

--
Larry J. - Remove spamtrap in ALLCAPS to e-mail

The United States is the greatest country in the world..!
Eleven million illegal aliens can't be wrong.

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Wear it stupid!!!!

"RodgerDodger=)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in message
news:5ZOdnUf0rph8doDeRVn-iA@giganews.com...
> Is there anyway to turn off the ding ding ding seatbelt warning on the 95
> Accord EX? The light is fine, just the sound. Thanks
>

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Yes, thanks. I buckle everywhere. Everywhere, except, my 140 home
neighborhood that I drive 2mph mailbox to mailbox to deliver association
fliers (not in the mailbox of course for you postal inspectors) and the
seatbelt straps me in so well, I cannot reach out far enough to make a safe
delivery. So, for the 2 hour period once per month, I was hoping to to be
ding free.

"mopa" <buttakid@hotmail.com> wrote in message
news:1126041477.284310.196000@f14g2000cwb.googlegr oups.com...
> Seat belts save lifes, so buckup!
>

Yes, thanks. I buckle everywhere. Everywhere, except, my 140 home
neighborhood that I drive 2mph mailbox to mailbox to deliver association
fliers (not in the mailbox of course for you postal inspectors) and the
seatbelt straps me in so well, I cannot reach out far enough to make a safe
delivery. So, for the 2 hour period once per month, I was hoping to to be
ding free.

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Ha. RodgerDodger shut you yahoos down... lol

"RodgerDodger=)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote
> Yes, thanks. I buckle everywhere. Everywhere, except, my 140 home
> neighborhood that I drive 2mph mailbox to mailbox to deliver association
> fliers (not in the mailbox of course for you postal inspectors) and the
> seatbelt straps me in so well, I cannot reach out far enough to make a
safe
> delivery. So, for the 2 hour period once per month, I was hoping to to be
> ding free.

Re: Seatbelt ding-ding-ding - 2005 Accord
 

"RodgerDodger=)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in message
news:5ZOdnUf0rph8doDeRVn-iA@giganews.com...
> Is there anyway to turn off the ding ding ding seatbelt warning on the 95
> Accord EX? The light is fine, just the sound. Thanks

The smartest way to disable the sound is to wear the seatbelt. That way you
won't become disabled.

Brian

Re: Seatbelt ding-ding-ding - 2005 Accord
 

On 9/6/2005 5:28 PM RodgerDodger=)i spake these words of knowledge:

> Yes, thanks. I buckle everywhere. Everywhere, except, my 140 home
> neighborhood that I drive 2mph mailbox to mailbox to deliver association
> fliers (not in the mailbox of course for you postal inspectors) and the
> seatbelt straps me in so well, I cannot reach out far enough to make a safe
> delivery. So, for the 2 hour period once per month, I was hoping to to be
> ding free.
>

As someone said, buckle it behind you. No problem.

RFT!!!
Dave Kelsen
--
.... "I have as much authority as the Pope, I just don't have as many
people who believe it." -- George Carlin

Re: Seatbelt ding-ding-ding - 2005 Accord
 

"Grahame" <grahame.news@sympatico.ca> wrote in
news:GUqTe.11436$I02.595878@news20.bellglobal.com:

> "RodgerDodger=)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in message
> news:5ZOdnUf0rph8doDeRVn-iA@giganews.com...
>> Is there anyway to turn off the ding ding ding seatbelt warning on
>> the 95 Accord EX? The light is fine, just the sound. Thanks
>>
>>
>
>
> Why not find the source of the ding ding ding and disconnect it?



Harder than it sounds. It means removing the Integrated Control Module from
its (very good) hiding place, and putting a wood screw in the speaker to
stop the diaphragm from vibrating. This is what I've done with my Integra.

I was going to just unsolder the speaker and replace it with a resistor,
but I don't know how to determine the rating of resistor that would be
needed.



--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

"Larry J." <usenet2@DE.LETE.THISljvideo.com> wrote in
news:Xns96C9930DBC0A4larrythefrog@68.6.19.6:

> Waiving the right to remain silent, "TeGGeR®" <tegger@tegger.c0m>
> said:
>
>> "RodgerDodger=\)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in
>> news:5ZOdnUf0rph8doDeRVn-iA@giganews.com:
>>
>>> Is there anyway to turn off the ding ding ding seatbelt warning
>>> on the 95 Accord EX? The light is fine, just the sound.
>>> Thanks
>>>
>>>
>>>
>>
>>
>> 1) Buckle belt behind your back.
>> 2) Go to wrecker's. Cut buckle off old belt. Insert that into
>> receptacle as desired.
>
> Then go kill yourself, taking care not to injure any innocents...
>


You gonna moralize or are you gonna answer his question? Go take your
politics to alt.autos.toyota.

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Why would you need to replace the speaker with a resistor?

"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns96C9DEA386148tegger@207.14.113.17...
> "Grahame" <grahame.news@sympatico.ca> wrote in
> news:GUqTe.11436$I02.595878@news20.bellglobal.com:
>
> > "RodgerDodger=)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in message
> > news:5ZOdnUf0rph8doDeRVn-iA@giganews.com...
> >> Is there anyway to turn off the ding ding ding seatbelt warning on
> >> the 95 Accord EX? The light is fine, just the sound. Thanks
> >>
> >>
> >
> >
> > Why not find the source of the ding ding ding and disconnect it?
>
>
>
> Harder than it sounds. It means removing the Integrated Control Module
from
> its (very good) hiding place, and putting a wood screw in the speaker to
> stop the diaphragm from vibrating. This is what I've done with my Integra.
>
> I was going to just unsolder the speaker and replace it with a resistor,
> but I don't know how to determine the rating of resistor that would be
> needed.
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

"Grahame" <grahame.news@sympatico.ca> wrote in
news:0qITe.14710$I02.772391@news20.bellglobal.com:

>
> "TeGGeR®" <tegger@tegger.c0m> wrote in message
> news:Xns96C9DEA386148tegger@207.14.113.17...

>> I was going to just unsolder the speaker and replace it with a
>> resistor, but I don't know how to determine the rating of resistor
>> that would be needed.
>
>
> Why would you need to replace the speaker with a resistor?


I supposed that the module would expect some sort of current and resistance
to be present in that location, otherwise problems may arise.

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

I suggest swapping the wiring on the plug under the seat to swap the
normally open/normally closed contacts. That way it will only annoy people
who buckle/use the seat belt. If you just unplug the connector, it will flag
an SRS error which will have to be manually cleared.


"RodgerDodger=)i" <ddlld23REMOVE@XXcsiREMOVE.com> wrote in message
news:5ZOdnUf0rph8doDeRVn-iA@giganews.com...
> Is there anyway to turn off the ding ding ding seatbelt warning on the 95
> Accord EX? The light is fine, just the sound. Thanks
>

Re: Seatbelt ding-ding-ding - 2005 Accord
 

If you just removed the speaker from the circuit I do not see this causing
any problems, I doubt the engineers would design a "speaker missing detect
circuit". This is a lot easier than using your method of killing the sound.
A speaker is considered an inductive load and the resistance would
essentially be zero.
Grahame
"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns96CAB5EE3E74Etegger@207.14.113.17...
> "Grahame" <grahame.news@sympatico.ca> wrote in
> news:0qITe.14710$I02.772391@news20.bellglobal.com:
>
> >
> > "TeGGeR®" <tegger@tegger.c0m> wrote in message
> > news:Xns96C9DEA386148tegger@207.14.113.17...
>
> >> I was going to just unsolder the speaker and replace it with a
> >> resistor, but I don't know how to determine the rating of resistor
> >> that would be needed.
> >
> >
> > Why would you need to replace the speaker with a resistor?
>
>
> I supposed that the module would expect some sort of current and
resistance
> to be present in that location, otherwise problems may arise.
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Grahame <grahame.news@sympatico.ca> wrote in message
news:oS3Ue.21852$vN.720670@news20.bellglobal.com.. .
> If you just removed the speaker from the circuit I do not see this causing
> any problems, I doubt the engineers would design a "speaker missing detect
> circuit". This is a lot easier than using your method of killing the sound.
> A speaker is considered an inductive load and the resistance would
> essentially be zero.
> Grahame
Can't blame "TeGGeR®" for erring on the side of caution, but I'm inclined to
agree with you.
However, suppose the "speaker" is piezo? Probably your main argument still
applies, but
the resistance would be way high, rather than nearly zero.

Re: Seatbelt ding-ding-ding - 2005 Accord
 

"Doug McCrary" <DougMcCrary@spamcop.net> wrote in
news:Z08Ue.3504$%f2.1385@trnddc09:

>
> Grahame <grahame.news@sympatico.ca> wrote in message
> news:oS3Ue.21852$vN.720670@news20.bellglobal.com.. .
>> If you just removed the speaker from the circuit I do not see this
>> causing any problems, I doubt the engineers would design a "speaker
>> missing detect circuit". This is a lot easier than using your method
>> of killing the sound. A speaker is considered an inductive load and
>> the resistance would essentially be zero.
>
>
>
>
> Can't blame "TeGGeR®" for erring on the side of caution,


Ignorance breeds caution, hence my decision to simply hand-tighten a short
#8 wood screw against the metal diaphragm through the hole in the speaker's
plastic top. I can undo this any time I want.



> but I'm
> inclined to agree with you.
> However, suppose the "speaker" is piezo?



In this case, it is. It's the same sort of "speaker" you find on computer
modems and motherboards. It's maybe a half-inch across, and three-eighths
thick.



> Probably your main argument
> still applies, but
> the resistance would be way high, rather than nearly zero.


Thus requiring a resistor?



--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

Well TeGGeR, I have been an electronics technician for over 25 years now and
I know exactly the type of speaker you are talking about, remove the speaker
and you have an open circuit, the computer would function normally trust me.
Grahame
"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns96CC4EC9965D2tegger@207.14.113.17...
> "Doug McCrary" <DougMcCrary@spamcop.net> wrote in
> news:Z08Ue.3504$%f2.1385@trnddc09:
>
> >
> > Grahame <grahame.news@sympatico.ca> wrote in message
> > news:oS3Ue.21852$vN.720670@news20.bellglobal.com.. .
> >> If you just removed the speaker from the circuit I do not see this
> >> causing any problems, I doubt the engineers would design a "speaker
> >> missing detect circuit". This is a lot easier than using your method
> >> of killing the sound. A speaker is considered an inductive load and
> >> the resistance would essentially be zero.
> >
> >
> >
> >
> > Can't blame "TeGGeR®" for erring on the side of caution,
>
>
> Ignorance breeds caution, hence my decision to simply hand-tighten a short
> #8 wood screw against the metal diaphragm through the hole in the
speaker's
> plastic top. I can undo this any time I want.
>
>
>
> > but I'm
> > inclined to agree with you.
> > However, suppose the "speaker" is piezo?
>
>
>
> In this case, it is. It's the same sort of "speaker" you find on computer
> modems and motherboards. It's maybe a half-inch across, and three-eighths
> thick.
>
>
>
> > Probably your main argument
> > still applies, but
> > the resistance would be way high, rather than nearly zero.
>
>
> Thus requiring a resistor?
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

Re: Seatbelt ding-ding-ding - 2005 Accord
 

TeGGeR® <tegger@tegger.c0m> wrote in message
news:Xns96CC4EC9965D2tegger@207.14.113.17...
> "Doug McCrary" <DougMcCrary@spamcop.net> wrote
> In this case, it is. It's the same sort of "speaker" you find on computer
> modems and motherboards. It's maybe a half-inch across, and three-eighths
> thick.
>
>
>
> > Probably your main argument
> > still applies, but
> > the resistance would be way high, rather than nearly zero.
>
>
> Thus requiring a resistor?
>
Unlikely. As Grahame says, there's probably no 'sense' circuit, and either way,
it's unlikely to cause anything to burn up.
High power stuff that might fail to to over/underload usually has the sensing.
Most other stuff is designed to handle anything from a dead short to open
without fail.

Re: Seatbelt ding-ding-ding - 2005 Accord
 

"Doug McCrary" <DougMcCrary@spamcop.net> wrote in
news:gNuUe.952$b37.922@trnddc04:

>
> TeGGeR® <tegger@tegger.c0m> wrote in message
> news:Xns96CC4EC9965D2tegger@207.14.113.17...
>> "Doug McCrary" <DougMcCrary@spamcop.net> wrote
>> In this case, it is. It's the same sort of "speaker" you find on
>> computer modems and motherboards. It's maybe a half-inch across, and
>> three-eighths thick.
>>
>>
>>
>> > Probably your main argument
>> > still applies, but
>> > the resistance would be way high, rather than nearly zero.
>>
>>
>> Thus requiring a resistor?
>>
> Unlikely. As Grahame says, there's probably no 'sense' circuit, and
> either way, it's unlikely to cause anything to burn up.
> High power stuff that might fail to to over/underload usually has the
> sensing. Most other stuff is designed to handle anything from a dead
> short to open without fail.
>
>
>


Thaks.

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/