|
service in Lewisville TX?
Anyone have any reviews or opinions about Jim McNatt Honda service on
I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I noticed after taking the front wheel off that there is a crimp on the nut that holds the wheel on. (Can provide picture) Is this done at the factory? Thanks-Satellite in Dallas |
Re: service in Lewisville TX?
mcnatt no longer owns that dealership. it has moved across I35 and is now
bankston. when i went for service (at bankston), they did a great job. i would go back. "satellite" <trispeed@airmail.net> wrote in message news:c05qmp$od5@library1.airnews.net... Anyone have any reviews or opinions about Jim McNatt Honda service on I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I noticed after taking the front wheel off that there is a crimp on the nut that holds the wheel on. (Can provide picture) Is this done at the factory? Thanks-Satellite in Dallas --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.580 / Virus Database: 367 - Release Date: 2/6/2004 |
Re: service in Lewisville TX?
mcnatt no longer owns that dealership. it has moved across I35 and is now
bankston. when i went for service (at bankston), they did a great job. i would go back. "satellite" <trispeed@airmail.net> wrote in message news:c05qmp$od5@library1.airnews.net... Anyone have any reviews or opinions about Jim McNatt Honda service on I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I noticed after taking the front wheel off that there is a crimp on the nut that holds the wheel on. (Can provide picture) Is this done at the factory? Thanks-Satellite in Dallas --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.580 / Virus Database: 367 - Release Date: 2/6/2004 |
Re: service in Lewisville TX?
mcnatt no longer owns that dealership. it has moved across I35 and is now
bankston. when i went for service (at bankston), they did a great job. i would go back. "satellite" <trispeed@airmail.net> wrote in message news:c05qmp$od5@library1.airnews.net... Anyone have any reviews or opinions about Jim McNatt Honda service on I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I noticed after taking the front wheel off that there is a crimp on the nut that holds the wheel on. (Can provide picture) Is this done at the factory? Thanks-Satellite in Dallas --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.580 / Virus Database: 367 - Release Date: 2/6/2004 |
Re: service in Lewisville TX?
mcnatt no longer owns that dealership. it has moved across I35 and is now
bankston. when i went for service (at bankston), they did a great job. i would go back. "satellite" <trispeed@airmail.net> wrote in message news:c05qmp$od5@library1.airnews.net... Anyone have any reviews or opinions about Jim McNatt Honda service on I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I noticed after taking the front wheel off that there is a crimp on the nut that holds the wheel on. (Can provide picture) Is this done at the factory? Thanks-Satellite in Dallas --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.580 / Virus Database: 367 - Release Date: 2/6/2004 |
Re: service in Lewisville TX?
"satellite" <trispeed@airmail.net> wrote in
news:c05qmp$od5@library1.airnews.net: > Anyone have any reviews or opinions about Jim McNatt Honda service > on I-35(Stemmons) in Lewisville TX? There is no longer a Jim McNatt Honda on I-35, the lot is empty. Bankston Honda bought them out, they are located on the east side of I- 35, just north of Hebron parkway/3640 (right past Bennigans.) If you are looking for good service for your Honda, you may want to try Honda House (also called Swedish Auto) in Carrollton. I've used them for the past 8 years or so, they do quality work, usually cheaper than Honda. You can call them at 972-644-6632. |
Re: service in Lewisville TX?
"satellite" <trispeed@airmail.net> wrote in
news:c05qmp$od5@library1.airnews.net: > Anyone have any reviews or opinions about Jim McNatt Honda service > on I-35(Stemmons) in Lewisville TX? There is no longer a Jim McNatt Honda on I-35, the lot is empty. Bankston Honda bought them out, they are located on the east side of I- 35, just north of Hebron parkway/3640 (right past Bennigans.) If you are looking for good service for your Honda, you may want to try Honda House (also called Swedish Auto) in Carrollton. I've used them for the past 8 years or so, they do quality work, usually cheaper than Honda. You can call them at 972-644-6632. |
Re: service in Lewisville TX?
"satellite" <trispeed@airmail.net> wrote in
news:c05qmp$od5@library1.airnews.net: > Anyone have any reviews or opinions about Jim McNatt Honda service > on I-35(Stemmons) in Lewisville TX? There is no longer a Jim McNatt Honda on I-35, the lot is empty. Bankston Honda bought them out, they are located on the east side of I- 35, just north of Hebron parkway/3640 (right past Bennigans.) If you are looking for good service for your Honda, you may want to try Honda House (also called Swedish Auto) in Carrollton. I've used them for the past 8 years or so, they do quality work, usually cheaper than Honda. You can call them at 972-644-6632. |
Re: service in Lewisville TX?
"satellite" <trispeed@airmail.net> wrote in
news:c05qmp$od5@library1.airnews.net: > Anyone have any reviews or opinions about Jim McNatt Honda service > on I-35(Stemmons) in Lewisville TX? There is no longer a Jim McNatt Honda on I-35, the lot is empty. Bankston Honda bought them out, they are located on the east side of I- 35, just north of Hebron parkway/3640 (right past Bennigans.) If you are looking for good service for your Honda, you may want to try Honda House (also called Swedish Auto) in Carrollton. I've used them for the past 8 years or so, they do quality work, usually cheaper than Honda. You can call them at 972-644-6632. |
Re: service in Lewisville TX?
The crimp is there to prevent the nut from turning. Most manufacturers have gone this route now, instead of using a cotter pin. I usually use an "ice pick" type tool and a light hammer to straighten the crimp before removing the nut. On Sun, 8 Feb 2004 11:11:27 -0600, "satellite" <trispeed@airmail.net> wrote: >Anyone have any reviews or opinions about Jim McNatt Honda service on >I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I >noticed after taking the front wheel off that there is a crimp on the nut >that holds the wheel on. (Can provide picture) Is this done at the factory? >Thanks-Satellite in Dallas > |
Re: service in Lewisville TX?
The crimp is there to prevent the nut from turning. Most manufacturers have gone this route now, instead of using a cotter pin. I usually use an "ice pick" type tool and a light hammer to straighten the crimp before removing the nut. On Sun, 8 Feb 2004 11:11:27 -0600, "satellite" <trispeed@airmail.net> wrote: >Anyone have any reviews or opinions about Jim McNatt Honda service on >I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I >noticed after taking the front wheel off that there is a crimp on the nut >that holds the wheel on. (Can provide picture) Is this done at the factory? >Thanks-Satellite in Dallas > |
Re: service in Lewisville TX?
The crimp is there to prevent the nut from turning. Most manufacturers have gone this route now, instead of using a cotter pin. I usually use an "ice pick" type tool and a light hammer to straighten the crimp before removing the nut. On Sun, 8 Feb 2004 11:11:27 -0600, "satellite" <trispeed@airmail.net> wrote: >Anyone have any reviews or opinions about Jim McNatt Honda service on >I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I >noticed after taking the front wheel off that there is a crimp on the nut >that holds the wheel on. (Can provide picture) Is this done at the factory? >Thanks-Satellite in Dallas > |
Re: service in Lewisville TX?
The crimp is there to prevent the nut from turning. Most manufacturers have gone this route now, instead of using a cotter pin. I usually use an "ice pick" type tool and a light hammer to straighten the crimp before removing the nut. On Sun, 8 Feb 2004 11:11:27 -0600, "satellite" <trispeed@airmail.net> wrote: >Anyone have any reviews or opinions about Jim McNatt Honda service on >I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I >noticed after taking the front wheel off that there is a crimp on the nut >that holds the wheel on. (Can provide picture) Is this done at the factory? >Thanks-Satellite in Dallas > |
Re: service in Lewisville TX?
Thanks very much to all who replied! Much appreciated information!-Satellite
"satellite" <trispeed@airmail.net> wrote in message news:c05qmp$od5@library1.airnews.net... > Anyone have any reviews or opinions about Jim McNatt Honda service on > I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I > noticed after taking the front wheel off that there is a crimp on the nut > that holds the wheel on. (Can provide picture) Is this done at the factory? > Thanks-Satellite in Dallas > > |
Re: service in Lewisville TX?
Thanks very much to all who replied! Much appreciated information!-Satellite
"satellite" <trispeed@airmail.net> wrote in message news:c05qmp$od5@library1.airnews.net... > Anyone have any reviews or opinions about Jim McNatt Honda service on > I-35(Stemmons) in Lewisville TX? I need to service my 91 Accord. Also, I > noticed after taking the front wheel off that there is a crimp on the nut > that holds the wheel on. (Can provide picture) Is this done at the factory? > Thanks-Satellite in Dallas > > |
| All times are GMT -4. The time now is 02:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands