Slightly OT: Mazda Protege engine noise
#1
Guest
Posts: n/a
Slightly OT: Mazda Protege engine noise
I know it's not a Mazda group, but it's a pretty bright lot in here, and
I doubt this issue is really Mazda-specific.
We just completed an engine swap (1.8l four, auto, EFI) in my buddy's
'93 Protege, and while the new engine (well, used, from a wrecker) fired
right up and seems to run smoothly, there are some bad noises. One is a
steady clicking that appears to be one of the injectors. That one
doesn't worry us so much, but what does is the rattling/clanking sound
that SEEMS to be coming from the intake manifold and/or throttle body.
It almost sounds like something lose banging around, as it's steady in
time with the engine at idle, and starts after the engine starts to
warm, gets worse as it warms up, and seems to go away when we rev.
Everything bolted to the back of the engine seems tight and solid; there
doesn't appear to be any "outside" source of the noise. We're wondering
if it might be an intake valve and the noise is just travelling up the
manifold such that it seems to come from there.
Any other ideas of what to look at? Any help is appreciated...
---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0545-2, 11/11/2005
Tested on: 11/13/2005 10:26:02 PM
avast! - copyright (c) 1988-2005 ALWIL Software.
http://www.avast.com
I doubt this issue is really Mazda-specific.
We just completed an engine swap (1.8l four, auto, EFI) in my buddy's
'93 Protege, and while the new engine (well, used, from a wrecker) fired
right up and seems to run smoothly, there are some bad noises. One is a
steady clicking that appears to be one of the injectors. That one
doesn't worry us so much, but what does is the rattling/clanking sound
that SEEMS to be coming from the intake manifold and/or throttle body.
It almost sounds like something lose banging around, as it's steady in
time with the engine at idle, and starts after the engine starts to
warm, gets worse as it warms up, and seems to go away when we rev.
Everything bolted to the back of the engine seems tight and solid; there
doesn't appear to be any "outside" source of the noise. We're wondering
if it might be an intake valve and the noise is just travelling up the
manifold such that it seems to come from there.
Any other ideas of what to look at? Any help is appreciated...
---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0545-2, 11/11/2005
Tested on: 11/13/2005 10:26:02 PM
avast! - copyright (c) 1988-2005 ALWIL Software.
http://www.avast.com
#2
Guest
Posts: n/a
Re: Slightly OT: Mazda Protege engine noise
Built ford tough
"Matt Ion" <soundy@moltenimage.com> wrote in message
news:86Wdf.495786$oW2.406312@pd7tw1no...
>I know it's not a Mazda group, but it's a pretty bright lot in here, and I
>doubt this issue is really Mazda-specific.
>
> We just completed an engine swap (1.8l four, auto, EFI) in my buddy's '93
> Protege, and while the new engine (well, used, from a wrecker) fired right
> up and seems to run smoothly, there are some bad noises. One is a steady
> clicking that appears to be one of the injectors. That one doesn't worry
> us so much, but what does is the rattling/clanking sound that SEEMS to be
> coming from the intake manifold and/or throttle body. It almost sounds
> like something lose banging around, as it's steady in time with the engine
> at idle, and starts after the engine starts to warm, gets worse as it
> warms up, and seems to go away when we rev.
>
> Everything bolted to the back of the engine seems tight and solid; there
> doesn't appear to be any "outside" source of the noise. We're wondering
> if it might be an intake valve and the noise is just travelling up the
> manifold such that it seems to come from there.
>
> Any other ideas of what to look at? Any help is appreciated...
>
>
> ---
> avast! Antivirus: Outbound message clean.
> Virus Database (VPS): 0545-2, 11/11/2005
> Tested on: 11/13/2005 10:26:02 PM
> avast! - copyright (c) 1988-2005 ALWIL Software.
> http://www.avast.com
>
>
>
"Matt Ion" <soundy@moltenimage.com> wrote in message
news:86Wdf.495786$oW2.406312@pd7tw1no...
>I know it's not a Mazda group, but it's a pretty bright lot in here, and I
>doubt this issue is really Mazda-specific.
>
> We just completed an engine swap (1.8l four, auto, EFI) in my buddy's '93
> Protege, and while the new engine (well, used, from a wrecker) fired right
> up and seems to run smoothly, there are some bad noises. One is a steady
> clicking that appears to be one of the injectors. That one doesn't worry
> us so much, but what does is the rattling/clanking sound that SEEMS to be
> coming from the intake manifold and/or throttle body. It almost sounds
> like something lose banging around, as it's steady in time with the engine
> at idle, and starts after the engine starts to warm, gets worse as it
> warms up, and seems to go away when we rev.
>
> Everything bolted to the back of the engine seems tight and solid; there
> doesn't appear to be any "outside" source of the noise. We're wondering
> if it might be an intake valve and the noise is just travelling up the
> manifold such that it seems to come from there.
>
> Any other ideas of what to look at? Any help is appreciated...
>
>
> ---
> avast! Antivirus: Outbound message clean.
> Virus Database (VPS): 0545-2, 11/11/2005
> Tested on: 11/13/2005 10:26:02 PM
> avast! - copyright (c) 1988-2005 ALWIL Software.
> http://www.avast.com
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)