Starter Question
 

I recently installed a new starter in my 1990 Honda Civic. Now when I
turn the key to crank the engine, unless I am very gentle and quick
with the key, there comes a grinding sound from the starter � the
same noise you get when you mistakenly turn the ignition key when your
car is already running. The car starts, but that noise can't be
good. Any ideas what's causing it?

--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Starter-ftopict152453.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=732064

Re: Starter Question
 

sounds like a faulty solenoid. Was the start new?

OR

you didn't tighten all the bolts all the way and the started is not square
with the flywheel. grindy grindy! take a look and fix it quick, the
flywheel is NOT easy to replace.


t

sprog wrote:
>I recently installed a new starter in my 1990 Honda Civic. Now when I
>turn the key to crank the engine, unless I am very gentle and quick
>with the key, there comes a grinding sound from the starter � the
>same noise you get when you mistakenly turn the ignition key when your
>car is already running. The car starts, but that noise can't be
>good. Any ideas what's causing it?

--
Message posted via http://www.carkb.com

Re: Starter Question
 

Your problem sounds like misalignment... were there any shims on the
old starter?

Professor
www.telstar-electronics.com