Timing Belt Cover - do I need to replace it?
Hi, I'm doing a swap of a 97 Accord F22B1 for a H23A1 into my 95
Prelude. I was going to replace the timing belt on the F22 since that's what broke on the H23 and I think it's been done already. The reason I say this is the lower cover has a hole in it from the belt rubbing. It looks like the cover was never (re)installed correctly and the top edge around the crankshaft pulley wasn't seated behind the pully but was in front, hence the rub of the belt. My buddy says not to replace the cover and that this problem even exists on engines as they leave the factory. I wanted to get some more opinions before I decide. Thoughts? Thanx RJ |
Re: Timing Belt Cover - do I need to replace it?
I would not like the easier access of dust and water to all
the moving parts. Used Honda TB covers are abundant at junkyards. Should cost you just a few bucks. I do not recall reports of this problem (TB cover rubbing against whatever) here. |
Re: Timing Belt Cover - do I need to replace it?
rmiller wrote: > Hi, I'm doing a swap of a 97 Accord F22B1 for a H23A1 into my 95 > Prelude. I was going to replace the timing belt on the F22 since > that's what broke on the H23 and I think it's been done already. > > The reason I say this is the lower cover has a hole in it from the > belt rubbing. It looks like the cover was never (re)installed > correctly and the top edge around the crankshaft pulley wasn't seated > behind the pully but was in front, hence the rub of the belt. > > My buddy says not to replace the cover and that this problem even > exists on engines as they leave the factory. > > I wanted to get some more opinions before I decide. > > Thoughts? > > Thanx > > RJ I would tend to agree with your friend. Both of my timing belt covers on my '82 & '83 Civics have "holes" where the pulleys have worn sections. Plastic covers simply distort in high engine compartment temperatures. JT |
Re: Timing Belt Cover - do I need to replace it?
Grumpy AuContraire <Grumpy@ExtraGrumpyville.com> wrote in news:Em3sj.585356
$kj1.63130@bgtnsc04-news.ops.worldnet.att.net: > > Both of my timing belt covers on my '82 & '83 Civics have "holes" where > the pulleys have worn sections. Plastic covers simply distort in high > engine compartment temperatures. > > > > People also sometimes install belts too loosely. -- Tegger The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: Timing Belt Cover - do I need to replace it?
rmiller wrote:
> Hi, I'm doing a swap of a 97 Accord F22B1 for a H23A1 into my 95 > Prelude. I was going to replace the timing belt on the F22 since > that's what broke on the H23 and I think it's been done already. > > The reason I say this is the lower cover has a hole in it from the > belt rubbing. It looks like the cover was never (re)installed > correctly and the top edge around the crankshaft pulley wasn't seated > behind the pully but was in front, hence the rub of the belt. > > My buddy says not to replace the cover and that this problem even > exists on engines as they leave the factory. no, the cover is there for a reason. all kinds of junk blows up under the hood from time to time. you don't want sticks or stones getting lodged in the timing belt. the only people that run without covers are those into adjustable cam timing, or who want to show off their colored aluminum cam gears. > > I wanted to get some more opinions before I decide. > > Thoughts? > > Thanx > > RJ |
Re: Timing Belt Cover - do I need to replace it?
Tegger wrote:
> Grumpy AuContraire <Grumpy@ExtraGrumpyville.com> wrote in news:Em3sj.585356 > $kj1.63130@bgtnsc04-news.ops.worldnet.att.net: > > >> Both of my timing belt covers on my '82 & '83 Civics have "holes" where >> the pulleys have worn sections. Plastic covers simply distort in high >> engine compartment temperatures. >> >> >> >> > > > People also sometimes install belts too loosely. > > exactly - properly adjusted belts [of the right quality that track straight] do not wear holes in the covers. |
Re: Timing Belt Cover - do I need to replace it?
Tegger wrote: > Grumpy AuContraire <Grumpy@ExtraGrumpyville.com> wrote in news:Em3sj.585356 > $kj1.63130@bgtnsc04-news.ops.worldnet.att.net: > > > >>Both of my timing belt covers on my '82 & '83 Civics have "holes" where >>the pulleys have worn sections. Plastic covers simply distort in high >>engine compartment temperatures. >> >> >> >> > > > > People also sometimes install belts too loosely. > > Hey bub... Y' accusin' me of being "loose?" <G> JT |
Re: Timing Belt Cover - do I need to replace it?
jim beam wrote: > Tegger wrote: > >> Grumpy AuContraire <Grumpy@ExtraGrumpyville.com> wrote in >> news:Em3sj.585356 >> $kj1.63130@bgtnsc04-news.ops.worldnet.att.net: >> >> >>> Both of my timing belt covers on my '82 & '83 Civics have "holes" >>> where the pulleys have worn sections. Plastic covers simply distort >>> in high engine compartment temperatures. >>> >>> >>> >>> >> >> >> People also sometimes install belts too loosely. >> >> > > exactly - properly adjusted belts [of the right quality that track > straight] do not wear holes in the covers. Au contraire... The holes in my covers were caused by distortion in the cover over the the lower pulley. Both cars exhibit the same malady.. JT |
All times are GMT -4. The time now is 10:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands