GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   Timing belt Replacement (https://www.gtcarz.com/honda-mailing-list-327/timing-belt-replacement-291867/)

twfsa 06-13-2006 07:10 AM

Timing belt Replacement
 
What should I expect to pay for timing belt and water pump replacment on 98
civic.

Thanks
Tom



Elle 06-13-2006 08:50 AM

Re: Timing belt Replacement
 
Around $450 to $800.

Make sure new shaft oil seals on the camshaft and crankshaft
are included. Also, if the tensioner was not changed at the
last TB change, consider having it changed, too.

Since the water pump comes off during this job, some coolant
will drain. If an independent import car shop does the job,
make sure it tops off the cooling system with only OEM
coolant at the end of the job. If the shop says it doesn't
have this, buy a gallon jug at the dealer for around $15 and
provide it to the shop.

You might consider purchasing the necessary parts separately
from an online genuine Honda parts dealer, such as
www.slhonda.com or www.hondaautomotiveparts.com . Of course,
some shops already charge lower prices for parts used in
work they do for you.

Dealer prices tend to be a bit higher; independent import
car shops, lower.

You should call around to get quotes.

"twfsa" <twfuksa@qwest.net> wrote
> What should I expect to pay for timing belt and water pump
> replacment on 98 civic.




Elle 06-13-2006 08:50 AM

Re: Timing belt Replacement
 
Around $450 to $800.

Make sure new shaft oil seals on the camshaft and crankshaft
are included. Also, if the tensioner was not changed at the
last TB change, consider having it changed, too.

Since the water pump comes off during this job, some coolant
will drain. If an independent import car shop does the job,
make sure it tops off the cooling system with only OEM
coolant at the end of the job. If the shop says it doesn't
have this, buy a gallon jug at the dealer for around $15 and
provide it to the shop.

You might consider purchasing the necessary parts separately
from an online genuine Honda parts dealer, such as
www.slhonda.com or www.hondaautomotiveparts.com . Of course,
some shops already charge lower prices for parts used in
work they do for you.

Dealer prices tend to be a bit higher; independent import
car shops, lower.

You should call around to get quotes.

"twfsa" <twfuksa@qwest.net> wrote
> What should I expect to pay for timing belt and water pump
> replacment on 98 civic.




Elle 06-13-2006 08:50 AM

Re: Timing belt Replacement
 
Around $450 to $800.

Make sure new shaft oil seals on the camshaft and crankshaft
are included. Also, if the tensioner was not changed at the
last TB change, consider having it changed, too.

Since the water pump comes off during this job, some coolant
will drain. If an independent import car shop does the job,
make sure it tops off the cooling system with only OEM
coolant at the end of the job. If the shop says it doesn't
have this, buy a gallon jug at the dealer for around $15 and
provide it to the shop.

You might consider purchasing the necessary parts separately
from an online genuine Honda parts dealer, such as
www.slhonda.com or www.hondaautomotiveparts.com . Of course,
some shops already charge lower prices for parts used in
work they do for you.

Dealer prices tend to be a bit higher; independent import
car shops, lower.

You should call around to get quotes.

"twfsa" <twfuksa@qwest.net> wrote
> What should I expect to pay for timing belt and water pump
> replacment on 98 civic.




jim beam 06-13-2006 09:15 AM

Re: Timing belt Replacement
 
Elle wrote:
> Around $450 to $800.
>
> Make sure new shaft oil seals on the camshaft and crankshaft
> are included.


that's commonly recommended by people trying to sell you stuff, but not
great advice. there's considerable chance of damage to the sealing
surfaces in removing a seal without complete disassembly, something that
is /not/ happening in this situation. decent oil has seal conditioner
that stops any rotating seal leaks completely - i know this from
experience. and besides, it's completely illogical to change the low
velocity seals [the small diameter ones on the pulley end of the crank
and the cam] just because they're easily accessible when /not/ changing
the higher velocity seal on the output end of the crank, just because
its hard to get at!!!

my advice is leave the seals well alone and use a good quality oil like
castrol gtx. gtx has dried my 17-year old driveway sabotage machine up
completely and she doesn't drip a drop any more.

> Also, if the tensioner was not changed at the
> last TB change, consider having it changed, too.
>
> Since the water pump comes off during this job, some coolant
> will drain. If an independent import car shop does the job,
> make sure it tops off the cooling system with only OEM
> coolant at the end of the job. If the shop says it doesn't
> have this, buy a gallon jug at the dealer for around $15 and
> provide it to the shop.
>
> You might consider purchasing the necessary parts separately
> from an online genuine Honda parts dealer, such as
> www.slhonda.com or www.hondaautomotiveparts.com . Of course,
> some shops already charge lower prices for parts used in
> work they do for you.
>
> Dealer prices tend to be a bit higher; independent import
> car shops, lower.
>
> You should call around to get quotes.
>
> "twfsa" <twfuksa@qwest.net> wrote
>
>>What should I expect to pay for timing belt and water pump
>>replacment on 98 civic.

>
>
>


jim beam 06-13-2006 09:15 AM

Re: Timing belt Replacement
 
Elle wrote:
> Around $450 to $800.
>
> Make sure new shaft oil seals on the camshaft and crankshaft
> are included.


that's commonly recommended by people trying to sell you stuff, but not
great advice. there's considerable chance of damage to the sealing
surfaces in removing a seal without complete disassembly, something that
is /not/ happening in this situation. decent oil has seal conditioner
that stops any rotating seal leaks completely - i know this from
experience. and besides, it's completely illogical to change the low
velocity seals [the small diameter ones on the pulley end of the crank
and the cam] just because they're easily accessible when /not/ changing
the higher velocity seal on the output end of the crank, just because
its hard to get at!!!

my advice is leave the seals well alone and use a good quality oil like
castrol gtx. gtx has dried my 17-year old driveway sabotage machine up
completely and she doesn't drip a drop any more.

> Also, if the tensioner was not changed at the
> last TB change, consider having it changed, too.
>
> Since the water pump comes off during this job, some coolant
> will drain. If an independent import car shop does the job,
> make sure it tops off the cooling system with only OEM
> coolant at the end of the job. If the shop says it doesn't
> have this, buy a gallon jug at the dealer for around $15 and
> provide it to the shop.
>
> You might consider purchasing the necessary parts separately
> from an online genuine Honda parts dealer, such as
> www.slhonda.com or www.hondaautomotiveparts.com . Of course,
> some shops already charge lower prices for parts used in
> work they do for you.
>
> Dealer prices tend to be a bit higher; independent import
> car shops, lower.
>
> You should call around to get quotes.
>
> "twfsa" <twfuksa@qwest.net> wrote
>
>>What should I expect to pay for timing belt and water pump
>>replacment on 98 civic.

>
>
>


jim beam 06-13-2006 09:15 AM

Re: Timing belt Replacement
 
Elle wrote:
> Around $450 to $800.
>
> Make sure new shaft oil seals on the camshaft and crankshaft
> are included.


that's commonly recommended by people trying to sell you stuff, but not
great advice. there's considerable chance of damage to the sealing
surfaces in removing a seal without complete disassembly, something that
is /not/ happening in this situation. decent oil has seal conditioner
that stops any rotating seal leaks completely - i know this from
experience. and besides, it's completely illogical to change the low
velocity seals [the small diameter ones on the pulley end of the crank
and the cam] just because they're easily accessible when /not/ changing
the higher velocity seal on the output end of the crank, just because
its hard to get at!!!

my advice is leave the seals well alone and use a good quality oil like
castrol gtx. gtx has dried my 17-year old driveway sabotage machine up
completely and she doesn't drip a drop any more.

> Also, if the tensioner was not changed at the
> last TB change, consider having it changed, too.
>
> Since the water pump comes off during this job, some coolant
> will drain. If an independent import car shop does the job,
> make sure it tops off the cooling system with only OEM
> coolant at the end of the job. If the shop says it doesn't
> have this, buy a gallon jug at the dealer for around $15 and
> provide it to the shop.
>
> You might consider purchasing the necessary parts separately
> from an online genuine Honda parts dealer, such as
> www.slhonda.com or www.hondaautomotiveparts.com . Of course,
> some shops already charge lower prices for parts used in
> work they do for you.
>
> Dealer prices tend to be a bit higher; independent import
> car shops, lower.
>
> You should call around to get quotes.
>
> "twfsa" <twfuksa@qwest.net> wrote
>
>>What should I expect to pay for timing belt and water pump
>>replacment on 98 civic.

>
>
>



All times are GMT -4. The time now is 01:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06398 seconds with 5 queries