Valve Cover Torque
The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
for the four nuts holding down the cover. Thanks |
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net... > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks 10N-m, or 7.2 ft.lb |
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net... > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks 10N-m, or 7.2 ft.lb |
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net... > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks 10N-m, or 7.2 ft.lb |
Re: Valve Cover Torque
"Redwood" <mhollandsprint@earthlink.net> wrote in message news:4szmb.2301$RQ1.5@newsread3.news.pas.earthlink .net... > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks 10N-m, or 7.2 ft.lb |
Re: Valve Cover Torque
Redwood wrote:
> > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks ----------- On our '95 Odyssey (you didn't mention what kind of vehicle you've got) you tighten the nuts until they stop, as I recall, because there's shoulders below the threads. It all fits so precisely there's no torqueing or re-torqueing involved. 'Curly' -------------- |
Re: Valve Cover Torque
Redwood wrote:
> > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks ----------- On our '95 Odyssey (you didn't mention what kind of vehicle you've got) you tighten the nuts until they stop, as I recall, because there's shoulders below the threads. It all fits so precisely there's no torqueing or re-torqueing involved. 'Curly' -------------- |
Re: Valve Cover Torque
Redwood wrote:
> > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks ----------- On our '95 Odyssey (you didn't mention what kind of vehicle you've got) you tighten the nuts until they stop, as I recall, because there's shoulders below the threads. It all fits so precisely there's no torqueing or re-torqueing involved. 'Curly' -------------- |
Re: Valve Cover Torque
Redwood wrote:
> > The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec > for the four nuts holding down the cover. > > Thanks ----------- On our '95 Odyssey (you didn't mention what kind of vehicle you've got) you tighten the nuts until they stop, as I recall, because there's shoulders below the threads. It all fits so precisely there's no torqueing or re-torqueing involved. 'Curly' -------------- |
All times are GMT -4. The time now is 02:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands