GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   Windshield wiper fluid not coming out (https://www.gtcarz.com/honda-mailing-list-327/windshield-wiper-fluid-not-coming-out-290388/)

adf 02-14-2006 09:54 AM

Windshield wiper fluid not coming out
 
Car: 1991 Honda Accord Wagon

Problem: When I try to get the winshield wiper fluid nothing comes out.
Howeve I can hear the mother come on. The read one works well. I also
noticed that when I try to fill the wiper fluids just before it fills up it
starts leaking and starts pouring on the ground.

Can anyone tell me what is the problem and how I can remedy this.

Thanks in advance.

Dave



Jim Yanik 02-14-2006 02:57 PM

Re: Windshield wiper fluid not coming out
 
"adf" <afsd> wrote in
news:9e40b$43f1ed1d$44a723bb$5589@msgid.meganewsse rvers.com:

> Car: 1991 Honda Accord Wagon
>
> Problem: When I try to get the winshield wiper fluid nothing comes
> out. Howeve I can hear the mother come on. The read one works well. I
> also noticed that when I try to fill the wiper fluids just before it
> fills up it starts leaking and starts pouring on the ground.
>
> Can anyone tell me what is the problem and how I can remedy this.
>
> Thanks in advance.
>
> Dave
>
>
>


You could have clogged or split tubing or a nozzle clog;use a fine needle
to clear the nozzle. Pop Mechanics a few issues ago had an article about
servicing washers.They also suggested backflushing the tubing from the
nozzle end.

--
Jim Yanik
jyanik
at
kua.net

N.E.Ohio Bob 02-15-2006 08:28 AM

Re: Windshield wiper fluid not coming out
 
adf wrote:
> Car: 1991 Honda Accord Wagon
>
> Problem: When I try to get the winshield wiper fluid nothing comes out.
> Howeve I can hear the mother come on. The read one works well. I also
> noticed that when I try to fill the wiper fluids just before it fills up it
> starts leaking and starts pouring on the ground.
>
> Can anyone tell me what is the problem and how I can remedy this.
>
> Thanks in advance.
>
> Dave
>
>

The fill tube is pulled loose from the reservoir, causing the leak near
the top. May have to move the cruse control unit to see how to push it
back together.
Pull the tube off the nozzle under the hood. If juice comes out there,
get a fine needle or pin and clean and re-aim the nozzles. bob


All times are GMT -4. The time now is 08:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05610 seconds with 5 queries