Wiring pinout for ELD,
I need the pin out for the Electronic Load Detector.
I have a Canadian Honda Civic (1996) that has no ELD. I have swapped in a JDM B18C1 engine (Acura Integra GSR) and now my ECU has a light on for ELD (Code 20) I have purchased another fuse box from eBay that now has the ELD connector however I do not know the order of the pins for inputs and output. 1 wire is 12Volt + (Black/White) 1 Wire is Ground + (Black) 1 Wire is 5 Volt Output. (Red/Green) Does anyone know the order of the wires? Anyone in the USA should be able to just look at the bottom of there fuse box. I'm sure someone in a shop has a harness lying around they can look at. |
Re: Wiring pinout for ELD,
In article <1115921241.589751.35520@o13g2000cwo.googlegroups. com>,
google@canadiangeek.net wrote: > I need the pin out for the Electronic Load Detector. > > I have a Canadian Honda Civic (1996) that has no ELD. I have swapped > in a JDM B18C1 engine (Acura Integra GSR) and now my ECU has a light on > for ELD (Code 20) > > I have purchased another fuse box from eBay that now has the ELD > connector however I do not know the order of the pins for inputs and > output. > > 1 wire is 12Volt + (Black/White) > 1 Wire is Ground + (Black) > 1 Wire is 5 Volt Output. (Red/Green) > > Does anyone know the order of the wires? > > Anyone in the USA should be able to just look at the bottom of there > fuse box. I'm sure someone in a shop has a harness lying around they > can look at. I have the wire harness pinouts: IG1 Black/White Pin 1 ELD GND Black Pin 2 ELD EL Green/Red Pin 3 ELD -> Pin 16 ECM/PCM Connector D ELD 3P harness connector (C354): ----- ----|---|---- | 1 | 2 | 3 | ------------- I G E G N L 1 D I can't find a picture of the ELD in the repair manual so I don't know what to do if it has solder lugs or a non-standard jack on it. |
Re: Wiring pinout for ELD,
In article <1115921241.589751.35520@o13g2000cwo.googlegroups. com>,
google@canadiangeek.net wrote: > I need the pin out for the Electronic Load Detector. > > I have a Canadian Honda Civic (1996) that has no ELD. I have swapped > in a JDM B18C1 engine (Acura Integra GSR) and now my ECU has a light on > for ELD (Code 20) > > I have purchased another fuse box from eBay that now has the ELD > connector however I do not know the order of the pins for inputs and > output. > > 1 wire is 12Volt + (Black/White) > 1 Wire is Ground + (Black) > 1 Wire is 5 Volt Output. (Red/Green) > > Does anyone know the order of the wires? > > Anyone in the USA should be able to just look at the bottom of there > fuse box. I'm sure someone in a shop has a harness lying around they > can look at. I have the wire harness pinouts: IG1 Black/White Pin 1 ELD GND Black Pin 2 ELD EL Green/Red Pin 3 ELD -> Pin 16 ECM/PCM Connector D ELD 3P harness connector (C354): ----- ----|---|---- | 1 | 2 | 3 | ------------- I G E G N L 1 D I can't find a picture of the ELD in the repair manual so I don't know what to do if it has solder lugs or a non-standard jack on it. |
Re: Wiring pinout for ELD,
Thanks. I will give this a shot today.
it has a connector that is supposed to fit however I dont have the connector so I will just use the leads as solder lugs. |
Re: Wiring pinout for ELD,
Thanks. I will give this a shot today.
it has a connector that is supposed to fit however I dont have the connector so I will just use the leads as solder lugs. |
All times are GMT -4. The time now is 04:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands