1989 Excel 5th Gear HELP!!!!
 

Anyone know where I can get a Vacuum Diagram for this beast? Replaced
clutch, and Clutch Fork, and afterwards fifth gear does not work. It goes
into 5th, but feels like it's still in 4th. I'm hoping its just the vacuum
lines I have hooked up wrong. Anyone know how I can get this fixed?

Re: 1989 Excel 5th Gear HELP!!!!
 

"John Smith" <me@here.net> wrote in message
news:vg64td1a2rvc13@corp.supernews.com...
> Anyone know where I can get a Vacuum Diagram for this beast? Anyone
know how I can get this fixed?
>
>

Service manual is available online here
https://dcsonline.hyundaidealer.com/customer/index.jsp

Go to technical info. Should have what you want.

Re: 1989 Excel 5th Gear HELP!!!!
 

Vac lines on a manual? 89? I don't know of any in general.

Only had a problem with my 85 VW Golf when I ran low on trans fluid.
Did not check fluid before going on trip. It was low and 5th blue
out!

Good luck

On Wed, 2 Jul 2003 11:17:41 -0600, "John Smith" <me@here.net> wrote:

> Anyone know where I can get a Vacuum Diagram for this beast? Replaced
>clutch, and Clutch Fork, and afterwards fifth gear does not work. It goes
>into 5th, but feels like it's still in 4th. I'm hoping its just the vacuum
>lines I have hooked up wrong. Anyone know how I can get this fixed?
>

Re: 1989 Excel 5th Gear HELP!!!!
 

"John Smith" <me@here.net> ha scritto nel messaggio
news:vg6hl72q3oi587@corp.supernews.com...
> Ya, 5th gear uses a Vac to engage... Only it's not engaging!

Usually this occours when vacuum switch dont engage (part no. 43868-21501);
it's located by the
select lever, outside gearbox.

Trust_no1

Re: 1989 Excel 5th Gear HELP!!!!
 

Inside the car?

"Trust_no1" <kingforaday@NOSPAMemail.it> wrote in message
news:0YSMa.9343$xK6.244859@news1.tin.it...
>
> "John Smith" <me@here.net> ha scritto nel messaggio
> news:vg6hl72q3oi587@corp.supernews.com...
> > Ya, 5th gear uses a Vac to engage... Only it's not engaging!
>
> Usually this occours when vacuum switch dont engage (part no.
43868-21501);
> it's located by the
> select lever, outside gearbox.
>
> Trust_no1
>
>