1998 Sonata 2.0 - Doing head job found mystery steel tube under car
 

hi, I'm doing a head job on a 1998 Sonata 2.0 and I found a steel tube
laying under car on shop floor, about 3 inches long and 1/4 inch thick
with a pinhole orifice on one side and open on other side. Looks almost
like it's for a vacuum line. concerned it might be for oil flow because
head is back on engine but I still have to hook every thing up. Any
ideas out there.... tomorrow I will try to get a good pic of it and
attach it to this thread unless someone knows for sure what it is
thanks guys joey m...............


--
JOEY M
Message Origin: TRAVEL.com

Re: 1998 Sonata 2.0 - Doing head job found mystery steel tube undercar
 

On Mar 14, 8:06 pm, JOEY M <JOEY.M.3p2...@no-mx.forums.travel.com>
wrote:
> hi, I'm doing a head job on a 1998 Sonata 2.0 and I found a steel tube
> laying under car on shop floor, about 3 inches long and 1/4 inch thick
> with a pinhole orifice on one side and open on other side. Looks almost
> like it's for a vacuum line. concerned it might be for oil flow because
> head is back on engine but I still have to hook every thing up. Any
> ideas out there.... tomorrow I will try to get a good pic of it and
> attach it to this thread unless someone knows for sure what it is
> thanks guys joey m...............
>
> --
> JOEY M
> Message Origin: TRAVEL.com

EGR vacuum tube?