2001 santafe rear wiper removal
What is the easiest way to get to the rear wiper motor?
thanks zenox |
Re: 2001 santafe rear wiper removal
You'll need to remove the trim cover from the inside of the liftgate. If
you're removing the motor, you'll also need to remove the wiper arm, remove the plastic cover over the shaft, and remove the retaining nut there. |
Re: 2001 santafe rear wiper removal
You'll need to remove the trim cover from the inside of the liftgate. If
you're removing the motor, you'll also need to remove the wiper arm, remove the plastic cover over the shaft, and remove the retaining nut there. |
Re: 2001 santafe rear wiper removal
You'll need to remove the trim cover from the inside of the liftgate. If
you're removing the motor, you'll also need to remove the wiper arm, remove the plastic cover over the shaft, and remove the retaining nut there. |
Re: 2001 santafe rear wiper removal
tks again tech.
"hyundaitech" <notpublic@not.public.com> wrote in message news:88e0b2956e5583342b095e969a99f5f6@localhost.ta lkaboutautos.com... > You'll need to remove the trim cover from the inside of the liftgate. If > you're removing the motor, you'll also need to remove the wiper arm, > remove the plastic cover over the shaft, and remove the retaining nut > there. > |
Re: 2001 santafe rear wiper removal
tks again tech.
"hyundaitech" <notpublic@not.public.com> wrote in message news:88e0b2956e5583342b095e969a99f5f6@localhost.ta lkaboutautos.com... > You'll need to remove the trim cover from the inside of the liftgate. If > you're removing the motor, you'll also need to remove the wiper arm, > remove the plastic cover over the shaft, and remove the retaining nut > there. > |
Re: 2001 santafe rear wiper removal
tks again tech.
"hyundaitech" <notpublic@not.public.com> wrote in message news:88e0b2956e5583342b095e969a99f5f6@localhost.ta lkaboutautos.com... > You'll need to remove the trim cover from the inside of the liftgate. If > you're removing the motor, you'll also need to remove the wiper arm, > remove the plastic cover over the shaft, and remove the retaining nut > there. > |
All times are GMT -4. The time now is 01:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands