2004 Hyundai Elantra GT - Piston in Caliper for rear brakes will not compress
 

I own a 2004 Hyundai Elantra GT. I was changing my rear brake pads
and could not get the piston to compress. I tried using a C-Clamp and
it would'nt budge. Do I need a special tool, is there a trick, what
am I missing?

Re: 2004 Hyundai Elantra GT - Piston in Caliper for rear brakes will not compress
 

ericvallejo5000@hotmail.com wrote in news:1185283577.301587.158220@
57g2000hsv.googlegroups.com:

> I own a 2004 Hyundai Elantra GT. I was changing my rear brake pads
> and could not get the piston to compress. I tried using a C-Clamp and
> it would'nt budge. Do I need a special tool, is there a trick, what
> am I missing?

I'm speaking from experience on other cars, but I believe the rear calipers
have pistons that need to be screwed in. There may or may not be a special
tool to do this on the Elantra. I'm sure HT will be along at some point to
give the exact answer.

Eric

Re: 2004 Hyundai Elantra GT - Piston in Caliper for rear brakes
 

You're exactly correct, Eric. There's a special tool to screw in the
caliper pistion. See the post by Deck below.

Re: 2004 Hyundai Elantra GT - Piston in Caliper for rear brakes willnot compress
 

The below is HT's reply to an 03 Elantra posted on 7-19

"You won't need a special tool for the front.

The calipers that need to have the piston screwed back in are the ones
that have the parking brake assembly as part of the caliper. If you have
rear disc, you'll find such calipers on the rear of your car. I've heard
of people screwing them in without a special tool, but trust me, you'll be
much happier with the tool. There are a couple different types. Your
local Sears or parts supplier should be able to show you at least one type
of tool for this."


ericvallejo5000@hotmail.com wrote:
> I own a 2004 Hyundai Elantra GT. I was changing my rear brake pads
> and could not get the piston to compress. I tried using a C-Clamp and
> it would'nt budge. Do I need a special tool, is there a trick, what
> am I missing?
>

Re: 2004 Hyundai Elantra GT - Piston in Caliper for rear brakes willnot compress
 

ARGH ! I'm too slow

jp103 wrote:
> The below is HT's reply to an 03 Elantra posted on 7-19
>
> "You won't need a special tool for the front.
>
> The calipers that need to have the piston screwed back in are the ones
> that have the parking brake assembly as part of the caliper. If you have
> rear disc, you'll find such calipers on the rear of your car. I've heard
> of people screwing them in without a special tool, but trust me, you'll be
> much happier with the tool. There are a couple different types. Your
> local Sears or parts supplier should be able to show you at least one type
> of tool for this."
>
>
> ericvallejo5000@hotmail.com wrote:
>> I own a 2004 Hyundai Elantra GT. I was changing my rear brake pads
>> and could not get the piston to compress. I tried using a C-Clamp and
>> it would'nt budge. Do I need a special tool, is there a trick, what
>> am I missing?
>>