94 Excell, valve tap
 

My daughters 94 excell (42,000 miles) has a valve that started tapping
today. (fairly loud) All fluids are normal. It runs great. I'm going to
remove the valve cover and start adjusting the valves. Is this O.K.? Is
there something I should know before doing this.
Rob

Re: 94 Excell, valve tap
 

Rob wrote:
> My daughters 94 excell (42,000 miles) has a valve that started tapping
> today. (fairly loud) All fluids are normal. It runs great. I'm going to
> remove the valve cover and start adjusting the valves. Is this O.K.? Is
> there something I should know before doing this.
> Rob
>
If it's one valve and it's fairly loud, it may be a broken valve spring.
I've had that happen on a couple of cars, so make sure you check carefully.

Re: 94 Excell, valve tap
 

If you're comfortable adjusting valves, there's absolutely nothing you
won't expect there.

In some cases, one of the bolts holding a rocker shaft down comes loose.
The rocker shafts sometimes break. The threads in the hole are sometimes
damaged. I've had to replace many rocker shafts and helicoil several
heads.

Re: 94 Excell, valve tap
 

"hyundaitech" <notpublic@not.public.com> wrote in message
news:67430d6dbcdfab9e997e039a01d9f596@localhost.ta lkaboutautos.com...
> If you're comfortable adjusting valves, there's absolutely nothing you
> won't expect there.
>
> In some cases, one of the bolts holding a rocker shaft down comes loose.
> The rocker shafts sometimes break. The threads in the hole are sometimes
> damaged. I've had to replace many rocker shafts and helicoil several
> heads.
>

That was EXACTLY what it was. The rocker shaft was loose on one side. I
tightened the bolt and all is well. Of course I had already commenced on
readjusting the valves before I noticed the loose bolt. I got away cheap
this time.

Rob