99 Accent
 

Hey Hyuntech,

is it easy to install a new seat belt latch in our car?
I ordered a new one, just wondering if there any tips to the procedure..
Do I have to take the seat out?
The old one wont unlock at all now

Re: 99 Accent
 

I don't believe you need to remove the seat. I think it's possible (but
very annoying) to do without removing the console or seat. It's probably
easier to unbolt the seat, though. There are only four 14mm bolts/nuts
holding it in place.

Re: 99 Accent
 

I don't believe you need to remove the seat. I think it's possible (but
very annoying) to do without removing the console or seat. It's probably
easier to unbolt the seat, though. There are only four 14mm bolts/nuts
holding it in place.

Re: 99 Accent
 

I don't believe you need to remove the seat. I think it's possible (but
very annoying) to do without removing the console or seat. It's probably
easier to unbolt the seat, though. There are only four 14mm bolts/nuts
holding it in place.

Re: 99 Accent
 

ill just remove te seat, easier and less swearing =-)
"hyundaitech" <notpublic@not.public.com> wrote in message
news:3834d883881d7c78a5f5aaf8b95a1cdf@localhost.ta lkaboutautos.com...
>I don't believe you need to remove the seat. I think it's possible (but
> very annoying) to do without removing the console or seat. It's probably
> easier to unbolt the seat, though. There are only four 14mm bolts/nuts
> holding it in place.
>

Re: 99 Accent
 

ill just remove te seat, easier and less swearing =-)
"hyundaitech" <notpublic@not.public.com> wrote in message
news:3834d883881d7c78a5f5aaf8b95a1cdf@localhost.ta lkaboutautos.com...
>I don't believe you need to remove the seat. I think it's possible (but
> very annoying) to do without removing the console or seat. It's probably
> easier to unbolt the seat, though. There are only four 14mm bolts/nuts
> holding it in place.
>

Re: 99 Accent
 

ill just remove te seat, easier and less swearing =-)
"hyundaitech" <notpublic@not.public.com> wrote in message
news:3834d883881d7c78a5f5aaf8b95a1cdf@localhost.ta lkaboutautos.com...
>I don't believe you need to remove the seat. I think it's possible (but
> very annoying) to do without removing the console or seat. It's probably
> easier to unbolt the seat, though. There are only four 14mm bolts/nuts
> holding it in place.
>