Attn HyundaiTech ; Why wont the Wheel Speed Sensor come out ?!
10-05-2009, 01:45 PM
#1
Guest
Posts: n/a
Attn HyundaiTech ; Why wont the Wheel Speed Sensor come out ?!
I removed the hold down bolt..but the thing wont budge. Ive tried
whacking it a few times to loosen it along with a screwdriver to dig
it out...but its stuck in its hole. You were right...a Mouse had
eaten thru the wires starting right at the sensor top ...so they cant
be reconnected. SHould i try putting a small pipe wrench on it and
twisting it ? Whats the trick to get it out ? Thanks.
whacking it a few times to loosen it along with a screwdriver to dig
it out...but its stuck in its hole. You were right...a Mouse had
eaten thru the wires starting right at the sensor top ...so they cant
be reconnected. SHould i try putting a small pipe wrench on it and
twisting it ? Whats the trick to get it out ? Thanks.
10-05-2009, 10:52 PM
#2
Guest
Posts: n/a
Re: Attn HyundaiTech ; Why wont the Wheel Speed Sensor come out ?!
On Oct 5, 1:45 pm, "IlBeBa...@gmail.com" <ilbeba...@gmail.com> wrote:
> I removed the hold down bolt..but the thing wont budge. Ive tried
> whacking it a few times to loosen it along with a screwdriver to dig
> it out...but its stuck in its hole. You were right...a Mouse had
> eaten thru the wires starting right at the sensor top ...so they cant
> be reconnected. SHould i try putting a small pipe wrench on it and
> twisting it ? Whats the trick to get it out ? Thanks.
The last couple of these I've removed I've had to break apart. I
think the last one was on a '99-'05 Sonata, and if my memory is
correct, I unbolted the ball joint and hammered it out from the back
side using an extension. On the Santa Fe, it may be easier to take
the strut and tie rod end loose from the knuckle.
> I removed the hold down bolt..but the thing wont budge. Ive tried
> whacking it a few times to loosen it along with a screwdriver to dig
> it out...but its stuck in its hole. You were right...a Mouse had
> eaten thru the wires starting right at the sensor top ...so they cant
> be reconnected. SHould i try putting a small pipe wrench on it and
> twisting it ? Whats the trick to get it out ? Thanks.
The last couple of these I've removed I've had to break apart. I
think the last one was on a '99-'05 Sonata, and if my memory is
correct, I unbolted the ball joint and hammered it out from the back
side using an extension. On the Santa Fe, it may be easier to take
the strut and tie rod end loose from the knuckle.
10-06-2009, 10:32 AM
#3
Guest
Posts: n/a
Re: Attn HyundaiTech ; Why wont the Wheel Speed Sensor come out ?!
On Oct 5, 9:52 pm, hyundaitech <hyundaim...@gmail.com> wrote:
> On Oct 5, 1:45 pm, "IlBeBa...@gmail.com" <ilbeba...@gmail.com> wrote:
>
> > I removed the hold down bolt..but the thing wont budge. Ive tried
> > whacking it a few times to loosen it along with a screwdriver to dig
> > it out...but its stuck in its hole. You were right...a Mouse had
> > eaten thru the wires starting right at the sensor top ...so they cant
> > be reconnected. SHould i try putting a small pipe wrench on it and
> > twisting it ? Whats the trick to get it out ? Thanks.
>
> The last couple of these I've removed I've had to break apart. I
> think the last one was on a '99-'05 Sonata, and if my memory is
> correct, I unbolted the ball joint and hammered it out from the back
> side using an extension. On the Santa Fe, it may be easier to take
> the strut and tie rod end loose from the knuckle.
Thanks.
> On Oct 5, 1:45 pm, "IlBeBa...@gmail.com" <ilbeba...@gmail.com> wrote:
>
> > I removed the hold down bolt..but the thing wont budge. Ive tried
> > whacking it a few times to loosen it along with a screwdriver to dig
> > it out...but its stuck in its hole. You were right...a Mouse had
> > eaten thru the wires starting right at the sensor top ...so they cant
> > be reconnected. SHould i try putting a small pipe wrench on it and
> > twisting it ? Whats the trick to get it out ? Thanks.
>
> The last couple of these I've removed I've had to break apart. I
> think the last one was on a '99-'05 Sonata, and if my memory is
> correct, I unbolted the ball joint and hammered it out from the back
> side using an extension. On the Santa Fe, it may be easier to take
> the strut and tie rod end loose from the knuckle.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Thee Chicago Wolf
Hyundai Mailing List
1
09-06-2007 12:26 PM
nothermark
Hyundai Mailing List
12
05-19-2006 11:45 AM
nothermark
Hyundai Mailing List
0
05-17-2006 07:29 AM
Dave in Lake Villa
Hyundai Mailing List
5
08-31-2005 03:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
