Blinker problems.. please help!
 

I have a 2003 hyundai Tiburon GT my blinker just turned on and wont
turn off. it’s not blinking at all, just is stuck on.... Does anyone
know what is going on or how to fix it?

--
Posted at author's request, using moderated http://www.AutoBoardz.com interface
Thread archive: http://www.AutoBoardz.com/Blinker-pr...ict248343.html

Re: Blinker problems.. please help!
 

"jenn" <none@000.com> wrote in message
news:1207543_5e7de871a995d3b241d243ee5ea300d4@auto boardz.com...
>I have a 2003 hyundai Tiburon GT my blinker just turned on and wont
> turn off. it's not blinking at all, just is stuck on.... Does anyone
> know what is going on or how to fix it?
>

Walk around your car and find the burned out bulb.

--

-Mike-
mmarlowREMOVE@alltel.net

Re: Blinker problems.. please help!
 

Presuming the lamp stays on no matter what the turn signal lever position,
you probably need a new BCM (Body Control Module).

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html

Re: Blinker problems.. please help!
 

hello i am a service manager and your problem is vehicle requires new
bcm
body control module and aprox 700 .00

"jenn" wrote:
> I have a 2003 hyundai Tiburon GT my blinker just turned on and
> wont turn off. it's not blinking at all, just is stuck on....
> Does anyone know what is going on or how to fix it?

--
Posted at author's request, using moderated http://www.AutoBoardz.com interface
Thread archive: http://www.AutoBoardz.com/Blinker-pr...ict248343.html

Re: Blinker problems.. please help!
 

Check simple things first like all the bulbs and connections. Not sure if
there is any software in the "bcm" but disconnect/reconnect battery to
reset it. Then get one from a wreckers if you can. Then suppliers of parts
from Internet based parts importers, not dealers. If you do have to replace
the module at $700 I suppose you,ll have to , to keep car on the road. If I
did have to pay $700 for a blinker module I,d be kicking up a stink in every
media I could to make these companies charge reasonable prices for their
parts.
Best of luck