Coolant Change
I have a 2004 Santa Fe 3.5 6 cyl. I am looking to change the coolant myself
this time. Looking on line I found out where the drain is and found it on the car. There is a hole big enough in a crossmember to get a phillips screwdriver thru to the slotted drain plug. I don't want to pull the belly pan off, and read that it was not necessary. Has anyone done a change on the 3.5 ? if so where does it drain to, is there a drain hose? If not it looks like it would drain on top of the crossmember and all over the place ! The only access is thru a hole just big enough for a screwdriver to fit thru and if the drain plug comes off then the only way of getting it back on is removing the belly pan (Skid Plate) !!!!!! Striker |
Re: Coolant Change
> If not it looks
> like it would drain on top of the crossmember and all over the place ! The > only access is thru a hole just big enough for a screwdriver to fit thru and > if the drain plug comes off then the only way of getting it back on is > removing the belly pan (Skid Plate) !!!!!! This is all accurate. |
Re: Coolant Change
On Jul 25, 3:02 pm, "Striker" <oll...@copper.net> wrote:
> I have a 2004 Santa Fe 3.5 6 cyl. I am looking to change the coolant myself > this time. Looking on line I found out where the drain is and found it oniv > Whythe car. There is a hole big enough in a crossmember to get a phillips > screwdriver thru to the slotted drain plug. I don't want to pull the belly > pan off, and read that it was not necessary. Has anyone done a change on the > 3.5 ? if so where does it drain to, is there a drain hose? If not it looks > like it would drain on top of the crossmember and all over the place ! The > only access is thru a hole just big enough for a screwdriver to fit thru and > if the drain plug comes off then the only way of getting it back on is > removing the belly pan (Skid Plate) !!!!!! > > Striker Why dont you just use the tried and true Prestone method of cleaning/ flushing your cooling system ? Buy the package with the flushing Tees in along with hose clamps , and get a bottle of Prestone Cleaner . You simply cut the Tee into the heater inlet hose and you now have a permanent place to flush the system with your garden hose. Its backflushed and all the junk comes out of your radiator inlet. Simple, very effective, no headaches, been around for years. |
All times are GMT -4. The time now is 08:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands