GTcarz - Automotive forums for cars & trucks.

- Hyundai Mailing List (https://www.gtcarz.com/hyundai-mailing-list-137/)

- - drive axles (https://www.gtcarz.com/hyundai-mailing-list-137/drive-axles-49693/)

I just had brand new drive axles installed in my XG350L and it is now
clunk clunk clunking around left turns and making a severe clunk when
I back up with the wheel turned left.

Would a brand new axle have a bad CV joint?

On Fri, 18 Jun 2004 02:09:04 GMT, KR <royalty2009@yahoo.com> wrote:

>I just had brand new drive axles installed in my XG350L and it is now
>clunk clunk clunking around left turns and making a severe clunk when
>I back up with the wheel turned left.
>
>Would a brand new axle have a bad CV joint?

It's possible that the joint was damaged during installation. It is
also possible that something else was not tightened properly.

I would take it back to the shop and have them look it over. It is
very likely that more damage will occur if you continue to drive it.