Elantra A/T 2nd to 3rd over revs
 

A problem i have noticed recently is that when my automatic trans shifts
from 2nd to 3rd it seems to over rev before making the change and isn't
smooth like all other gear changes.

About a month ago i had the pulse genrator changed as i was experiencing a
shift down into 3rd (fail safe) from overdrive. This problem went gone away
after the sensor was replaced ($200cdn part).

Any advice on possible cause to this and what may be needed to solve it?

I don't have any codes as i've not had it to the dealer yet and the light
i have on right now refers to a purge valve needing to be replaced.

Re: Elantra A/T 2nd to 3rd over revs
 

There is a reprogram available for '01 and '02 Elantras with this
condition.

Re: Elantra A/T 2nd to 3rd over revs
 

Thanks again hyundaitech!

Re: Elantra A/T 2nd to 3rd over revs
 

"hyundaitech" <notpublic@not.public.com> wrote in
news:9da02759b051e59642505d0b54afa445@localhost.ta lkaboutautos.com:

> There is a reprogram available for '01 and '02 Elantras with this
> condition.
>

I've got this same problem on my '03. It seems to have just developed over
the last few weeks. Would this reprogram apply as well?

Thanks.

Re: Elantra A/T 2nd to 3rd over revs
 

The reprogram I found doesn't apply to the '03. It should already have the
updated software from the factory. You may have a more serious issue. You
may wish to take it in and have it checked.

You could try disconnecting the battery and seeing if it goes away after
the transmission computer relearns. I'd doubt it, but it may be easier
than going to the dealer first. The downside of this is that it would
erase any stored diagnostic info.