Engine Light '01 Elantra
I wanted to see if anyone may be able to diagnose the problem I am
having with my 2001 Elantra. Sometimes when I accelerate, typically after I first start the car, the car will seem to not be able to shift out of 3rd gear(it's an automatic), then the car kinda jolts and the engine light comes on. After this point the car accelerates slowly. When the vehicle is shut off for a a short time, maybe an hour or less, the car is fine. Usually the car seems to drive like nothing is wrong this just happens intermittedly. Seems to occur also when I drive then turn it off for a short time then restart the car and drive again. When I take it into the shop and tell them about it they can't tell me what the problem is, or replicate the problem, and without the engine light being on they can't run the error codes. Another related problem I had was that about a year ago when I started the car the engine light would be on right from when I started the car producing the same issues with acceleration, but again the shop could not diagnose this or replicate this. This does not happen any more. I'd appreciate any suggestions on what could be causing this problem. Thanks. |
Re: Engine Light '01 Elantra
You need to find another shop. There should be an error code stored in the
engine computer (because the lamp came on) and at least one in the trans computer indicating the nature of the problem. The fact that your car jerks and shifts into and stays in 3rd gear means that the transmission computer saw something causing it to put the trans in fail-safe. |
Re: Engine Light '01 Elantra
You need to find another shop. There should be an error code stored in the
engine computer (because the lamp came on) and at least one in the trans computer indicating the nature of the problem. The fact that your car jerks and shifts into and stays in 3rd gear means that the transmission computer saw something causing it to put the trans in fail-safe. |
Re: Engine Light '01 Elantra
You need to find another shop. There should be an error code stored in the
engine computer (because the lamp came on) and at least one in the trans computer indicating the nature of the problem. The fact that your car jerks and shifts into and stays in 3rd gear means that the transmission computer saw something causing it to put the trans in fail-safe. |
Re: Engine Light '01 Elantra
Thanks for the info, it's actually in the shop now cause the engine
light is staying on, guessing it's an engine problem. On Mon, 03 Apr 2006 13:02:50 -0400, "hyundaitech" <notpublic@not.public.com> wrote: >You need to find another shop. There should be an error code stored in the >engine computer (because the lamp came on) and at least one in the trans >computer indicating the nature of the problem. The fact that your car >jerks and shifts into and stays in 3rd gear means that the transmission >computer saw something causing it to put the trans in fail-safe. |
Re: Engine Light '01 Elantra
Thanks for the info, it's actually in the shop now cause the engine
light is staying on, guessing it's an engine problem. On Mon, 03 Apr 2006 13:02:50 -0400, "hyundaitech" <notpublic@not.public.com> wrote: >You need to find another shop. There should be an error code stored in the >engine computer (because the lamp came on) and at least one in the trans >computer indicating the nature of the problem. The fact that your car >jerks and shifts into and stays in 3rd gear means that the transmission >computer saw something causing it to put the trans in fail-safe. |
Re: Engine Light '01 Elantra
Thanks for the info, it's actually in the shop now cause the engine
light is staying on, guessing it's an engine problem. On Mon, 03 Apr 2006 13:02:50 -0400, "hyundaitech" <notpublic@not.public.com> wrote: >You need to find another shop. There should be an error code stored in the >engine computer (because the lamp came on) and at least one in the trans >computer indicating the nature of the problem. The fact that your car >jerks and shifts into and stays in 3rd gear means that the transmission >computer saw something causing it to put the trans in fail-safe. |
All times are GMT -4. The time now is 02:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands