How Can I Test a clutch for Slippage?
I'm looking to buy a '06 Elantra Hatchback Limited GT w/ 51K miles on it.
The clutch seems weak. How do I test it for slippage? How much does it cost to replace it? Should I also post this question in another forum? I curently drive a Saturn with 121K miles and the Elantra clutch "feels" the same as the Saturn clutch. |
Re: How Can I Test a clutch for Slippage?
Tom wrote:
> I'm looking to buy a '06 Elantra Hatchback Limited GT w/ 51K miles on it. > The clutch seems weak. How do I test it for slippage? How much does it > cost > to replace it? Should I also post this question in another forum? > > I curently drive a Saturn with 121K miles and the Elantra clutch "feels" > the same as the Saturn clutch. Don't laugh... but I used to drive the car up against something solid like a telephone pole or cement wall and slowly let the clutch out. If its good the engine will stall. If there is slippage the engine will continue to run and you will soon smell the burning. Cost to repair? About $642 to $843. You can check for repair costs at www.repairpal.com Good luck. |
Re: How Can I Test a clutch for Slippage?
"Bob M" <r.mariotti@fdcx.net> wrote in message news:ge8k71$uuk$1@registered.motzarella.org... > Tom wrote: > >> I'm looking to buy a '06 Elantra Hatchback Limited GT w/ 51K miles on it. >> The clutch seems weak. How do I test it for slippage? How much does it >> cost >> to replace it? Should I also post this question in another forum? >> >> I curently drive a Saturn with 121K miles and the Elantra clutch "feels" >> the same as the Saturn clutch. > > Don't laugh... but I used to drive the car up against something solid like > a > telephone pole or cement wall and slowly let the clutch out. If its good > the engine will stall. If there is slippage the engine will continue to > run and you will soon smell the burning. > That's a time honored test of a clutch. Do drive up to that pole slowly though... -- -Mike- mmarlowREMOVE@alltel.net |
Re: How Can I Test a clutch for Slippage?
Tom wrote:
> I'm looking to buy a '06 Elantra Hatchback Limited GT w/ 51K miles on it. > The clutch seems weak. How do I test it for slippage? How much does it cost > to replace it? Should I also post this question in another forum? > > I curently drive a Saturn with 121K miles and the Elantra clutch "feels" the > same as the Saturn clutch. > > What makes you think it is "weak" and what does "weak" mean to you? If it feels the same as your current car, what is your concern? An easy test for slippage is to drive in high gear at 55 MPH and floor the throttle. If the RPM increases quickly with little increase in MPH and then drops again when you let off the throttle, you have slippage. If the RPM increases uniformly with MPH, then all is fine. Matt |
Re: How Can I Test a clutch for Slippage?
Bob M wrote:
> Tom wrote: > >> I'm looking to buy a '06 Elantra Hatchback Limited GT w/ 51K miles on it. >> The clutch seems weak. How do I test it for slippage? How much does it >> cost >> to replace it? Should I also post this question in another forum? >> >> I curently drive a Saturn with 121K miles and the Elantra clutch "feels" >> the same as the Saturn clutch. > > Don't laugh... but I used to drive the car up against something solid like a > telephone pole or cement wall and slowly let the clutch out. If its good > the engine will stall. If there is slippage the engine will continue to > run and you will soon smell the burning. No laughing here. It isn't polite to laugh at stupidity. Matt |
Re: How Can I Test a clutch for Slippage?
Mike Marlow wrote:
> "Bob M" <r.mariotti@fdcx.net> wrote in message > news:ge8k71$uuk$1@registered.motzarella.org... >> Tom wrote: >> >>> I'm looking to buy a '06 Elantra Hatchback Limited GT w/ 51K miles on it. >>> The clutch seems weak. How do I test it for slippage? How much does it >>> cost >>> to replace it? Should I also post this question in another forum? >>> >>> I curently drive a Saturn with 121K miles and the Elantra clutch "feels" >>> the same as the Saturn clutch. >> Don't laugh... but I used to drive the car up against something solid like >> a >> telephone pole or cement wall and slowly let the clutch out. If its good >> the engine will stall. If there is slippage the engine will continue to >> run and you will soon smell the burning. >> > > That's a time honored test of a clutch. Do drive up to that pole slowly > though... Yes, stupidity is timeless... :-) Matt |
Re: How Can I Test a clutch for Slippage?
I've been more aggressive than what Matt suggests if I think there's a
potential problem. Matt's test, abd Bob's, too, are both good tests to tell if you'll need a clutch now. If I think it's likely a clutch will be needed in the near future, I'll drive the car about 20MPH, depress the clutch, shift to third gear, rev the engine to about 3,000 RPM, and release the clutch while the engine is revving. The RPMs should quickly drop to around 1000 (or whatever is appropriate for 20 MPH in third gear-- you can determine this RPM on your test drive). If it doesn't drop quickly to the appropriate RPM, you'll be needing a clutch soon. DO NOT do this test more than once and DO NOT wait a prolonged period to see if the engine will RPM will come down. This test is abusive to the clutch and needs to be kept to the minimum amount of time possible. -- Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/ More information at http://www.talkaboutautos.com/faq.html |
Re: How Can I Test a clutch for Slippage?
hyundaitech wrote:
> I've been more aggressive than what Matt suggests if I think there's a > potential problem. Matt's test, abd Bob's, too, are both good tests to > tell if you'll need a clutch now. > > If I think it's likely a clutch will be needed in the near future, I'll > drive the car about 20MPH, depress the clutch, shift to third gear, rev > the engine to about 3,000 RPM, and release the clutch while the engine is > revving. The RPMs should quickly drop to around 1000 (or whatever is > appropriate for 20 MPH in third gear-- you can determine this RPM on your > test drive). If it doesn't drop quickly to the appropriate RPM, you'll be > needing a clutch soon. > > DO NOT do this test more than once and DO NOT wait a prolonged period to > see if the engine will RPM will come down. This test is abusive to the > clutch and needs to be kept to the minimum amount of time possible. That is my concern with the "pole" test. It is very abusive and really for no good reason. If the clutch doesn't slip under full throttle in high gear (which is when the maximum torque is being transferred to the drive train), what is the worry? Matt |
Re: How Can I Test a clutch for Slippage?
"Voyager" <m.whiting@computer.org> wrote in message news:L84Ok.402$xa2.195@newsfe06.iad... > Tom wrote: >> I'm looking to buy a '06 Elantra Hatchback Limited GT w/ 51K miles on it. >> The clutch seems weak. How do I test it for slippage? How much does it >> cost to replace it? Should I also post this question in another forum? >> >> I curently drive a Saturn with 121K miles and the Elantra clutch "feels" >> the same as the Saturn clutch. > > What makes you think it is "weak" and what does "weak" mean to you? If it > feels the same as your current car, what is your concern? my current car has121k miles of urban driving and the clutch is starting to slip > An easy test for slippage is to drive in high gear at 55 MPH and floor the > throttle. If the RPM increases quickly with little increase in MPH and > then drops again when you let off the throttle, you have slippage. If the > RPM increases uniformly with MPH, then all is fine. > > Matt |
Re: How Can I Test a clutch for Slippage?
"hyundaitech" <notpublic@not.public.com> wrote in message news:7ed9a6fc37248a465f157d0d36fc4693@localhost.ta lkaboutautos.com... > I've been more aggressive than what Matt suggests if I think there's a > potential problem. Matt's test, abd Bob's, too, are both good tests to > tell if you'll need a clutch now. > > If I think it's likely a clutch will be needed in the near future, I'll > drive the car about 20MPH, depress the clutch, shift to third gear, rev > the engine to about 3,000 RPM, and release the clutch while the engine is > revving. The RPMs should quickly drop to around 1000 (or whatever is > appropriate for 20 MPH in third gear-- you can determine this RPM on your > test drive). If it doesn't drop quickly to the appropriate RPM, you'll be > needing a clutch soon. > > DO NOT do this test more than once and DO NOT wait a prolonged period to > see if the engine will RPM will come down. This test is abusive to the > clutch and needs to be kept to the minimum amount of time possible. thanks, i'll try it. > > |
Re: How Can I Test a clutch for Slippage?
If it's slipping under full throttle in high gear, the clutch needs to be
replaced now. The other, more abusive tests do a better job of telling you it'll need to be replaced soon (but not necessarily right away). -- Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/ More information at http://www.talkaboutautos.com/faq.html |
Re: How Can I Test a clutch for Slippage?
hyundaitech wrote:
> If it's slipping under full throttle in high gear, the clutch needs to be > replaced now. The other, more abusive tests do a better job of telling > you it'll need to be replaced soon (but not necessarily right away). If it doesn't need to be replaced now, then I don't want to know about it! :-) Matt |
All times are GMT -4. The time now is 03:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands