How to Reprogram Factory Key Fob after replacing the fob battery?
 

Does anyone know how to reprogram the factory key fob on a 2003 Tib after
replacing the fob battery. I have 2 that are getting flaky after 4 years.

Re: How to Reprogram Factory Key Fob after replacing the fob battery?
 

"DaToteman" <notpublic@notpublic.com> wrote in
news:1M2dncdFPrDIQV7YnZ2dnUVZ_vOlnZ2d@suscom.com:

> Does anyone know how to reprogram the factory key fob on a 2003 Tib
> after replacing the fob battery. I have 2 that are getting flaky after
> 4 years.
>
>
===========
I shouldn't even be getting into this, but I thought the programming was in
the receiver (in the car). The transmission frequency of the fob won't
change just because of a new battery.

Of course, I could be wrong!
Harry

--
Posted via a free Usenet account from http://www.teranews.com

Re: How to Reprogram Factory Key Fob after replacing the fob battery?
 

"Harry Smith" <Harry@execpc.com> wrote in message
news:Xns98CCE9B09AA56BorgHive@66.150.105.47...
> "DaToteman" <notpublic@notpublic.com> wrote in
> news:1M2dncdFPrDIQV7YnZ2dnUVZ_vOlnZ2d@suscom.com:
>
>> Does anyone know how to reprogram the factory key fob on a 2003 Tib
>> after replacing the fob battery. I have 2 that are getting flaky after
>> 4 years.
>>
>>
> ===========
> I shouldn't even be getting into this, but I thought the programming was
> in
> the receiver (in the car). The transmission frequency of the fob won't
> change just because of a new battery.
>
> Of course, I could be wrong!
> Harry

I think you are correct from what I've read.
Faulty signal code registration

Ensure normal door opening/closing by using the door key and register
the code again



1. To store transmitter code, first connect the hi-scan (pro) to the Data
Link Connector (DLC) in driver side crash pad lower panel.
2.. Turn the power on hi-scan (pro) with the ignition switch ON.
3.. Select the vehicle model on hi-scan (pro).
4.. After selecting "CODE SAVING" menu then button "ENTER" key.
5.. Proceed as follow steps and then code saving is completed.
1.. Press [ENTER] key, if you are ready.
2.. Press the transmitter [LOCK] button above 1 second.
3.. If you save transmitter one more, press other transmitter [LOCK]
button above 1 second.
4.. Turn the hi-scan (pro) off, and check the keyless entry system

Re: How to Reprogram Factory Key Fob after replacing the fob battery?
 

Hmmm- perhaps what I what I should have asked for is to resync the fob with
the car. I found some instructions for that on the hmaservice site. But
thanks for the info!

"DaToteman" <notpublic@notpublic.com> wrote in message
news:1M2dncdFPrDIQV7YnZ2dnUVZ_vOlnZ2d@suscom.com.. .
> Does anyone know how to reprogram the factory key fob on a 2003 Tib after
> replacing the fob battery. I have 2 that are getting flaky after 4 years.
>