Hyundai Accent 2002 manual transmission . Wiper problems
Hello My windshield wipers stopped working after I cleaned them off after a snowstorm . I can hear the motor running but the wiper blades do not move. I believe they have become disconnected from the linkage or motor . My question is how do I remove the cowling to access the linkage ? Any other thoughts you have on this problem is greatly appreciated . Regards Mason |
Re: Hyundai Accent 2002 manual transmission . Wiper problems
On Thu, 29 Jan 2009 08:58:51 -0800 (PST), MASON cast forth these pearls of
wisdom...: > Hello > My windshield wipers stopped working after I cleaned > them off after a snowstorm . > I can hear the motor running but the wiper blades do not > move. I believe they > have become disconnected from the linkage or motor . My > question is how do I remove > the cowling to access the linkage ? Any other thoughts you > have on this problem > is greatly appreciated . > > Regards Mason The wiper arm secures to the shaft by a nut. Make sure the nuts are not loose. Hard to believe both would be loose at the same time, but if your wipers were frozen up when you turned them on, it is quite likely they would have spun against the nuts and loosened them. -- -Mike- mmarlowREMOVE@alltel.net |
Re: Hyundai Accent 2002 manual transmission . Wiper problems
MASON wrote:
> Hello > My windshield wipers stopped working after I cleaned > them off after a snowstorm . > I can hear the motor running but the wiper blades do not > move. I believe they > have become disconnected from the linkage or motor . My > question is how do I remove > the cowling to access the linkage ? Any other thoughts you > have on this problem > is greatly appreciated . > > Regards Mason How did you clean them off? Turn the wipers on when they were frozen in ice? Matt |
All times are GMT -4. The time now is 10:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands