GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Hyundai Mailing List (https://www.gtcarz.com/hyundai-mailing-list-137/)
-   -   Hyundai Elantra 2003 adding AMP, getting through firewall (https://www.gtcarz.com/hyundai-mailing-list-137/hyundai-elantra-2003-adding-amp-getting-through-firewall-54908/)

edavid3001@gmail.com 05-29-2007 11:29 AM

Hyundai Elantra 2003 adding AMP, getting through firewall
 
I have a 2003 Elantra. I'm trying to get a 6 gauge wire ran through
the firewall to connect an AMP in the trunk to the battery.

I'm having trouble finding a place to poke through. There is a place
near the brake wire where I could probably poke through, but that
would exit me behind the brake booster, which is somewhat tight. I
could remove the computer and poke through, but the computer is
attached somewhat wierd. There is some sort of epoxy attaching it to
the firewall and the firewall is cut and re-welded there, so I am a
bit concerned about that. Anywhere else, and I'm looking at removing
a lot more than I care to, afaik.

Anyone care to share how they went through the firewall? Thanks.


hyundaitech 05-29-2007 08:51 PM

Re: Hyundai Elantra 2003 adding AMP, getting through firewall
 
Throttle cable grommet?


mandarin 06-05-2007 04:23 PM

Re: Hyundai Elantra 2003 adding AMP, getting through firewall
 
I ran my power cable down the brake lines and under the car.

I ziptied them to the brake lines under the car the whole length, up and
over the suspension, and into the grommet under the spare tire.
Cover the cable with rubber if it touches any moving suspension parts, and
leave enough slack, if applicable (I didn't need to).
Works great. Shouldn't have any problems with it snagging if done correctly.

mandarin

<edavid3001@gmail.com> wrote in message
news:1180452560.483962.263030@u30g2000hsc.googlegr oups.com...
>I have a 2003 Elantra. I'm trying to get a 6 gauge wire ran through
> the firewall to connect an AMP in the trunk to the battery.
>
> I'm having trouble finding a place to poke through. There is a place
> near the brake wire where I could probably poke through, but that
> would exit me behind the brake booster, which is somewhat tight. I
> could remove the computer and poke through, but the computer is
> attached somewhat wierd. There is some sort of epoxy attaching it to
> the firewall and the firewall is cut and re-welded there, so I am a
> bit concerned about that. Anywhere else, and I'm looking at removing
> a lot more than I care to, afaik.
>
> Anyone care to share how they went through the firewall? Thanks.
>
>




edavid3001@gmail.com 06-07-2007 09:46 AM

Re: Hyundai Elantra 2003 adding AMP, getting through firewall
 
Wow. On the brake lines under the car or in the throttle grommet.
Maybe I am paranoid, but I'm not certain I like those options. I
worry the cable (it is 6 gauge) would make the throttle stick. I've
seen bad things happen to wire ran under a car. Of course, that was
wiring not done right. I don't know if I could do under the car
correctly.

I think I'll try unscrewing the computer and drilling with a new bit
at that location. There is nothing on the other side of the firewall
there except for noise insulation. All my other cars that I've put
amps in have had wiring grommets with enough space to add a power
wire. Not this one, though.

Thanks for the ideas.



All times are GMT -4. The time now is 07:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06564 seconds with 5 queries